Samsung R810 ( S C H - R 8 1 0 P O R T A B L E M O B I L E S e r i e s ) T R I - B A N D P H O N E User Manual Please read this manual before operating your phone, and keep it for future reference.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
GH68-22546A Printed in Korea. T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and other patents pending. Nuance®, VSuite™ and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries.
Table of Contents Section 1: Getting Started ..............................................4 Section 4: Menu Navigation ......................................... 34 Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4 Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Sending Options . . . . . . . . . . . . . . . . . . . . . . . . . . . Receiving New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RemoMail . . .
Section 13: Camera-Camcorder ................................ 126 Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 Taking Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Taking Snap Shots (Single Pictures) . . . . . . . . . . . . . . . . . . . 126 Screen Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Saving Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Camera Options .
Section 1: Getting Started This section explains how to start using your Samsung phone by activating your service, setting up your Voicemail, or getting an understanding of how this manual is put together. Understanding this User Manual The chapters of this manual generally follow the same order as the menus and sub-menus in your phone. A robust index for quick reference to most features begins on page 184. Also included is important safety information that you should know before using your phone.
Use the Travel Adapter Caution!: The touch screen responds best to a light touch from either a finger or a non-metallic stylus. Using excessive force or a metallic object when pressing the touch screen may damage the tempered glass surface and void the warranty noted (For more information, refer to “Standard Limited Warranty” .) The travel adapter included with your phone is a convenient, light-weight charger that rapidly charges your phone from any 120/220 VAC outlet. 1.
Install the Battery 3. Place the battery cover over the battery (1) and Note: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter. slide the battery cover up into place (2). Important!: You must fully charge the battery the first time you use your phone, otherwise you could damage the battery. From fully discharged to fully charged, the battery requires up to 4 hours of charge time. 1.
Turn Your Phone On Note: If you are outside of your carrier’s coverage or roaming area, the No Service icon ( ) appears at the top of the phone’s display. If you cannot place or receive calls, try later when service is available, or at another location. Press and hold the LOCK key ), on the top of the phone. K ( LO C 1. Turn Your Phone Off 䊳 Press and hold the LOCK key ( ), on the top of the phone, for two or more seconds. Your phone powers off.
2. Follow the prompts in the new user tutorial to setup your phone, as shown. mail box. Listen to Voicemail 1. In standby mode, touch the Dialer soft key, then touch and hold or dial your own mobile number to dial Voicemail. (For more information, refer to “Making a Call — Number Entry Dialing” on page 20.) After connecting, you will hear your voice greeting. 2. You are prompted to enter your password.
3. Slowly release your pressure on the card. It will slide outward a short distance. 4. Remove the memory card from the memory card slot. 5. If desired, install another memory card. (For more information, refer to “Install a Memory Card” .) 6. 9 Replace the microSD cover.
Section 2: Understanding Your Phone This section outlines some key features of your phone. It also describes the screen format and the icons that will be displayed when the phone is in use. Side Views of Your Phone Features of Your Phone • Full-screen Touch Screen [high-resolution (240 x400 pixels), color] • Widget menu • Full-HTML Browser • Messaging (Text, Picture, Video, and E-mail) with QWERTY Touch Keypad 10 • 2.
2. Power / Accessory Connector — Used to connect charging 8. accessories or any available accessory cables to your Locks and unlocks the keys and the touch screen and phone. 3. 4. Volume Key — Lets you adjust the ring volume in standby ringer during an incoming call. storage. Send Key — Lets you place or receive a call. In standby Clear Key — Deletes characters from the display when you previous menu or screen when navigating features on your phone.
Front View of Your Phone 2. Volume Key — Lets you adjust the ring volume in standby mode, adjust the voice volume during a call, or mute the ringer during an incoming call. 3. Display — Indicates the status of your phone (including numbers dialed, feature and function screens, status icons, message indicators and contents, signal strength, and so on) and shows all touch controls (hot buttons, keypads, and menus). 4. Send Key — Lets you place or receive a call.
9. Voice Recognition Key — Used to launch VoiceSignal voice 2. Mirror — Helps you take self-portrait photos. recognition system. 3. Battery Cover — Protects the battery. Rear View 4. Camera Key — Launches the Camera-Camcorder feature of your phone and takes pictures or records videos. Command Keys Power On-Off/LOCK key • Press and hold the Power On-Off/LOCK key ( ) to turn your phone on or off.
Soft Keys Functions for the soft keys are defined by what appears above each in the display. There are four soft keys across the bottom of the display. Send Key The Send key ( ) is used to answer calls, dial calls, and to recall the last number(s) dialed, received, or missed. • Press once to answer calls. • Enter a number and briefly press to make a call. • Briefly press in standby mode to display a list of recent calls to and from your phone. • Press twice in standby mode to call the most recent number.
3. The bottom line of the display shows available soft keys. The sample screen shows the following soft keys: • Dialer — Launches the Dialer screen that lets you place calls. • Contacts — Launches the Contacts list screen. • Messages — Launches the Messages menu. • Menu — Launches the Main Menu. 4. The center portion of the display shows information such as call progress information, messages, and photos. 5. Tapping the top line of the display pulls down a four-icon shortcut bar.
Note: During a phone call, the display backlight dims and turns off after 10 seconds to conserve battery power, regardless of the Backlight Time setting. (For more information, refer to “Backlight” on page 109.) Your Phone’s Modes Call Answer Mode You can choose to answer a call by pressing any key except or , or by pressing only the key. (For more information, refer to “Call Answer” on page 113.) Input Mode Input mode determines how you enter text, numbers, and symbols.
(For more information, refer to “Change Lock Code” on page 117.) Standby Mode Standby mode is the state of the phone once it has found service and is idle. The phone goes into standby mode: • After you power the phone on. • When you press the End key after a call or from within a menu. In standby mode, you will see the time, day, and date as well as all phone status icons. Enter/Exit Silent Mode Silences the ringers, the alerts, and the tones your keypad makes when you press a key.
䊳 In standby mode, press the Volume key up or down to set the call ringer volume as desired. • Exiting Music Player Mode — Press Options are: • • • • • Silence All Alarm only Vibrate only 1 Beep Low Note: For more information, refer to “Music Player” on page 146. • • • • Low/Medium Medium Medium/High High Note: The Vibrate icon ( ) appears in the display when the phone is in Vibrate mode. The No Ring icon ( ) appears in the display when the phone is in Silence All mode.
• Entering Camcorder Mode: – In standby mode, press and hold the Camera key ( ) — on the right side of the phone — then, select . – In standby mode, press the Menu soft key, then touch Multimedia ➔ Camcorder. – In Camera mode, press . • Exiting Camcorder Mode — Press the key. Video Player Mode The Video Player in your phone can play video files [3GS, MP4, H.263, and H.264 (Decoding: QCIF Only)], but only if they are stored in the My Video folder in the phone or on an optional microSD Memory Card. 3.
Section 3: Call Functions This section explains how to make or answer a call. This section also includes the features and functionality associated with making or answering a call. Making a Call — Number Entry Dialing 1. In standby mode, touch the Dialer soft key. The touch 1. In standby mode, touch the Dialer soft key. The touch keypad screen appears in the display. 2. Enter 911 using the touch keypad. 3. Touch or the Voice Call soft key to place the call.
Manual Pause Calling When you call automated systems (like banking services), you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Contacts along with special characters called pauses. • Wait — Hard Pause — Stops the calling sequence until you touch . • 2-Sec Pause — Stops the calling sequence for two seconds and then automatically sends the remaining digits.
4. To select a number other than the marked Contacts entry’s default number, touch the radio button to the right of the number you want to display and touch Add. The entry’s Example: For Speed Dial number 003, touch the Dialer soft key, then press and hold until the name and number appear in the display and the number is dialed. Two-Touch Dialing Memory locations 010 through 030 are special Two-Touch dialing locations. information appears in the display. 5. • Touch the entry you wish to dial.
Favorites Screen Dialing You can also dial Contacts entries with assigned Speed Dial numbers from the Favorites screen. 1. In standby mode, touch the 3. Find and touch the desired Favorite. Two buttons pop-up in the display. 4. To call the selected Favorite, touch . Dialer soft key. The touch keypad screen appears in the display. 2. Touch the Favorites button ( ). The Favorites screen appears in the display.
