Q70/Q71 User Guide
Chapter 1.
Product Features High Performance Notebook Computer ■ Intel Core™2 Duo Processor*. DDR II Memory ■ Wireless LAN*, Bluetooth* Easy-to-Use AV ■ Play AVStation and AVStation Now* are provided to easily play various multimedia files. Sophisticated Design for Increased Usability ■ AV and various shortcut keys on the keyboard ■ Multi card slot* ■ Luxurious design with increased usability * The items marked with this symbol are optional items that are Note supported depending on the computer model.
Before You Start Before reading the User Guide, first check the following information. User Guide Information Utilizing the User Guide This product is supplied with an Installation Guide, and a User Guide. You can even more easily and conveniently use the computer by using any of the guides depending on your needs. Be sure to read the Safety Precautions before using the computer. Refer to the separately supplied Installation Guide when installing your computer.
Safety Precaution Notations Icon Notation Description Warning Failing to follow instructions marked with this symbol, may cause personal injury and or fatality. Caution Failing to follow instructions marked with this symbol, may cause slight injury to yourself or damage your property. Copyright © 2007 Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. owns the copyright of this manual.
Contents Chapter 1. Getting Started Product Features Before You Start Contents Safety Precautions Proper Posture During Computer Use Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE SYMBOL INFORMATION Overview Front View Status Indicators Right View Left View Back View Bottom View Turning the Computer On and Off Turning the computer on Turning the computer off 2 3 5 6 15 18 20 22 32 33 33 34 35 36 37 38 39 39 39 Chapter 2.
Safety Precautions For your security and to prevent damage, please read the following safety instructions carefully. Since this is commonly applied to Samsung Computers, some figures may differ from actual ones. Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality. Installation Related Power Related The power plug and wall outlet figures may differ depending on the country specifications and the product model.
If the power cord or power outlet makes a noise, disconnect the power cord from the wall outlet and contact a service center. There is a danger of electric shock or fire hazard. Plug the power cord firmly into the power outlet and AC adapter. Failing to do so may cause fire hazard. Do not bend the power cord excessively or do not place a heavy object over the power cord. It is especially important to keep the power cord out of reach of infants and pets.
Battery Usage Related If water or another substance enters the power input jack, AC adapter or the computer, disconnect the power cord and contact the service center. Damage to the device within the computer may cause electric shock or fire hazard. Usage Related Keep the battery out of the reach of infants and pets, as they could put the battery into their mouths. Disconnect all cables connected to the computer before cleaning it. If you are using a notebook computer, remove the battery.
Upgrade Related Do not place any container filled with water or chemicals over or near the computer. If water or chemicals enter the computer, this may cause fire or electric shock. If the computer is broken or dropped, disconnect the power cord and contact a service center for a safety check. Using a broken computer may cause electric shock or fire hazard. Avoid direct sunlight when the computer is in an airtight location such as inside a vehicle. There is a danger of a fire hazard.
Shut down the computer and disconnect all cables before disassembling the computer. If there is a modem, disconnect the phone line. If you are using a notebook computer, make sure to remove the battery. Failing to do so, may cause electric shock. Custody and Movement Related Follow the instructions for the relevant location (e.g. airplane, hospital, etc.) when using a wireless communication device (wireless LAN, Bluetooth, etc.).
Caution Failing to follow instructions marked with this symbol may cause slight injury or damage to the product. Installation Related Battery Usage Related Do not block the ports (holes), vents, etc. of the product and do not insert objects. Dispose of worn-out batteries properly. Damage to a component within the computer may cause electric shock or fire. When using the computer with it lying on its side, place it so that the vents face upwards.
Usage Related Do not place a candle, lighted cigar, etc. over or on the product. There is a danger of fire. Make sure to have the product tested by a safety service engineer after repairing the product. Authorised Samsung Repair Centers will carry out safety checks after a repair. Using a repaired product without testing it for safety might cause electric shock or fire. Close the LCD panel only after checking if the notebook computer is turned off. Failing to do so, may cause damage to the product.
