BN68-00515V-00.qxd 1/11/05 4:10 PM Page 1 List of Parts Accessories Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
BN68-00515V-00.qxd 1/11/05 4:10 PM Page 2 Installing the stand 1 1 2 2 Lower the TV set in the direction of the arrow and fix the stand. Use the four screws to tightly fix the stand. Connecting Antenna/Cable TV 1 Plug the antenna/cable TV lead into the ANT IN terminal on the back of the TV. When connecting the RF cable to the antenna input terminal, keep the copper wire portion of the RF cable straight to avoid bending it.
BN68-00515V-00.qxd 1/11/05 4:10 PM Page 3 Connecting a VCR TV Rear Panel VCR Rear Panel 4 3 2 1 1 2 3 4 Audio Cable (Option) Video Cable (Option) RF Cable Connect the cable TV or antenna to the ANT IN terminal on the back of the VCR. Connect an RF cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV. Connect a video cable between the VIDEO OUT jack on the VCR and the AV IN [VIDEO] jack on the TV.
BN68-00515V-00.qxd 1/11/05 4:10 PM Page 4 Connecting a DVD Player TV Rear Panel DVD Player Rear Panel 2 1 1 2 Audio Cable (Option) Component Cable (Option) Connect a component cable between the COMPONENT IN 1 or COMPONENT IN 2 [PR, PB, Y] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD player. Connect an audio cable between the COMPONENT IN 1 or COMPONENT IN 2 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD player.
BN68-00515V-00.qxd 1/11/05 4:10 PM Page 5 Connecting a DVD / Set-top box via DVI DVD Player Rear Panel 1 2 TV Rear Panel 2 Audio Cable (Option) 1 DVI-to-HDMI Cable (Option) Connect a DVI-to-HDMI cable or DVI-HDMI Adapter between the HDMI/DVI connector on the TV and the DVI connector on the DVD player/Set-top box. Connect an audio cable between the DVI IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD player/Set-top box.
BN68-00515V-00.qxd 1/11/05 4:10 PM Page 6 Plug & Play When the TV is initially powered on, several basic customer settings proceed automatically and subsequently. 1 Press the POWER button 5 Press the ENTER button on the remote control. to select “Start”. The message “Start Plug & Play” is displayed with “OK” selected. The TV will begin memorizing all of the available channels. 2 Select the appropriate language by pressing the UP/DOWN buttons. button Press the ENTER to confirm your choice.
BN68-00515V-00.qxd 1/11/05 4:10 PM Page 7 Remote control Functions Chart POWER PIP Turns the TV on and off. Picture-in-Picture ON/OFF. STILL SLEEP Press to stop the action during a particular scene. Press again to resume normal video. Press to select a time for the TV to turn off automatically. NUMBER BUTTONS Tunes to the previous channel. Press to change the channel. CH and CH (Channel UP/Down) +100 PRE-CH Press to select channels over 100.
BN68-00515V-00.qxd 1/11/05 4:10 PM Page 8 FAQ Check the following items before calling a Samsung authorized service center. Image is not centered on the screen. Adjust the horizontal and vertical position. The screen position must be adjusted on the output source (i.e. STB) with a digital signal. Poor picture Try another channel. Adjust the antenna. Check all wire connections. If a still image is displayed for an extended period of time, residual images or blurring may appear.