Voice Dialing Tips: • Say “No” to hear the next name. • Say “Repeat” to hear the names again. • Say “Cancel” to exit Voice Service without dialing. (For more information, refer to “Confirmation” on • Wait for the beep before speaking. • Speak clearly at a normal volume, as if you were talking to someone on the phone. • When saying a name, say the first name then the last name. page 87.) Dialing a Name If the recognized/selected name has multiple numbers To dial a name, do the following: 1.
2. Say “Call”. VoiceSignal prompts you to “Say the name or #”. 3. Speak clearly and say the telephone number of the person you want to call. For example, say “7 8 1 9 7 0 5 2 0 0." If it recognizes the number, Voice Dial repeats and dials the number. If Voice Dial is not sure it has recognized the number, it displays and prompts you with “Call?” followed by a choice list of up to three numbers. 4. Do one of the following: • Touch one of the number buttons. • Say “Yes” to confirm the first number.
Tip: You can set your phone to answer calls automatically or when you touch any key but . (For more information, refer to “Call Settings” on page 113.) Review the Calls Log 1. Menu soft key, then touch Ignoring a Call Calls. The Calls list appears in the display showing All When you ignore an incoming call, the call is immediately forwarded to your voice mail. 䊳 During an incoming call, touch the key. The caller is calls. 2. forwarded to your voice mail.
Note: In cases where a Calls log entry concerns a call to or from a Contacts entry, the Contact name associated with the number appears in the Calls log list instead of the number. 4. The following functions are also available: • Erase — Touch this soft key to delete selected or All unlocked calls from the displayed call log. • Lock / Unlock — Touch this soft key to block/permit deletion of individual calls.
4. The call information screen offers the following options: • • • • • • • — Touch to dial this number. — Touch to send a Text, Picture, or Video message to this number. (For more information, refer to “Creating and Sending New Messages” on page 59.) Contacts only — To view Contact information for this call, touch the View details soft key. To add the number to your Contacts list, touch the Add To Contacts soft key. To delete the selected call from your Outgoing calls log, touch the Erase soft key.
4. The call information screen 5. offers the following options: • — Touch to dial this number. • • • • • • — Touch to send a Text, Picture, or Video message to this number. (For more information, refer to “Creating and Sending New Messages” on page 59.) To add the number to your Contacts list, touch the Add To Contacts soft key. Contacts only — To view Contact information for this call, touch the View details soft key.
3. Select a call to view further • To copy this number to the Dialer screen so that you can make changes (such as, to add Pauses) before reuse, touch the Copy to dialer soft key. information about it. The call information screen shows the caller’s name (Contacts only), the number called received from, the time and date the Note: When viewing a missed call from a Contact, touch the More soft key to access the Lock / Unlock and Copy to dialer options. 5. duration of the call. 4.
• — Touch to send a Text, Picture, or Video message to this number. (For more information, refer to “Creating and Sending New Messages” on page 59.) • To add the number to your Contacts list, touch the Add To Contacts soft key. • Contacts only — To view Contact information for this call, touch the View details soft key. • To delete the selected call from your Calls log, touch the Erase soft key. • To block / permit deletion of the selected call, touch the Lock / Unlock soft key.
5. To review another Data call, touch the Left and Right arrow 3. keys at the top of the screen. Call Timer View the duration of your last call, total calls, and calls made during the life cycle of you phone using the Call Timer feature. Note: Call Timer is not for billing purposes. 1. In standby mode, touch Menu ➔ Calls. 2. Touch the Call Timer soft key. The following options appear in the display: • Last Call — View the duration of your last call.
• Lifetime Data Counter — View the total amount of data sent or received by your phone since activation (Lifetime Data Counter cannot be reset). 3. Touch the Reset soft key to reset all counters except Lifetime Data Counter. Note: Although Total data counters can be erased, the Lifetime Data Counter can never be erased. Roaming What is Roaming? Roaming lets you use your phone when you travel outside of your Wireless Provider’s coverage area.
Section 4: Menu Navigation This section explains the menu navigation for your phone. It also describes the menus available with your phone. Main Menu Navigation Using the Widget Bar 1. right arrow tab on the left Access menus using the Menu soft key, other soft keys, or icons on the Widget Bar or Shortcut Bar. 1. edge of the display. The Widget Bar slides open to the right and lists icons for those In standby mode, touch the Widgets selected in the Menu soft key. The Main Widget settings.
3. Touch, hold, and slide the icon to the right until it is free of the Widget Bar. The icon now displays on the standby screen and expands in size. Note: You can position a Widget icon as needed by touching, holding, and sliding it. The In-Use Options Access numerous menus and features even while in a call. Note: If the call is disconnected while accessing the In-Use Option, the InUse Option disappears from the display and the phone eventually returns to standby mode. 1. 4.
With Bluetooth on and a Bluetooth headset connected with your phone, switches the call sounds from the Bluetooth Headset and back to the phone. Mutes/unmutes the microphone on your phone. Allows you to speak to someone else without being overheard by the other party on your call. Opens the Memo Pad. (For more information, refer to “Memo Pad” on page 95.) Launches the Messages menu. (For more information, refer to “Messaging” on page 59.) Ends the current call and returns the phone to Standby mode.
Launches the WEB browser. (For more information, refer to “WEB” on page 76.) Launches the Music Player. (For more information, refer to “Music Player” on page 146.) Opens the Bluetooth screen. (For more information, refer to “Bluetooth” on page 90.) 2. To close the Shortcut Bar, tap the folder tab again or touch .
Section 5: Understanding Your Contacts This section explains how to manage your daily contacts by storing their name and number in your Contacts. Contacts entries can be sorted by name. Your Contacts List Your Contacts list can store up to 500 entries, with each contact having up to five associated phone numbers, an e-mail address, and a picture ID. Each phone number can be up to 32 digits in length, including hard pauses. Contact names can be up to 32 characters in length.
3. Touch the Name field. The Contact to a Group. This lets you send messages to and associate with the new Contact. (For more information, refer to “Entering Text” on page 52.) Touch a phone number field (Mobile, Mobile 2, Home, Work, or Fax) or the e-mail address (E-mail) field. The 3X4 Keypad text entry screen appears in the display. • If desired, select another text entry screen. (For more information, refer to “Changing Text Entry Screens” on page 52.) 6.
9. If desired, enter an additional phone number (Mobile 2, 1. Home, Work, or Fax) or e-mail address (Email) for the new available) appear in the display. 2. photo ID field. The following options pop-up in the display: • Take Photo — Launches the Camera so you can take a photo for this Contact. • My Images — A Select list of all of your photos appears in the display. (For more information, refer to “My Images” on page 79.
The following (number type) icons appear in the display: 6. Touch Update Existing. The Contacts screen appears in Mobile Home Work the display showing your current Contacts list. Fax 7. 5. Touch the Search field and enter the first few characters Select the number type that matches your new entry. The of the Contacts entry name New Contact screen appears in the display with the under which you will store the number being save populating the selected number type saved number. (For more field.
10. Make any added changes you wish to the Contacts entry. 4. (For more information, refer to “Editing an Existing Contact The associated Call Information screen appears in the Entry” on page 44.) 11. To save the Contacts entry, touch the Save soft key. display. 5. options: You can store numbers from the Calls logs to your Contacts. • Add New Contacts — Lets you create a new Contacts entry. • Update Existing — Lets you add the selected number to an existing Contacts entry.
2. “Say a Command” appears in the display and is Keypad Methods pronounced through the speaker. Find by Name Say “Lookup”. VoiceSignal prompts you to “Say the name or #.” 3. Speak clearly and say the full name of the person you want If you have stored a named contact in your Contacts list, Find lets you locate the entry quickly. 1. to call, exactly as it is entered in your contact list. • If VoiceSignal recognizes the name you said, the contact information for that name appears in the display.
Group This option lets you find a Contacts list entry with a specific Group name. 1. In standby mode, touch the Contacts soft key. The Contacts screen appears in the display with an alphabetical list of Contacts showing. 2. Touch the Down arrow button • To rename the Group, touch the Rename soft key. • To remove this Group and return all its members to the General group, touch the Erase soft key. • To send a text or picture message to selected Contact(s) in the current Group, touch . 6.
6. When you’re finished editing the entry, touch the Save soft 2. key. Your changes are saved and a confirmation message appears in the display. Adding Pauses to Contacts Numbers When you call automated systems (like banking services), you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Contacts along with special characters called pauses. • Wait — Hard Pause — Stops the calling sequence until you touch .