Upgrade Related Failing to do so may cause electric shock or fire. Emergency disk eject method using paperclip should not be used while the disk is in mothion. Make sure to use the emergency disk eject method only when the Optical Disk Drive is stopped. There is a danger of injury. Do not place your face close to the Optical Disk Drive tray when it is operating. There is a danger of injury due to an abrupt ejection. Check CDs for cracks and damage prior to use.
Custody and Movement Related Cautions on Preventing Data Loss (Hard Disk Management) When moving the product, turn the power off and separate all connected cables first. Take care not to damage the data on a hard disk drive. The product might be damaged or users may trip over the cables. For long periods of not using the notebook computer, discharge the battery and preserve as it is detached. The battery will be preserved at its best condition.
Proper Posture During Computer Use Maintaining a proper posture during computer use is very important to prevent physical harm. The following instructions are about maintaining a proper posture during computer use developed through human engineering. Please read and follow them carefully when using the computer. Otherwise, the probability of (RSI: Repetitive Strain Injury) from repeated operations may increase and serious physical harm may be caused.
Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least 50cm. Keep your arm at a right angle as shown by the figure. m 50c ■ Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. ■ Keep the line from your elbow to your hand straight. ■ Avoid setting the monitor and LCD excessively bright. ■ Do not hold the mouse with excessive force. ■ Keep the monitor and LCD screen clean.
Volume Control (Headphones and Speakers) Illumination ■ Do not use the computer in dark locations. The illumination level for computer use must be as bright so for reading a book. Check your volume first to listen to music. ■ Indirect illumination is recommended. Use a curtain to prevent reflection on the LCD screen. Operation Condition Check your volume!! ■ Do not use the computer in hot and humid locations.
Important Safety Information Safety instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Caution ■ Openings in the computer case are provided for ventilation. Do not block or cover these openings.
Care During Use The Instruction On Safety Operation of computer ■ Do not walk on the power cord or allow anything to rest on it. 1 ■ Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. 2 ■ Some products have a replaceable CMOS battery on the system board. There is a danger of explosion if the CMOS battery is replaced incorrectly. Replace the battery with the same or equivalent type recommended by the manufacturer.
Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Caution Note Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas.
General Requirements Connect and Disconnect the AC adapter The requirements listed below are applicable to all countries: The socket-outlet shall be installed near the equipment and shall be easily accessible. ■ The length of the power cord set must be at least 6.00 feet (1.8m) and a maximum of 9.75 feet (3.0m). Do not unplug the power cord out by pulling the cable only.
Regulatory Compliance Statements Wireless Guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections).
■ Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. 802.11B (also known as wireless Ethernet or Wifi) and Bluetooth communication devices are examples of devices that provide wireless communication.
United States of America USA and Canada Safety Requirements and Notices Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network. Do not touch or move antenna while the unit is transmitting or receiving.
Caution Intentional emitter per FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference will not occur in a particular installation.
The REN is used to determine the quantity of devices which may be connected to telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by total RENs, contact the local telephone company to determine the maximum REN for the calling area. Wireless devices are not user serviceable.
Canada Unintentional Emitter per ICES-003 This equipment cannot be used on public coin phone service provided by the telephone company. Connection to party line service is subject to state tariffs. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada.
This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter. connection. In some cases, the inside wiring associated with a single-line individual service may be extended by means of a certified connector assembly. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
European Union European Union CE Marking and Compliance Notices European Radio Approval Information (for products fitted with EU-approved radio devices) Products intended for sale within the European Union are marked with the Conformité Européene (CE) Marking, which indicates compliance with the applicable Directives and European standards and amendments identified below. This equipment also carries the Class 2 identifier. The following information is only applicable to systems labeled with the CE mark .
Translated Statements of Compliance [Spanish] Este producto cumple con las normas del Directivo Europeo 1999/5/EC. [Swedish] Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC. [English] This product follows the provisions of the European Directive 1999/5/EC. [Danish] Dette produkt er i overensstemmelse med det europæiske direktiv 1999/5/EC [Dutch] Dit product is in navolging van de bepalingen van Europees Directief 1999/5/EC.
European Telecommunication Information (for products fitted with EU-approved modems) General European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz. Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999/5/EC.
