Specifications

To... Press...
Increase the hours
Decrease the hours
House Current
Batteries
230V
CLOCK BATTERY
4.5V; AA,Size X 3
For critical recordings or disc playing
Operating the unit using the AC power is recommended.
Note:
■
If the battery power is low, "BATT-LOW" will be displayed during playback and the
playback will stop.
■
The unit will not operate from the internal batteries while the AC power cord is
connected to the unit.
■
Be sure to install batteries (“AA” x 3) to prevent the program preset in the memory
and the active countdown of the Timer from being cleared accidently in case of
power failure of disconnection of the power cord.
12V ; D, R20, size X 8
B GB
65
1
2
3
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Press Clock /Timer twice.
Result: CLOCK is displayed.
Press Program/Set.
Result: The hour flashes.
To... Press...
Increase the minutes
Decrease the minutes
6
When the correct time is displayed, press
Program/Set.
Result:
The clock starts and is displayed, even
when the system is in standby mode.
2,4,6 3,51
4
When the correct hour is displayed,
press Program/Set.
Result: The minutes flash.
Power Sources
Setting the Clock
■
AC power cord (supplied)
5
You can display the time, even when you are using another function, by press-
ing Clock/Timer once.
■
1 to AC IN
■
2 to wall outlet