The following menu options pop-up in the display: • Wait • 2-Sec Pause 6. Select the pause option of your choice to enter it into your 5. Touch the Done soft key to add the number or Email address to the existing entry. Edit an Existing Email Address 1. Find the desired entry in the Contacts list. (For more number sequence. information, refer to “Finding a Contacts Entry” on 7. Touch the Done soft key. page 42.) 8. When you’re finished entering pauses, touch the Save soft 2.
Speed Dial Numbers 2. Assigning a Speed Dial Number 1. Touch a Speed Dial number. The Contacts screen appears in You can assign and change Speed Dial numbers for Contacts entries. the display. 3. Find and touch a Contact entry. In standby mode, touch the (For more information, refer to Dialer soft key, then touch the “Finding a Contacts Entry” on Favorites button ( page 42.) A dot appears in the ). The Favorites list appears in the selected Contact’s check display. circle.
Changing Speed Dial Numbers 1. 3. Touch and drag one or more In standby mode, touch the Contacts to other Favorites Dialer soft key, then touch the positions. Favorites button ( ). The Favorites list appears in the display. 2. Touch the Change Order soft key. The Favorites list changes, as shown. Note: The Voicemail favorite (1) is deactivated to prevent you changing it. Tip: To scroll the Favorites list, touch the Volume key (on the left side of the phone) up or down. 4.
Removing Speed Dial Numbers 1. 3. Touch the Remove button ( In standby mode, touch the for one or more assigned Dialer soft key, then touch the Favorites. Favorites button ( ) ). The Favorites list appears in the display. 2. Touch the Remove soft key. The Favorites list changes, as shown. Note: The Voicemail favorite (1) is deactivated to prevent you removing it. Tip: To scroll the Favorites list, touch the Volume key (on the left side of the phone) Up or Down. 49 4.
Renaming a Contacts Group Use this option to rename a Group in your Contacts list. 1. 2. In standby mode, touch the Menu soft key and touch 7. Deleting a Contacts Entry 1. information, refer to “Finding a Contacts Entry” on an alphabetical list of Contacts showing. page 42.) Touch the Down arrow button at the top right corner of the • General • Family • Friends • Colleague • Business 3. Touch the Rename soft key.
3. Select the Contacts entry you wish to send. A check mark appears in the entry’s check box. Repeat this step for all other Contacts entries you wish to send. 4. When you have marked all the entries you wish to send, touch the Send soft key. The Choose device screen appears in the display. 5. Select the receiving device. Your phone automatically connects with the other device and sends the selected Contact entry(ies).
Section 6: Entering Text This section describes how to select the desired text entry mode and screen when using these options: the phone-style touch keypad, the QWERTY touch keypad or the divided or full-screen handwriting recognition panel. Changing Text Entry Screens Phone-Style (3X4) Touch Keypad This is the phone-style touch keypad for entering text, numbers, and/or characters (such as punctuation and polarity signs) that you can access by doing the following: 1.
Built-in QWERTY Keypad Your phone has a keyboard-style touch keypad, commonly called QWERTY, this is the default text entry screen for most features and functions that require you to enter text, numbers, and/or characters (such as punctuation and polarity signs). Using the QWERTY keypad, you can type letters, numbers, punctuation, and other special characters into text entry fields or other applications more simply and faster than using the phonestyle keypad.
Handwriting Recognition Screens Accessing the Full-Screen Handwriting Recognition Screen Your phone also can recognize print handwriting. Just print letters or numbers, and your phone translates it to text in a screen font. The full-screen Handwriting Recognition screen offers an integrated message text and handwriting input field.
8. When you are finished writing your text, touch the Done soft key to save your writing. 9. To correct any handwriting recognition errors, touch the down arrow (at the upper right corner of the screen), then select 3X4 Keypad or QWERTY. Changing the Text Entry Mode Text messages can be made up of alphabetical characters, numbers, and symbols.
• T9Word • T9word • T9WORD • 123 2. Select the desired text entry mode. 3. To change to Symbols mode, touch the Symbols soft key. Changing QWERTY Keypad Text Entry Mode 䊳 While composing a text message or memo, to change text entry mode: • To select abc mode, press . – To toggle between abc and ABC modes, press . • To select 123-Symbols mode, press or . – To select additional Symbols mode, press . • To select Shortcuts mode, press .
– Pause briefly and the displayed letter is accepted and inserted into your message. – Press to enter a space and press to enter a period. If more than one word shares the same numeric sequence, T9 Word provides the most commonly used word, any additional words appear in a scrollable pop-up list, in which you can select a preferred word. Note: To enter a space, press . To enter a period, press . These key functions apply to both T9 Word and Abc modes. For other symbols, see “Entering Symbols” on page 58.
Entering Symbols Enter symbols (such as “@” or “%”) into a text message while in Symbols mode. 䊳 While composing a text message, enter symbols by using one of following keypads: • Using the phone keypad: – Touch the Symbols soft key. The first of four symbol screens appears in the display. – Use the Prev and Next soft keys to page through the other symbols, if desired. – Touch the key labeled with the symbol that you wish to enter. – Repeat these steps to insert additional symbols into your message.
Section 7: Messaging This section explains how to create, send, receive, and view different types of messages. This section also describes the features and functionality associated with messaging. Creating and Sending New Messages This section guides you through procedures for creating and sending text, picture, and postcards. Creating and Sending a Text Message 1. In standby mode, touch the Messages soft key, then touch Send Message ➔ Text Message.
– Select individual Contacts or touch Select All. Check marks appear in the check boxes for the selected Contacts. – Touch the Add soft key. You are returned to the To list. • To select a phone number from a Recent Call as a recipient, touch the Recent Calls button. The Calls screen appears in the display. – If desired, touch the down arrow button in the upper right corner of the screen, then touch All, Incoming, Outgoing, or Missed calls. – Select individual calls or touch Select All.
screen appears in the display showing the To list. 4. Tip: You can also access Messages by touching the Menu soft key and selecting Messages. 2. Address your message as you would a Text message (see “Creating and Sending a Text If desired, touch the Subject field. The 3X4 Keypad screen appears in mixed-case mode. Note: You can use any of the phone’s four text entry screens to enter your message text. (For more information, refer to “Changing Text Entry Screens” on page 52.) Message” on page 59). 3.
• To access your photo gallery, touch My Images. With pictures in the gallery, a list of thumbnail images appears in the display. Select the desired photo and touch the Send soft key. You are returned to the (For more information, refer to “Message Sending Options” on page 65.) • To save your Picture message as a draft, touch Save As Draft. • To preview your Picture message as the recipient(s) will see it, touch the Preview soft key. • To make changes to your message, touch the Back soft key.
3. Touch the Send soft key ( ). If necessary, your phone resizes your picture for sending, then the Picture Msg screen appears in the display showing the To list. 4. Address your message as you would a Text message (see “Creating and Sending a Text Message” on page 59). 5. Note: For more information, refer to “Creating and Sending Postcard Messages” on page 143. Creating and Sending a Video Message 1.In standby mode, touch the Messages soft key, then touch Send Message ➔ Video Message.
4. Enter the Subject text. (For more information, refer to 9. • To use pre-composed text, touch the Add Quick Text soft key, then select the desired Quick Text to add to your message. 5. If desired, repeat steps 3 and 4 for the Text field. 6. To add a video clip to the message, touch the Video field. You are prompted to Take a Video or to add a video clip from the My Videos folder. • To activate the phone’s camcorder and record a new video clip, touch Take Video.
4. Using the display as a viewfinder, when the image that you Message Sending Options wish to send appears in the display, touch the Camera key You can set priority, validity, and other options before you send a message. Which options appear in the Sending Options list depends on what type of message you have composed and what message field you have highlighted. ( ) to record a video. The time counter at the bottom of the Camcorder viewfinder screen indicates recording time in seconds. 5.
3. To save your settings, touch the OK soft key. You’re returned to the message creation screen. Receiving New Messages When you receive a message in standby mode, one of the following occurs: • If Auto View is set to On — An alert sounds (unless turned off) and the Frank message text automatically appears in the display and scrolls slowly to the end of the message. (For more information, refer to “Message Settings” on page 71.
Note: Only text messages appear in the Chat With screen. • To view details about the last message in the Chat With screen, touch the View Last Msg. soft key. • To erase selected or All messages listed in the Chat With screen, touch the Erase soft key. • To access additional options, touch the More soft key: – Forward — Forward a copy of a selected text message listed in the Chat With screen. – Add to Contacts — Adds the originator of an incoming text message to your Contacts list.