WEEE SYMBOL INFORMATION Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
Overview Before You Start! ■ *The items marked with this symbol are optional items which may be changed or may not be provided depending on the computer model. ■ The actual color and appearance of the computer may differ from the pictures used in this guide. Front View 1 LCD 2 Keyboard The screen images are displayed here. 10 Power Button Turns the computer on and off. p. 39 A device to enter data by pressing the keys. p.
Status Indicators 1 Num Lock 2 Caps Lock 3 This turns on when the Num Lock key is pressed and numeric keypad is activated. p. 42 This turns on when the Caps Lock key is pressed allowing capital letters to be typed without holding the Shift button down. Power This shows the computer operating status. On : When the computer is operating Blinks: When the computer is in Sleep mode. 4 Charge Status This shows the power source and the battery charge status.
Right View 1 Fan Vents The internal heat of the computer is emitted through these holes. Caution If the vents are blocked the computer may overheat. Avoid blocking the vents as this may be dangerous. 2 3 USB Port You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. Monitor Port A port used to connect a monitor, TV or projector supporting a 15pin D-SUB interface. p.
Left View 3 2 1 Wired LAN Port PC Card Slot Install the PC card into this slot. CD Drive(ODD)* Plays CD or DVD titles. Since an ODD drive is optional, the installed drive depends on the computer model. p. 47 Connect the Ethernet cable to this port. p. 89 4 36 IEEE 1394 Port A port used to connect IEEE 1394 devices such as a digital camcorder.
Back View 1 DC Jack A jack to connect the AC adapter that supplies power to the computer. 4 2 Security Lock Port You can connect a Kensington lock to the Security Lock Port to prevent the computer from being stolen. 3 Battery This is a Lithium-Ion rechargeable battery that supplies power to the computer. p. 137 37 USB Port You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc.
Bottom View 1 2 Hard Disk Drive Compartment Cover The hard disk drive is installed inside the cover. 3 Battery Latches The latch used to remove or install the battery. Memory Compartment Cover The main memory is installed inside the cover. You will be charged to replace the hard disk at service centers. Caution 38 p. 134 p.
Turning the Computer On and Off Turning the computer on 1 2 3 Turning the computer off 1 Install the battery and connect the AC adapter. (Refer to the Installation Guide.). 2 Lift the LCD panel up. Click the Start ( ) button on the taskbar. Click the ( ) and click on Shut down. The computer will shut down. Press the Power button to turn the computer on.
Chapter 2.
Keyboard The keyboard is supplied according to the corresponding country. Refer to the keyboard figure for the corresponding country.
Shortcut Keys You can use the following functions by pressing the keys below with the Fn key. Fn+ Name REST (Sleep Mode) Gauge Euro CRT/LCD Backlit Mute Function Switches to Sleep mode. To wake the computer up, press the Power button. Shows the remaining battery charge. You can only use this function when the Easy Display Manager program is installed. Enters the Euro monetary unit symbol. This key may not be provided depending on the keyboard type.
Screen Brightness Control Other Function Keys To adjust the LCD brightness press the Fn + ( ) key combination or the Fn + ( ) key combination. The changed screen brightness is displayed at the center of the screen for a moment. ■ Application Key ( ) Performs the right-click mouse function (touchpad). Volume Control To control the volume, press the Fn + ( ) key combination or the Fn + ( ) key combination. You can mute the sound or cancel the mute function by clicking the Fn + ( ) key combination.
Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse. Before You Start! ■ Use the Touchpad with your fingers. Using a sharp object may damage the Touchpad. ■ If you touch the Touchpad or press the Touchpad buttons while booting up, the Windows boot time may be extended. Touchpad Use to move the cursor. Scroll Area Touchpad Left Button Touchpad Right Button Plays the role of the mouse wheel.
Moving the cursor on the screen Double-Click Function Place your finger on the touchpad slightly and move your finger. The mouse cursor will move accordingly. Move your finger in the direction you wish to move the cursor. Put your finger on the touchpad and quickly tap twice with your finger on an item you want. Alternatively, press the left touchpad button twice quickly.
Drag Function Touchpad On/Off Function Dragging refers to moving an item to another place after selecting it. If you want to use the mouse only without using the touchpad, you can turn the touchpad off. To lock the touchpad function, press the Fn + ( ) keys. Press and hold down the left touchpad button over an item you want to drag and move the item to the new location.
