FRANÇAIS ESPAÑOL AQV09J Series AQV12J Series AQV18J Series AQV24J Series ENGLISH USER’S MANUAL Split - type Air Conditioner (Cooling and Heating) E S F DB98-27555A(1) ÃÀÖÞÏò_DB98-27555A_IB_E.
Register your product at www.samsung.com/global/register Safety Precautions You should take the following safety precautions when using your air conditioner. WARNING DURING OPERATION • If you don’t follow the safety precautions, you may get the risk of an electric shock, injury or death. • The manufacturer or qualified service personnel must install this air conditioner. • Unplug the electric power before repairing, installing or cleaning. D o not repair the air conditioner at your discretion.
ENGLISH Contents PREPARATION Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Name of Each Part. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote Control - Buttons and Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Name of Each Part The design and shape can be changed according to the model. Indoor Unit Air Inlet Temperature sensor Air filter (under the grille) Air flow blades (outlet) Operation indicator (GREEN) Timer indicator (GREEN) Turbo indicator (RED) On/Off button E-4 ÃÀÖÞÏò_DB98-27555A_IB_E.
ENGLISH Outdoor Unit AQV09JSeries AQV12JSeries Air Inlet (Rear) Air Outlet Connection Valve (Inside) Outdoor Unit AQV18JSeries AQV24JSeries Air Inlet (Rear) Air Outlet Connection Valve (Inside) E-5 ÃÀÖÞÏò_DB98-27555A_IB_E.
Remote Control - Buttons and Display Transmission indicator Temperature and Timer setting Battery life indicator Operation modes indicator ( AUTO, COOL, DRY, FAN, HEAT) Airflow direction Fan speed & Silence indicator 1 Hour Timer indicator On Timer indicator Off Timer indicator Turbo function indicator Sleep mode indicator Energy saving indicator Turbo button Power(On/Off) button 1 Hour Timer button Mode selection button (AUTO, COOL, DRY, FAN, HEAT) Temperature adjustment button Fan speed adjust
ENGLISH Inserting the Remote Control Batteries You must insert or replace the remote control batteries when: You purchase the air conditioner The remote control does not work correctly Note Use two AAA, LR03 1.5V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after 12 months, even if they have not actually been used. 1 Remove the battery cover in the rear of the remote control by pushing it with your thumb.
Getting Start The User’s Manual provides you valuable information about your air conditioner. Please read this manual carefully before using the air conditioner. It will help you take full advantage of the unit's features. You have already seen the basic description of the unit on pages from 4 to 6. Starting up with the next page, you will find a series of step- by-step procedures for each function available.
ENGLISH Selecting the Auto Mode You can select the Auto mode if you want to cool or heat your room automatically. You can adjust the temperature and the fan speed in this mode. 1 If necessary, press the Result: 2 Press the button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. button on the remote control until is displayed. Result: The indoor unit beeps each time you press the button.
Selecting the Cool Mode You can select the Cool mode if you want to cool your room. You can adjust the temperature and the fan speed when cooling. 1 If necessary, press the Result: 2 Press the 3 button on the remote control until is displayed. Result: The indoor unit beeps each time you press the The air conditioner runs in the Cool mode. Note You can change modes at any time. button. Press the button to adjust the temperature until the required temperature is displayed.
ENGLISH Selecting the Heat Mode You can select the Heat mode if you want to heat your room. You can adjust the temperature and the fan speed when heating. 1 If necessary, press the Result: 2 Press the 3 button on the remote control until is displayed. Result: The indoor unit beeps each time you press the The air conditioner runs in the Heat mode. Note You can change modes at any time. button. Press the button to adjust the temperature until the required temperature is displayed.
Selecting the Dry Mode You can select the Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 If necessary, press the Result: 2 Press the button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. button on the remote control until is displayed. Result: The indoor unit beeps each time you press the The air conditioner runs in the Dry mode.
ENGLISH Selecting the Fan Mode You can select the Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 If necessary, press the Result: 2 3 Press the button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. button on the remote control until is displayed.