• To forward the message to other recipients, touch the Forward soft key. • To delete the message, touch the Erase soft key, then touch the Yes button. • To access other options, touch the More soft key. The following options appear in the display: – Add To Contacts — Lets you add the sender’s number or E-mail address to your Contacts list. – Lock / Unlock — Blocks or allows erasure of the message. – Save Quick Text — Saves the message text as a Quick Text entry.
– Message Info — Lets you display status information about a message. Select an option to perform the function for that option. Drafts Folder Messages in the Drafts folder are those that have been composed but never sent. You can return to the Drafts folder at any time to view, edit, or send a draft message. 1. In standby mode, touch the Message soft key, then touch Drafts. A list of your draft messages appears in the display. 2.
Checking your Voicemail New voice messages in your voice mailbox are logged in the Voicemail folder of the Messages menu. Open the Voicemail folder to view the Callback # (if available), Urgency, and other details of new voicemail messages. 1. In standby mode, touch the Dialer soft key, then touch and hold Note: This function erases all messages in a selected message folder or in all message folders.
Message Settings The Message Settings let you customize your phone’s messaging to suit your preferences. 1. In standby mode, touch the Messages soft key, then touch Message Settings. The Message Settings screen appears in the display listing the following options: • Auto Save/Auto Erase — Lets you set your phone’s messaging to: – Automatically save unsent messages to the Outbox folder, to discard them, or to prompt you to elect to save/discard unsent messages.
RemoMail You can use your phone to access your personal or business e-mail account(s). 1. In standby mode, touch Menu ➔ RemoMail. 2. Touch the Yes soft key. The catalog appears in the display. 3. Select and download the RemoMail application. 4. Follow the prompts that appear in the display to setup your phone to access an e-mail account.
Section 8: Downloads (Brew) With Mobile Shop, you can download full featured applications over the air including games, personalized ring tones, pictures, and more. You can send and receive instant messages and email, or browse the web to catch up on all the latest news. 1. This section outlines how to obtain games and other applications for your phone. For more information, contact your Wireless Carrier. 2. Launching Downloads 1. In standby mode, touch MENU ➔ Downloads.
• View Log — View the Mobile Shop log, which displays information about recent activity using Mobile Shop. 2. Touch the desired option to enter the option’s sub-menu and view or change settings. Using On-line Help The Help sub-menu within Downloads is a short tutorial on several Brew-Mobile Shop features. View information about charges, cancelling subscriptions, buying apps, disabling apps, and more. 1. At the Downloads menu, touch Help.
Disabled Apps You can install new apps even if the memory of your phone is full by partially removing (disabling) apps you haven’t used recently. When you need to use a disabled app, you can restore it at no additional purchase cost. Restoring Apps Disabled apps can be quickly restored at no additional purchase cost. To restore an app, run the application you want to restore from the Main Menu. You will be guided through the restoration process.
Section 9: WEB This section outlines how to launch the Browser, how to navigate to other pages on the web, and how the keys on the keypad are used with the web application. Additionally, links to other sites are briefly discussed. A list of categories (each representing one or more web sites) appears in the display. Browser Indicator With the Browser, you can conveniently surf the web and download ringtones and wallpapers using your phone.
Browser soft keys At the bottom of the Browser screen is a bar that contains browser commands. The Left and Right soft keys are used to execute the browser commands that appear in their respective corners of the display. These are called “soft keys” because their function changes depending on the application. Using Links remains stored in the phone (if you leave your phone turned on). You can access this information without reconnecting to the Internet.
• Simple text. You can act upon options or links by selecting them. Using Links Links have several purposes, such as jumping to a different page, to a different site, or even initiating a phone call. Links are shown inside of brackets ([ ]). You can normally select a link. How the Buttons Work The top and right side of the screen contain control bars. The following table lists buttons that appear in the control bars and their functions and the key. Back — Displays the previously viewed web page, if any.
Section 10: Multimedia This section outlines your phone’s multimedia functions and key features associated with multimedia. Accessing Multimedia 1. In standby mode, touch the Menu soft key, then touch Multimedia. The following Multimedia sub-menus appear in the display: • Camera — Lets you launch and set up your phone’s camera. (For more information, refer to “Camera-Camcorder” on page 126.) • Camcorder — Lets you launch and set up your phone’s camcorder.
• Serve as the background for a Postcard message. 1. From the Multimedia menu, touch My Images. If there are no pictures stored in your phone or on a Tip: You can also access My Images from: -The Camera screen, by touching the Gallery button. memory card, “Empty” appears in the My Images screen. 2. Touch a picture to enlarge it for easier viewing. • To launch the camera to take a picture, touch the More soft key and touch Camera. (For more information, refer to “CameraCamcorder” on page 126.
– Rename — Lets you rename the picture. – Lock / Unlock — Lets you protect the picture from being deleted. – Print — Sends a printout of the picture to a Bluetooth-compatible printer. – Slide Show — Shows the available images as a sequence of fullscreen pictures. – Image Info — Displays information about the picture, such as the picture Name, creation Date and Time, Resolution, and the data Size. 2. Camcorder. The camcorder view finder screen appears in the display.
• Camcorder — Lets you record a new video clip. • Move to card/phone — Lets you move the video from the phone to a memory card or from a memory card to the phone. • Copy to card/phone — Lets you save a copy of the picture to the phone or to a memory card. • Rename — Lets you rename the selected video clip. • Lock / Unlock — Lets you protect a video from being deleted. • Video Info — Displays information about the video, such as the picture Name, Date, Time, Resolution, the data Size, and Duration.
• Ringtone Info — Displays information about the selected file, such as the file name, the file type, and the data size. 6. Select the desired option. My Sounds My Sounds lets you record voice memos and lets you assign preloaded and downloaded sound files as ringers for calls, alarms, and other alerts. 1. the sound file in a picture message. 3. To play a sound file, touch it. The Sound Player screen appears in the display. Select one of the following options From the Multimedia menu, touch My Sounds.
Voice Memo You can use your phone to record voice memos and other sound files for later playback or assignment as ringers. (For more information, refer to “Ringer Type” on page 111.) 2. Touch the desired option. The Voice Recorder screen 3. Touch the Record button appears in the display. ( ), then start speaking. As it is recording the phone displays a countdown timer Note: The maximum length for a voice memo in “Limit for Message” mode is 60 seconds.
2. Touch the voice memo you wish to review to play it. The Sound Player screen appears in the display. • To stop the memo playing, touch . Touch to restart playing the memo. When the voice memo finishes playing, the selected voice memo remains highlighted in the list of sound files. Erase One or More Voice Memos 1. From the Multimedia menu, touch My Sounds. A list of sound files appears in the display. 2. Touch the Erase soft key. The Select to Erase screen 3.
Section 11: Tools This section explains how to use your phone’s digital assistant functions to view today’s calendar, schedule events, set reminders, perform calculations, and more. Accessing Your Phone’s Tools To launch the Tools menu: 䊳 In standby mode, touch the Menu soft key, then touch Tools ( ). The Tools menu appears in the display. Voice Service Your phone includes state-of-the-art voice recognition software that lets you use your voice to dial numbers, access your Contacts list, and open Tools.
• • • • • 87 saying the digits in the number. (For more information, refer to “Using Voice Dial” on page 23.) Send Text — Lets you access Create Text Message. Send Picture — Lets you access Create Picture Message. Lookup — Lets you find a Contact by name and review the Contact’s information.
2. • Never Confirm — Voice Service never asks for your confirmation. Select your preferred setting. 3. To save your selection, touch the OK soft key. To discard the new setting, press . You are returned to the Voice Settings menu. Adaptation If you regularly have trouble with Voice Service not recognizing the commands, names, and/or numbers you say, try adapting Voice Service to your voice.
After 15 phrases and sets of digits, adaptation ends and 2. Select the preferred setting. your are returned to the Adaptation screen. 3. Touch the OK soft key to accept the new setting. Press to discard the new setting and return to the Voice Reset Voice To reset Voice Service to factory default settings, do the following: 1. From the Tools menu, touch Voice Service ➔ Voice Settings ➔ Adaptation ➔ Reset Voice. The phone prompts you to confirm voice adaptation reset. 2.
About This option displays version and build information about the Voice Service software included on your phone. 䊳 From the Tools menu, touch Voice Service ➔ Voice Settings ➔ About. send or receive information via Bluetooth. To save battery life or in situations where Bluetooth use is prohibited, such as airline traveling, you can turn off the Bluetooth wireless technology headset. Turn Bluetooth On 1. The About screen appears in the display showing the Bluetooth.