CD Drive An optical disk drive is optional and may differ depending on your computer model. For detailed specifications, refer to the catalog. Before You Start! One of the following optical disk drives is installed on this computer. Drive Type Function RW-Combo You can read CDs and DVDs, and burn a CD. DVD Super Multi You can read CDs and DVDs, and burn CDs and DVDs. Supported DVD recording types include DVD±R, DVD±RW, DVD-RAM.
2 When the CD tray pops out, insert a CD or DVD until it clicks. Burning a CD If your computer has a writable CD drive, you can write data onto a CD or DVD or burn an audio CD. CyberLink DVD Suite is supplied with the System Software Media (or an additional CD) so that you can burn a CD using the program. Install the provided software and use the software functions referring to the software help. 3 Push the CD tray inward until it clicks. The CD drive status indicator is turned on.
HD DVD HD-DVD is a next generation storage media that can save more data then the existing DVD format. You can record and play better quality HD movies than the existing SD-grade DVD format. Type HD DVD DVD CD Storage Capacity 15 GB / 30 GB 4.7 GB / 8.5 GB 0.65 GB Data Rate 36.55 Mbps 11.08 Mbps 7.8 Mbps Supported Resolution 1920 X 1080(i) 720 X 480 320 X 240 Logo * Date Rate: The amount of data that can be read or written onto a storage media per second.
About HD DVD The CyberLink HD DVD Solution program is provided so that users can conveniently and easily record multimedia files and other data onto HD DVD disks. Note 1 For a more detailed description of the functions, refer to the help section of the corresponding program. Select Start > All Programs > CyberLink HD DVD Solution > CyberLink HD DVD Solution. Alternatively, double-click the CyberLink HD DVD Solution ( 2 Favorites You can save functions for frequently used menus.
Blu-Ray Blu-Ray is a next generation storage media that can save approximately 5 to 10 times more data then the existing DVD format. You can record and play better quality HD movies than the existing SD-grade DVD format. Type Blu-Ray DVD CD Storage Capacity 25 GB / 50 GB 4.7 GB / 8.5 GB 0.65 GB Data Rate 36 Mbps 11.08 Mbps 7.8 Mbps Supported Resolution 1920 X 1080(i) 720 X 480 320 X 240 Logo * Date Rate: The amount of data that can be read or written onto a storage media per second.
About Blu-Ray The CyberLink BD Solution (hereafter CBDS) program is provided so that users can conveniently and easily record multimedia files and other data onto Blu-Ray disks. Note 1 2 For a more detailed description of the functions, refer to the help section of the corresponding program. Favorites You can save functions for frequently used menus. Movie Player You can play DVD video files. Data You can format or write data onto CD/DVD Blu-Ray disks.
Multi Card Slot Using the multi card slot, you can read and write data to a Memory Stick, Memory Stick Pro, SD card, MMC and xD card. You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera, digital camcorder, MP3, etc. Before You Start! ■ A multi card slot is optional and is provided for some models only. ■ You have to additionally purchase a multi card with the necessary capacity depending on your requirements.
3 To Insert and Use a Memory Card 1 Insert a card into the slot according to the directions printed on the slot. You can save, move and delete data by doubleclicking the corresponding drive. Example) SD Card 2 Since you can only use the card after formatting it, if it is not formatted, format the card referring to the descriptions of “Formatting a card”. p. 55 The card drive appears. Click Open folder and view files. If the window does not appear, click Start > Computer.
To remove a memory card 1 2 Push the tip of the card lightly. Caution If the card pops up with a clicking sound, remove the card. To format a memory card You have to format a card first to use it. Caution 1 2 3 Formatting a card deletes all data saved on the card. If the card includes data, backup the data before formatting it. Click Start > Computer. Right-click over a card drive with the touchpad and select Format. Click Start to the formatting.
PC Card Slot You can insert and use various PC cards using the PC card slot. This computer provides one PC card slot supporting the 16/32 bit type. Before You Start! ■ Remove the dummy card installed to protect the PC card slot first. Lightly push the Eject button of the PC card slot. The Eject button pops up. Press the Eject button fully to eject the dummy card. ■ The PC card slot does not support the ZV and PC card III types.