Selecting the Turbo Function You can select the Turbo Function if you want to cool or heat your room in the fastest way. After the 30 - minute operation with the maximum setting, it returns to the previous setting. 1 2 If necessary, press the button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. Press the button. Result: The temperature and fan settings are adjusted automatically.
ENGLISH Selecting the Energy Saving Function You can select the Energy Saving Function to save energy when cooling or heating. 1 If necessary, press the Result: 2 3 4 button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. Press the button. Result: Note You can select the Energy saving mode only in the Cool and Heat mode. The indoor unit beeps.
Adjusting the Airflow Direction Vertically You can adjust the airflow direction vertically. The outer airflow blade moves up and down to increase the efficiency of the cooling or heating operation. 1 Press the button until the required direction is set. Result: The outer blade is adjusted vertically. 2 Press the operation. button to move the blade up and down automatically during 3 Press the button again to stop the blade moving up and down. Note If you turn the air conditioner...
ENGLISH Setting the 1 Hour Timer You can set the 1 Hour Timer to turn off the air conditioner automatically after an hour. It is the quick and convenient way using only one button. 1 Press the Result: 2 button until the indicator appears on the remote control. The operation indicator on the indoor unit lights up. The air conditioner turns off after an hour automatically. Press the button until the desired mode is displayed at the remote control to select the mode after setting the 1 Hour Timer.
Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time. You can set the time from 1 hour to 24 hours. 1 Press the button until the required time is displayed to set the On Timer. You can set the time between 1 hour and 24 hours. 2 Press the button to complete the setting. Result: The remaining time is displayed. The timer indicator stops blinking. The selected mode and the temperature on the display disappear after 10 seconds.
ENGLISH Setting the Off Timer You can set the Off Timer to turn off the air conditioner automatically at the appointed time. You can set the time from 1 hour to 24 hours. 1 2 Press the button until the required time is displayed to set the Off Timer. You can set the time between 1 hour and 24 hours. Press the Result: button to complete the setting. The remaining time is displayed. The timer indicator stops blinking.
Selecting Good Sleep Mode Good Sleep mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness. The Good Sleep mode can be selected only when the air conditioner is switched on in cool/heat mode. 1 If necessary, press the Result: 2 Press the Result: button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. button to select or mode.
ENGLISH In cool mode Good Sleep mode keeps the skin temperature at the best during the 3 stages such as, Falling Asleep Stage Sound Sleep Stage Wake Up Stage in order. Falling Asleep Stage : This stage supports the environment to quickly cool down. Together with comfortable intermittent air, you will be able to fall asleep quickly. Sound Sleep Stage : This stage helps users to take deep sleep and keep the healthy skin by controlling wavy temperature control and insensible air stream.
Operating Recommendations Here are a few recommendations that you should follow when using your air conditioner. Topic Recommendation Heating performances The heat pump function of the air conditioner absorbs heat from outside air and brings it indoors. As the temperature of the outside air drops, the heating performance of air conditioner will decrease. If you find that the room is not warm enough, using an additional heating appliance is recommended.
ENGLISH Temperature and Humidity Ranges If you check the following tables, you can use your air conditioner more efficiently. If the air conditioner is used at... Then... Heating capacity The air conditioner may stop operating for the reason of protection. Low temperatures Water may leak and some malfunction may occur if the heat exchanger freezes.
Troubleshooting Guide Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem Explanation/Solution The air conditioner does not operate at all. Check if power is on and operate the air conditioner again. Check if the circuit breaker is switched off. Check if Off Timer is set. The temperature is not adjusted. Check if you selected the Fan mode. The air conditioner does not operate in the HEAT mode.
ENGLISH Cleaning Your Air Conditioner To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter. Before cleaning your air conditioner, ensure that you IMPORTANT have switched off the breaker used for the unit. 1 Open the upper front grille by pulling the lower right and left tabs of the grille. 2 Pull air filters out of each tab of the grille. 3 Remove all dust on the air filters with a vacuum cleaner or brush.
If you have any comments or questions regarding Samsung products, contact the SAMSUNG customer care center. Samsung Electronics America, Inc. 1-800-SAMSUNG (7267864) www.samsung.com ÃÀÖÞÏò_DB98-27555A_IB_E.