Add New Device Searching for Available Bluetooth Devices 1. From the Tools menu, touch The Device Info screen appears in the display, showing the selected device’s name, Type, Status, and Address. 5. Return to the Bluetooth screen by touching the OK soft key. 6. Touch, hold, and slide the identified icon to overlap the Bluetooth. The Bluetooth Search button. You are prompted to enter the passkey or screen displays. 2. Place the Bluetooth device you want to pair with your phone in discoverable mode.
Paired Icons The Bluetooth screen shows the icons for Bluetooth wireless technology devices paired with your handset. 1. From the Tools menu, touch Bluetooth. Icons for registered Bluetooth devices appear in the display. Connecting to a Bluetooth Device 1. In the Bluetooth screen, touch, hold, and slide the icon for the preferred device to overlap the SEARCH button. The SEARCH button and the device icon flash and are highlighted in blue to indicate the connection is complete. 2.
Bluetooth Settings 1. To access the phone’s Bluetooth settings, in the Bluetooth screen, touch the Settings soft key. The Phone Settings screen appears in the display showing the following options: • My Phone’s Name — Shows your device’s name. You may change this name. Just select the name and enter your text changes. • Discovery Mode — Allows other Bluetooth devices to see your device as accessible. Touch On for other devices to see your device, or Off for no visibility.
Add a New Event 1. From the Tools menu, touch Calendar. The calendar appears in the • Alarm — Touch Off / 10 Mins Before / 30 Mins Before / 1 Hour Before / 1 Day Before / 1 Week Before / Customize (select particular number of minutes, hours, or days before the Start Date and Start Time). 6. For additional New Event options, touch the Set Details soft key. display with the current date highlighted. The month and year appear at the top of the display. 2. Highlight the desired date.
View/Change an Event 1. From the Tools menu, touch Calendar. 4. options appear in the display: A calendar appears in the display with the current date highlighted. The month and year appear at the top of the display. 2. Navigate to and select a desired date. (For more information, refer to “Navigating the Calendar” on page 93.) The calendar is replaced by the Daily View for the selected date, listing all events scheduled for this date. 3. • Monthly View — Returns you to the Calendar screen.
3. 4. Enter text for this Memo. (For more information, refer to touch the Send text message soft key. The memo text appears in the Text Msg screen as part of the message To discard this Memo, touch and hold memo text, then press text. to erase the again to return to the Memo Pad screen. Review, Edit, Erase, and Send Memos 1. From the Tools menu, touch Memo Pad. A list of any stored Memos appears in the display. 2.
Set an Alarm 1. From the Tools menu, touch Alarm Clock. The Alarm screen appears in the display, listing any currently set alarms. 2. • Snooze — Select On to enable snooze timer for this alarm, then select values for the following options: – Snooze Duration — Select 1min, 2min, 3min, 5min, 7min, or 10min. – Snooze Repeat — Select Once, Twice, 3 Times, 5 Times, Or 10 Times. 3. When you’re finished selection option values for the alarm, touch the Save soft key.
2. Touch the Off button on the Alarm you wish to turn off. Erasing an Alarm 1. From the Tools menu, touch Alarm Clock. The Alarm World Time World Time lets you set up to four clocks to the time of day or night in any of the 24 different time zones around the world. screen appears in the display, listing any currently set alarms. 2. Touch the Erase soft key. The Select to erase screen appears in the display. 3.
Setting a World Clock The home clock is set to a default time and city and is labeled with the name of the city. To change this or another World Clock setting, do the following: 1. 5. Adding a World Clock 1. Clocks. 2. screen appears in the display 2. the display. 3. you see the city whose time set to a new time zone. The Add City screen appears in the you wish to select as this Touch and slide the map until you see the city whose time clock’s new time. 4.
Selecting Your 2nd Clock Your 2nd Clock and your Home Clock both appear in the Clock widget when you move it from the Widget Bar to the standby screen. By changing your 2nd Clock, you can quickly and easily keep track of the time in a new city and at home. (For more information, refer to “Widget” on page 106.) 1. 1. From the Tools menu, touch World Time. The World Time screen appears in the display listing your current World Clocks. 2. Touch the Erase soft key.
Stop Watch screen appears in the display. 2. You can use this function to set a stop watch. Enter the first number in your calculation using the 1. calculator-style touch Stop Watch. The Stop Watch to 15 digits long, and can screen appears in the display. 2. include a decimal point digits.) 3. lap times, touch the LAP soft [You can nest calculations key at the start of each delete your last entry, touch succeeding event/lap to record the completion time for the previous event/lap. You .
Converter The conversion menu provides the following conversion categories: • Currency • Length • Weight • Volume • Area • Temperature Using Converters To convert a currency, length, weight, volume, area, or temperature, do the following: 1. From the Tools menu, touch Converter. The following list of converters appears in the display: • • • • • • Currency Length Weight Volume Area Temperature 2. Select the conversion feature you wish to use. 3.
4. Enter the changed exchange rate value. 5. Touch the Done soft key to save the changed exchange rate. Currency — Adding Exchange Rates You can use the Currency Converter to convert from and to obscure currencies by adding exchange rates for these currencies. To add a currency and its exchange rate to the Currency Converter, do the following: 1. From the Tools menu, touch Converter ➔ Currency. Tip: From any Converter screen, touch 2. . Touch the View Rates soft key.
6. Enter an identifier of up to 4 characters for the new 3. Touch the Erase Rates soft currency. (For more information, refer to “Entering Text” key. The Select to Erase on page 52.) screen appears in the display, 7. Highlight the exchange rate field. listing those rates you can 8. Enter a decimal exchange rate for the new currency using the keypad.
Tip Calculator Tip Calculator automatically calculates the following amounts: • Gratuity (tip) • Individual payment (for groups) Calculations are based on the total amount of the check, a selected gratuity percentage, and the number of people paying. 1. From the Tools menu, touch Tip Calculator. The Tip Calculator screen appears in the display. 2. Touch the Bill field and enter the total amount of the bill. 3. Touch the Tip field and enter a tip percentage. 4.
Section 12: Changing Your Settings This section explains how to customize your phone to suit your needs and preferences. Settings Menu 䊳 To access the Settings menu, select Menu ➔ Settings. The Settings menu appears in the display. Location This function identifies your location to the network via the Global Positioning System (GPS). You can set this function for continuous operation or to operate only in the event that you dial 911.
• Calculator — Launches Calculator tool. • Calendar — Launches Calendar tool. • Help — Lets you access your Wireless Carrier’s on-line Help service. 2. To enable/disable a particular widget, select the associated • Banner — Lets you create your own personalized greeting that appears in the display when your phone is in standby mode. • Backlight — Lets you set backlight options for the LCDs, keypad, and set the brightness. 2. Select the desired sub-menu.
Wallpaper To set an image without Wallpaper lets you choose the pictures that appear in your phone’s displays while in standby mode. previewing it, touch the radio From the Settings menu, blue dot appears in the radio 1. button to the right of a preferred picture or image. A select Display Settings ➔ Wallpaper. A scrollable list of thumbnail images appears in the display. 2. To preview an image, select the image. An expanded view appears in the display. – Or – button. 3.
Banner Create your own personalized greeting that appears in the display while your phone is in standby mode. 1. From the Settings menu, select Display Settings ➔ Banner. The Banner screen appears in the display. 2. Select the Banner field and enter a word or short phrase (up to 12 characters) to appear in your phone’s display while in standby mode. (For more information, refer to “Entering Text” on page 52.) 3. Select the preferred Display setting: On (banner displays), Off (banner does not display).
Sounds Settings The Sounds Settings menu provides a variety of options to customize audio properties for such things as ringers, keypad tones alerts, and more. Volume Volume lets you adjust the loudness of the sounds your phone produces. 1. From the Settings menu, select Sounds Settings ➔ Volume. The Volume screen appears in the display showing the following options: • Master Volume — Controls the loudness of all phone sounds.
4. To preview your new setting, touch the Play soft key. To end the preview, touch the Stop soft key. 5. To retain your setting, touch the Set soft key. Your are returned to the Volume screen. 6. To save your new settings and return to the Sound Settings menu, touch the OK soft key. • Pic/Video Message — Lets you select which ringtone or sound file plays when you receive a Picture Message or Video Message.
6. To save your new ringer settings and return to the Sound Settings menu, touch the OK soft key. Alerts You can set your phone to sound an alert whenever you enter or leave your service area, connect or disconnect a call, as well as other options. 1. From the Settings menu, select Sounds Settings ➔ Alerts. The following Alerts options appear in the display: • Minute Beep — Sounds an alert ten seconds before each elapsed minute of a call.