Connecting a Monitor Using an external display device is useful when you are giving a presentation or watching a video or movie through your monitor. Before You Start! You have to buy a connection cable additionally. Connecting a Monitor Viewing Through a Monitor Pull the cover forwards holding the groove at the side to open it and connect the monitor to the monitor port. You can switch the display device using the shortcut key.
Adjusting the Volume You can adjust the volume using the keyboard and the volume control program. Adjusting the Volume using the Keyboard Using the Sound Recorder Press the Fn + ( ) key combination or Fn + ( combination to adjust the volume. The procedures to record sound using the Windows Recorder are described below. Press the Fn + ( on or off.
Using SRS The SRS function enables you to experience more stereophonic sound using stereo speakers. 1 2 3 Right-click over the Volume icon ( and select Play Device (P). ) in the Taskbar Select Speaker in the Play tab and click Properties. Select the SRS tab in the Speaker Properties window. Select a mode and tick the Use checkbox on the left. Click OK. You will be able to experience a more stereophonic sound in the selected mode. ■ WOW HD (Music): Select to listen to music.
Using Digital Output (S/PDIF) You can enjoy 5.1 channel surround sound by using the Headphone/S/PDIF jack. Before You Start! To listen to 5.1 channel surround sound, follow the procedures below. ■ Connect to a 5.1 channel speaker system using the Headphone/S/PDIF jack. ■ Select Digital Output (S/PDIF) in the DVD player program and play a DVD title. What is Digital Output (S/PDIF)? S/PDIF is a method to output digital sound and is also called Digital Output. If you connect a 5.
Connecting 5.1 Channel Speakers 1 Connect the S/PDIF cable to the S/PDIF jack and connect the other end of the cable to the 5.1 channel speaker system. 5.1 Channel Speakers Decoder S/PDIF Cable ■ Since the procedures to connect a 5.1 channel speaker system may differ depending on the system model, refer to the relevant product manual. A 5.1 channel speaker system consists of 6 speakers, an amplifier, and a decoder.
Selecting Digital Output in the DVD Player Program. Since the sound setting is set to Digital Output by default, you do not additionally need to configure it for digital output. You can confirm your settings as follows. 1 2 3 4 If the CyberLink PowerDVD program is not installed, install the program using the system software media (or additional CD depending on the computer model). Launch CyberLink PowerDVD and click Configure. Change the Speaker Environment value to Use S/PDIF in the Audio tab.
Chapter 3. Using Microsoft Windows Vista About Microsoft Windows Vista 64 Welcome Center 64 Help and Support 65 Windows Vista Screen Layout 66 Desktop 66 Start Menu 68 Sidebar / Gadget 70 Window 73 Control Panel 76 Opening the Control Panel 76 User Accounts 78 Phishing Filter 83 User control function 85 Windows Mobile Center 87 The screen shots used in this chapter may differ from actual screens depending on the Windows Vista version and model.
About Microsoft Windows Vista Microsoft Windows Vista (hereafter Windows) is a computer operating system. Since you have to learn how to use it in order to use the computer efficiently and effectively, use the Welcome Center and Windows Help and Support to learn about Windows Vista. The screen layout may differ depending on the computer model and the operating system. Note Welcome Center In the Welcome Center, you can view brief descriptions of Windows Vista functions and run the functions directly.
Help and Support Windows Help and Support provides information on Windows basic functions and usages. Click Start > Help and Support. You can find help for frequently used basic functions using Find an Answer and you can search for help by entering a keyword in the Search box. Help Search Find an Answer Windows Basics Introduces the basic usage of the computer and the Windows operation system. You can learn tasks and tools necessary to use the computer.
Windows Vista Screen Layout Desktop If you turn the computer on, the Desktop screen appears. The desktop is the working area on the computer. It consists of a large workspace and a taskbar at the bottom as shown in the figure below. The screen layout may differ depending on the computer model and the operation system version.