Call Settings Call Answer You can select a specific answer mode when you receive an incoming call. 1. From the Settings menu, select Call Settings ➔ Call Answer. The following call answer settings appear in the display: • Any Key — Touch any key except the or Left soft key to answer an incoming call. • Send Key — Press to answer an incoming call. Tip: You can set your phone to answer calls automatically, without any input from you. (For more information, refer to “Auto Answer” on page 113) 2.
1. From the Settings menu, select Call Settings ➔ Speed Dial. • On — Enables the speed dial keys. • Off — Disables the speed dial keys. 2. Select the desired setting and touch the OK soft key to save your selection. TTY Mode Your phone is fully compatible with TTY equipment used by those who are hearing impaired. TTY equipment is connected to your phone through the headset connector on the top of the phone. TTY Mode must be enabled before you can use your phone with a TTY device. 1.
4. Select the desired TTY Mode setting and touch the OK soft key to save your selection. Note: The TTY icon ( ) appears in the top of the display when the phone is in standby mode. Voice Privacy Voice Privacy when enabled (that is, set to Enhanced), turns on advanced voice encryption. 1. From the Settings menu, select Call Settings ➔ Voice Privacy. The following settings appear in the display: • Standard — Voice privacy is disabled • Enhanced — Voice privacy is enabled 2.
Language. The following settings appear in the display: • English • Español 2. Select the desired Language setting and touch the OK soft key to save your selection. Vibration Feedback When set to On, Vibration Feedback causes your phone to vibrate as well as play a tone when you touch a key, button, or field on the phone to assure you that your screen touch is recognized. 1.
unlock the phone to place outgoing calls (except to emergency and secret numbers). 1. From the Settings menu, select Phone Settings ➔ Security. You’re prompted to enter the lock code. Change Lock Code The default lock code for your phone is generally the last four digits of your phone number. It is advisable to change the default lock code to a secret code for security purposes. 1. Note: The default lock code is the last four digits of your telephone number. 2.
Emergency # Your phone provides the option of storing three emergency numbers. Each number can be up to 32 digits in length. All emergency numbers can be manually called at any time, even when your phone is locked or restricted. This can be a useful feature for controlling outgoing calls from your phone. Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even when the phone is locked or restricted.
3. Select Reset Phone. You are prompted to confirm that you 4. and Voice Dial). 4. To return to the Security sub-menu without resetting the phone, touch No. To restore default settings, touch Yes. Erase All Contacts Erase memory erases your Contacts and Group information (except Default). This feature is useful if you want to give your phone to someone else. 1.
5. • Allow Contacts — Allows only Contacts. Select the preferred setting. 6. To save your new setting, touch the OK soft key. NAM Selection The Network menu allows you to select NAM (Number Assignment Module) settings for your phone. You can store two NAM settings, which are essentially telephone numbers, for your phone. 1. From the Settings menu, select Phone Settings ➔ NAM The following roaming options appear in the display: • Home Only — Roaming is off.
2. Select the desired option. • For Set Date, the Set Date screen appears in the display. – Use the up and down arrow buttons to select the current date. – Touch the OK soft key to save your date setting. • For Set Time, the Set Time screen appears in the display. – Use the up and down arrow buttons to select the current time. – Touch the OK soft key to save your time setting. Calibration Calibration lets you adjust the screen ability to correctly locate your touch. 1. Calibration.
flash drive. (For more information, refer to “Memory Card (Optional)” on page 8.) • USB Modem — Allows you to manage files over a USB modem connection. 2. Select the desired setting, and touch the OK soft key to Phone Memory Usage Phone Memory Usage lets you review your usage of your phone’s memory. 1. Phone Memory Usage. The Phone Memory Usage screen save it and return to the Phone Settings screen. Memory Manager Memory Manager lets you quickly and easily review and manage your phone memory usage.
the display showing the following information: • Total Used memory usage • Available unused memory • Images memory usage • Videos memory usage • Ringtones memory usage • Music memory usage 2. Touch the OK soft key to return to the Memory Manager menu. Save Options • Card — Saves the selected type of files in a removable microSD memory card. 3. Select the preferred storage location for the desired file type, then touch the Save soft key. You are returned to the Memory Manager menu.
• Touch the Erase soft key. The Select to erase screen appears in the display. • Select the check box for a file you want to erase to mark the file for erasure. (Touch the Select All check box to mark all files for erasure.) • Touch the Erase soft key. 5. To move files to the Memory Card, do the following: • Images • Videos • Ringtones • Music 3. Select the desired option. A list of all files in the related • Touch the Move soft key. The Select to move screen appears in the display.
6. Press to return to the Memory Manager menu. Formatting a Memory Card Formatting a microSD Memory Card erases any data currently on the card and creates multimedia directories compatible with your phone. Caution!: Do not repeatedly format a Memory Card. This shortens its service life. To format a Memory Card, do the following: 1. From the Settings menu, select Memory Manager ➔ Card 2. Touch the Format soft key. You are prompted to confirm Memory. The Card screen appears in the display.
Section 13: Camera-Camcorder Use your Samsung phone to take full color digital pictures and videos, display them on your phone’s vivid color display, and instantly share them with family and friends. It’s fun, and as easy to use as a traditional point-and-click camera or camcorder. This section explains how you can do the following: • Take pictures and videos with your phone’s built-in digital cameracamcorder. • Send and receive pictures and videos taken with your phone’s cameracamcorder.
5. • Set as Wallpaper — to use this photo as wallpaper. To exit the Camera feature, press . Tip: You can change a number of the camera’s settings to suit particular uses for your pictures. For more information, refer to “Camera Options” on page 131 • Single — Take one photo with each press of the Camera button. • Multi — Lets you take a series of 3 or 5 photos. • Mosaic — Lets you take a mosaic of 4 or 9 photos. • Frame — Lets you select a frame to surround your photos. 3.
6. To save the picture(s) to memory, touch the Save button. To discard the pictures, touch the Erase button. You are prompted to confirm the erasure. Taking Videos To take a video using the current camcorder settings, do the following: 1. In Camera mode, touch the Mode button ( 4. Touch one of the following buttons: • Save — to save the video to memory. • Send — to send the video in a message. • Erase —to erase the video. Screen Layouts Camera Screen ).
Lets you set the Camera’s Shooting Mode to Single, Multi, Mosaic, or Frame. Lets you set the resolution of your photos between 2Megapixels – 1.3Mmegapixels. 0.8Megapisels, 0.3Megapisels, 0.1Megapixels, and Picture ID. Lets you select values for Quality, ISO, White Balance, and Effects. Lets you set Night Shot OFF or ON. Lets you set a time delay before the Camera takes a picture. Lets you set the Camera to brighten or darken your photos. Lets you access the Images folder.
Self Timer in use — Delays the camera shutter from 3 to 10 seconds after you press the Camera key ( ). Battery Level — Number black bars indicates level of charge. When the battery is low, an empty battery icon flashes and the phone sounds an alert, which indicates your phone is about to shut down. Camcorder Screen Lets you set the Camcorder’s Recording Mode to Normal or Video Msg. Lets you set the resolution of your videos between 320x240 and 176x144.
Quality — Indicates camcorder’s video quality setting. (You can change the video quality setting. For more information, refer to “Quality” on page 139.) Phone Memory — Indicates videos will be stored in the phone’s memory. Card Memory — Indicates videos will be stored on a microSD Memory Card. Memory Available — Indicates the percentage of memory available for you to store a video. Battery Level — Number black bars indicates level of charge.
• Third press — Icons and camera buttons reappear. Zoom Zoom lets you temporarily enlarge the pictures you take, unless your Size setting is 2.0m. Increasing the Zoom (2 – 9) enlarges your pictures or videos (1 is normal). Note: Zoom is not available if the Size option is set to 2.0m. 䊳 • Single — 1 picture taken when your press the Camera key ( ). • Multi — Off / 3 pictures taken in succession / 5 pictures taken in succession.
• 0.1Megapixels (320x240 pixels) • Picture ID — lets you take pictures the correct size and resolution for Contacts list picture IDs. 2. Select the desired option. You’re returned to the camera viewfinder screen. • Off • 3 seconds • 5 seconds • 10 seconds 2. Select the desired Self Timer option. If you select 3, 5, or 10, the Self Timer icon appears in the camera screen in the Note: The Size setting affects zoom capabilities. When Size is set to 2M (1600 X 1200), zoom is not available.
2. To brighten your next picture(s), touch next picture(s), touch . To darken your . (The screen image lightens or darkens to show the affects of your changes). The next time you press the Camera key ( selected Brightness setting. Camera Settings — Camera Tab When you change a setting, your change is retained until you change that setting or reset all your camera settings. In camera mode, touch ( ), then select Camera Tab ➔ ISO. The options are: • Auto • 100 • 200 • 400 2.
1. In camera mode, touch ( ), then select Camera Tab ➔ White Balance. The name of the current White Balance setting appears in the second line of the display. The options are: • Auto — The camera automatically adjusts color balance to available light. • Daylight — Use this setting when taking photos in full sun. • Cloudy — Use this setting when taking photos in cloudy conditions. • Tungsten — Use this setting when taking photos under incandescent lights.
Exposure metering 1. In camera mode, touch ( ), then select Camera Tab ➔ Exposure metering. The following options appear in the • Card Memory — Stores pictures on an optional microSD Memory Card. 2. Select the memory location setting of your choice, then touch the OK button. You’re returned to the camera display: • Normal — Adjusts exposure to the average light level over a large picture area. • Center-weighted — Adjusts exposure to the average light level over a center portion of the subject.
2. Select the Guideline setting of your choice, then touch the OK button. You’re returned to the camera viewfinder screen. View Mode View Mode lets you quickly add or remove elements of the Camcorder viewfinder screen. 䊳 Shutter Sound camcorder buttons showing, touch the center of the Choose from four different sounds whenever you take a picture. Aside from being a cool sound effect, Shutter Sounds acts as an audible reminder that your camera has taken a picture. 1.
Mode Self Timer Switches the Camcorder to Camera mode. The Camera view finder screen appears in the display. Recording Mode 1. Self Timer lets you delay taking a video long enough to let you join others in the video. 1. following options appear in the display: • Normal — Record videos that are any length up, depending on available memory. • Video Msg — Record videos that are a maximum of 15 seconds long. The videos can be included in video messages. 2. Select the desired recording mode setting.
adjustment appears in the display. 2. Select the quality setting of your choice, then touch the OK button. You’re returned to the camcorder viewfinder 2. To brighten your next video(s), touch next video(s), touch . (The screen image lightens or darkens to show the affects of your changes). The next time you press the Camera key ( ), the camcorder records a lighter or darker video according to your selected Brightness setting.
2. Select the White Balance you wish to use, then touch the OK button. The camcorder viewfinder screen appears in • Aqua — Subjects and pictures appear in an aqua hue. Select the color effect of your choice, then touch the OK the display with your selected White Balance applied. button. You’re returned to the camcorder viewfinder The next time you press the Camera key ( screen. ), the camcorder applies the selected White Balance to your When you record your next video, the phone’s display video.
in the display: • Off • On 2. Select the automatic save setting of your choice. You’re returned to the camcorder viewfinder screen. Start Sound Choose from two different sounds whenever you begin video recording. Aside from being a cool sound effect, Start Sound acts as an audible reminder that your camcorder has begun recording a video. 1. In camcorder mode, touch the Settings button, then select Common Tab ➔ Start Sound.
2. Touch and slide to browse pictures in the gallery. 3. To send the currently displayed or highlighted picture as a Picture message, touch the Send soft key. 4. To set the selected photo as wallpaper, touch the Set as 5. To change the viewing mode touch one of the following soft key. buttons: • Zoom—Zoom lets you temporarily enlarge the pictures you take, unless your Size setting is 2.0m. Increasing the Zoom (2 – 9) enlarges your pictures or videos (1 is normal).
– Move to card /phone— Allows you to move the picture from the phone to a memory card or from a memory card to the phone. – Copy to card /phone — Allows you to save a copy of the picture to the phone or to a memory card. – Rename — Allows you to rename to picture. – Lock/Unlock — Prevent/allow erasure of one or more images. Note: Locked pictures must be unlocked before you can erase them. – Print — Print one or more images on a Bluetooth-compatible printer.
Lets you select the pattern for the Stamp drawing tool. Lets you select the line thickness for art or writing using the Pen drawing tool. Lets you remove selected or all stamps from your postcard image. Lets you undo the previous line or letter made with the Pen or the previous stamp image made using the Stamp. Point, Click, and Send Pictures and Videos Take a picture or record a video and send it to anyone with a compatible device in a few easy steps. 1. 6. Touch appears in the display. 2.
6. – Via Bluetooth: Send your video via Bluetooth. Enter the recipient’s phone number or e-mail address using the keypad. 7. Touch the Done soft key to save the address(es). 8. Touch the Next soft key. Select other message fields as needed. (For more information, refer to “Creating and Sending a Picture Message” on page 60, and see “Creating and Sending a Video Message” on page 63.) 9.
Section 14: Music Player Music Player lets you play music (MP3) files stored on a microSD™ Memory Card (up to 8 GB). Music Player Controls 1. This section describes your phone’s Music Player functions and key features associated with multimedia. Launches the Music Library menu. Accessing the Music Player Note: A microSD™ Memory Card must be installed for the Music Player to launch. (For more information, refer to “Memory Card (Optional)” on page 8.) 䊳 2.
5. Elapsed Time and Total Time — Show how many hours, minutes, and seconds of the music file have been played and shows how long the music file is in hours, minutes, 6. Browsing for a Music File to Play To select a music file to play: 1. From the Music Player screen, and seconds. touch the Music Library button Playback controls ( ) in the upper left Adjusts playback volume. corner of the screen. Changes playback to previous music file in playback list.
3. 4. To play a music file, select the file. The Music Player screen 3. album you wish to find, depending upon which Library To add a file to a Playlist, touch the Add Songs soft key. The option you chose. (For more information, refer to “Entering Text” on page 52.) Add Songs screen appears in the display. • Touch a music file to add to a Playlist. A check mark appears in the check box for that file. • Touch the Save soft key. The Playlists screen appears in the display.
Creating a Playlist 1. button ( ) in the upper left corner of the screen. 4. Enter a name for your new Playlist. (For more information, following options: refer to “Entering Text” on screen appears in the display. 149 appears in the display. The Library screen appears in the display listing the • Now Playing List — Lists all music files you have selected to play. • All Tracks — Lists all music files stored in the My Music folder on a microSD Memory Card by their file names.
8. Select a music file to add to a Playlist. A check mark appears in the check box for that file. Repeat this step as needed. 9. Touch the Save soft key. The Add to Playlist screen shows a • To play the contents of your new Playlist, touch the Play button ( ) to the right of your Playlist’s name. The Music Player screen appears in the display, and the first selection in your Playlist begins playing. list of available Playlists. 10. Select your new Playlist.
Section 15: Applications A number of preloaded (or downloadable) applications are available from your Wireless Carrier for your phone. The following list names those applications that are available from the Main Menu or Widget Bar: • RealtoneVIP • RemoMail • Facebook RealtoneVIP Realtone VIP is a BREW-based subscription service that allows you to download the latest and hottest ringtones produced by Sony BMG, Universal Music Group, Warner Music Group and EMI.
Section 16: Video Player This section outlines your phone’s Video Player functions and key features. Your phone includes a Video Player capable of playing 3gs and MP4 video files. Launching the Video Player To launch the Video Player: 1. In standby mode, touch the 3. To send a video as part of a video message, touch the Send soft key. (For more information, refer to “Creating and Sending a Video Message” on page 63.) 4.
• Move to card — Lets you move a video clip to an optional Memory Card. • Copy to card — Lets you save a copy of a video clip to an optional Memory Card. • Rename — Lets you change the name of a video clip. • Lock / Unlock — Lets you protect a video from being deleted. • Video Info — Displays information about a video, such as the video Name, creation Date and Time, Resolution, data Size, and the Duration. Video Player Controls (Portrait Mode) 1. Video Library button Touch to launch the My Videos list.
Video Player Controls (Full Screen Mode) Play — Touch to begin or resume playback of the video. Next / Fast Forward — Touch to begin playing the next video in the My Videos list. Touch and hold to fast forward playback of the current video to a later point. Expand — Expands the video image to fill the Video Player screen. 1. Video Screen — Shows the video being played. 2. Progress Bar — Indicates how much of the video has Retract — Reduces the video image to its original size.
Section 17: Phone Info This section explains Phone Info options that let you identify the hardware and software versions of your phone and let you identify the phone number assigned to your phone. Phone Number This option causes the Phone Number screen to appear in the display and show the ten-digit number assigned to your phone by your Wireless Provider. 1. Wireless Provider appears in the display. To return to the Phone Info menu, press .
Section 18: Health and Safety Information This section outlines the safety precautions associated with using your phone. These safety precautions should be followed to safely use your phone. Health and Safety Information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.
contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to the FCC are: • Head: 1.22 W/Kg. • Body-worn: 1.08 W/Kg.
Consumer Information on Wireless Phones The U.S. Food and Drug Administration (FDA) has published a series of Questions and Answers for consumers relating to radio frequency (RF) exposure from wireless phones. The FDA publication includes the following information: What kinds of phones are the subject of this update? The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called "cell," "mobile," or "PCS" phones.
health hazard and to repair, replace or recall the phones so that the hazard no longer exists.
cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health. Three large epidemiology studies have been published since December 2000.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users.
was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that handsfree kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort.
wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible hearing aid at the same time. This standard was approved by the IEEE in 2000. FDA continues to monitor the use of wireless phones for possible interactions with other medical devices.
3. Position your wireless phone within easy reach. Be able to 7. may be distracting. Make people you are talking with from the road. If you get an incoming call at an aware you are driving and suspend conversations that inconvenient time, let your voice mail answer it for you. 4. Let the person you are speaking with know you are driving; have the potential to divert your attention from the road. 8. if necessary, suspend the call in heavy traffic or hazardous traffic can be hazardous.
"The wireless industry reminds you to use your phone safely when driving." For more information, please call 1-888-901-SAFE, or visit our web-site www.ctia.org. Important!: If you are using a handset other than a standard numeric keypad, please call 1-888-901-7233. Provided by the Cellular Telecommunications & Internet Association. Responsible Listening Caution!: Avoid potential hearing loss. Damage to hearing occurs when a person is exposed to loud sounds over time.
• Avoid using headphones after exposure to extremely loud noises, such as rock concerts, that might cause temporary hearing loss. Temporary hearing loss might cause unsafe volumes to sound normal. • Do not listen at any volume that causes you discomfort. If you experience ringing in your ears, hear muffled speech or experience any temporary hearing difficulty after listening to your portable audio device, discontinue use and consult your doctor.
National Institute for Occupational Safety and Health (NIOSH) 395 E Street, S.W. Suite 9200 Patriots Plaza Building Washington, DC 20201 Voice: 1-800-35-NIOSH (1-800-356-4647) 1-800-CDC-INFO (1-800-232-4636) Outside the U.S. 513-533-8328 Email: cdcinfo@cdc.gov Internet: http://www.cdc.gov 1-888-232-6348 TTY Internet: http://www.cdc.gov/niosh/topics/noise/ default.
• Should use the ear opposite the implantable medical device to minimize the potential for interference; • Should turn the phone OFF immediately if there is any reason to suspect that interference is taking place; • Should read and follow the directions from the manufacturer of your implantable medical device. If you have any questions about using your wireless phone with such a device, consult your health care provider. For more information see: http://www.fcc.gov/oet/rfsafety/rf-faqs.
relatively immune to interference noise. The hearing aid and wireless phone rating values are then added together. A sum of 5 is considered acceptable for normal use. A sum of 6 is considered for best use. M3 + M2 = 5 T3 + T2 = 5 In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level rating, the sum of the two values equal M5. This is synonymous for T ratings.
in such areas could cause an explosion or fire resulting in bodily injury or even death. networks or when certain network services and/or phone features are in use. Check with local service providers. Users are advised to switch the phone off while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.
FCC Notice and Cautions FCC Notice The phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated. Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58).
Product Performance Getting the Most Out of Your Signal Reception The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal. If you're inside a building, being near a window may give you better reception.
features are available for purchase or use in all areas. Downloadable Ring Tones may be available at an additional cost. Other conditions and restrictions may apply. See your service provider for additional information. Battery Standby and Talk Time Standby and talk times will vary depending on phone usage patterns and conditions.
lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F). • Do not place the phone in areas that may get very hot, such as on or near a cooking surface, cooking appliance, iron, or radiator. • Do not get your phone or battery wet.
• Do not paint the phone. Paint can clog the device's moving parts and prevent proper operation. • Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated. • If your phone is equipped with an external antenna, use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices.
Section 19: Warranty Information Standard Limited Warranty What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase and continuing for the following specified period of time after that date: Phone 1 Year Batteries 1 Year Leather Case 90 Days Hols
facility in an adequate container for shipping, accompanied by Purchaser's sales receipt or comparable substitute proof of sale showing the date of purchase, the serial number of Product and the sellers' name and address. To obtain assistance on where to deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.
End User License Agreement for Software IMPORTANT. READ CAREFULLY: This End User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and Samsung Electronics Co., Ltd. for software owned by Samsung Electronics Co., Ltd. and its affiliated companies and its third party suppliers and licensors that accompanies this EULA, which includes computer software and may include associated media, printed materials, "online" or electronic documentation ("Software").
5. UPGRADES. This EULA applies to updates, supplements and add-on components (if any) of the Software that Samsung may provide to you or make available to you after the date you obtain your initial copy of the Software, unless we provide other terms along with such upgrade. To use Software identified as an upgrade, you must first be licensed for the Software identified by Samsung as eligible for the upgrade.
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
shall not be governed by the UN Convention on Contracts for the International Sale of Goods, the application of which is expressly excluded. If a dispute, controversy or difference is not amicably settled, it shall be finally resolved by arbitration in Seoul, Korea in accordance with the Arbitration Rules of the Korean Commercial Arbitration Board. The award of arbitration shall be final and binding upon the parties. 14. ENTIRE AGREEMENT; SEVERABILITY.
No reproduction in whole or in part allowed without prior written approval. Specifications and availability subject to change without notice.
Index A Accessing Your Phone’s Tools 86 Airplane Mode 115 Alarm Clock 96 Set an Alarm 97 Turn Off the Alarm 97 When an Alarm Sounds 97 Apps Buying 74 Disabled 75 Expired 75 Removing 74 Restoring 75 B Battery Charging 4 Low Battery Indicator 5 Removal 6 Travel Adapter 5 Bluetooth Add New Device 91 Settings 93 Turn On/Off 90 Brew Making a Call — Voice Dialing Applications Shopping and Downloading 73 Launching 73 On-line Help 74 Settings 73 Browser Launching 76 Using Links 77 C Calculator 100 Calendar 93
Camera mode 18 Camera Options Size 132 138 Card Memory Formatting 125 Management 124 Change Text Entry Modes 55 Contacts List Calling a Contact 21 Open 38 Converters 102 Creating and Sending New Messages Picture (Pic) Message 60 Text Message 59 Video Message 63 , D Display Settings Backlight 109 Banner 109 Menu Style 107 Wallpaper 108 E Emergency Calls 20 Entering Text 52 Entering Numbers 57 185 Entering Symbols 58 Using T9 Mode 56 Erase voice memos 85 Exit Web 76 F Favorites see Speed Dial 47 File Sav
Messages and Lock Mode 68 Outbox 68 Message Send Options 65 Message Setting 71 Messaging Erasing Messages 70 Message Settings 71 microSD Formatting 125 Installing 8 Removing 8 Mode Camcorder 18 Camera 18 M-Ratings 168 Multimedia 79 Music Player 146 N NAM selection 120 Notes and tips 4 Notes, description 4 Number Entry Dialing 20 P Personal Organizer Voice Memo 84 Phone Command Keys 13 Display Screen 14 Display Screen Icons 15 Features 10 Modes 16 View, Front 12 View, Side 10 Phone Info Icon Glossary 155
Set Time 120 Settings Call Settings 113 Display 107 Phone 115 Security 116 Sound 110 Setup Location 106 Voicemail 69 Silent Mode 17 Sound Settings Alerts 112 Key Tone 112 Ringer Type 111 Speed Dial Assigning 47 Changing 48 Removing 49 Speed Dialing 22 One-Touch Dialing 22 Two-Touch Dialing 22 Standard Limited Warranty 176 Standby Mode 17 Stop Watch 101 187 T Taking pictures and videos 126 Text Conventions 4 Text Entry Mode 55 Changing 55 Text message 59 Text Modes Changing 55 Tip Calculator 105 Tip, descri
Voicemail Checking 70 Listening To 8 Setup 69 VoiceSignal Voice Memos 84 W Wallpaper 108 Warranty Information 176 WEB 76 World Time 98 188