1 2 3 4 5 6 7 8 Recycle Bin You can drop useless files and folders here. Shortcut Icons You can launch programs by clicking the shortcut icons on the Desktop. Start Menu The menu from which you can launch programs. Start Button Press the start button. The Start menu appears. Taskbar Currently running programs are displayed here. System Tray with Clock Shows some running program icons. Icons not being used are hidden. If you click the arrow mark on the left, you can view hidden icons.
Start Menu The menu from which you can launch programs. Click Start ( ). The Start menu appears. Alternatively, press the Windows key ( ) on the keyboard. Fixed Programs Username The program or search result is displayed. Search Computer Control Panel Help and Support All Programs Power Menu Button You can search for files, folders, etc.
Search Enables users to search for files and folders. Computer Shows storage devices such as hard disk drives, CD/DVD drives, network drives, etc. In addition, you can manage files and folders here. Control Panel Enables users to configure the appearance and settings of Windows such as the Desktop, window colors, hardware and software settings, security, etc. Help and Support Provides on-line help about functions and usage of Windows and troubleshooting.
Sidebar / Gadget Sidebar is a vertical bar that appears at the side of the Desktop. A mini program called Gadget runs over the Sidebar which shows information such as stocks, schedule, weather, etc. and provides frequently used tools. You can download various Gadgets from the Internet other than the default Gadget. Sidebar / Gadget Structure If you launch Windows, the Sidebar is automatically launched and the Sidebar and Gadget appear at the side of the Desktop.
Adding a Gadget You can find a gadget in the Gadget Gallery and add it to the Sidebar. 1 2 If you click the + at the top of the Sidebar, the Gadget Gallery opens. If you double-click on a gadget, the gadget is added to the Sidebar. Note ■ You can move a gadget to another location by dragging it with the mouse. Not only can you move a gadget onto the Sidebar but also out of the Sidebar. ■ If you place the mouse pointer over a gadget, the close and option buttons appear.
Exiting the Sidebar Right-click on the Sidebar icon ( Exit to exit the Sidebar. ) in the System Tray with the clock on the taskbar and select Closing the Sidebar Note ■ Even if you close the Sidebar, the Sidebar continues running in the System Tray in the clock area, though it is not displayed on the Desktop. ■ To close the Sidebar, right-click over the Sidebar on the Desktop and select Close Sidebar.
Window A window is the basic frame for a computer operation. As an example, let’s see the layout of a Pictures Window. Click Start > Pictures. The items and names may differ depending on your computer model and the Windows Vista version.
1 Address Display Line Shows the location of the currently selected folder or file. 2 Move Button You can move to the previous or next page by clicking the Back or Next buttons. Opens the previously opened page. Opens the next page, when you have returned to a previous page. 3 Menu Bar Provides menus to run functions for the selected folder or file, etc. 4 Toolbar Provides icons to quickly run frequently used functions.
Window View Functions ► Switching between Windows This function arranges multiple windows in 3D so that users can easily view the windows. If you have set up the Aero function, you can use the window view functions. Note If you want to use the Aero function, click Start > Control Panel > Appearance and Personalization > Window Color and Appearance. Select Window Aero from the color schemes and click OK.
Control Panel Tools for configuring Windows are located in the Control Panel. Opening the Control Panel Click Start > Control Panel. System and Maintenance Using this function, you can configure Windows performance options. Security Using this function, you can check the current security status to protect the computer and configure the security settings for the firewall, spyware, etc. Network and Internet Using this function, you can check the network status and configure the settings.
User Accounts and Family Safety You can change the user account settings, passwords and configure the Parental Controls function. Appearance and Personalize Using this function, you can configure the Desktop style, theme or screen saver settings. Clock, Language, and Region Using this function, you can configure the date, time, language and regional settings. Ease of Access Using this function, you can select options for hearing and sight impaired persons as well as for challenged persons.
User Accounts Using Windows Vista User Accounts, more than one user can easily share the same PC. The procedures to add and delete a user account and to switch users are described below. 5 Adding User Accounts 1 2 3 4 Click Start > Control Panel> User Accounts and Family Safety. Click User Accounts > Manage another account. Click Create a new account. Enter a new username and select either Standard User or Administrator. 78 Click Create a new account to add a new account.
Removing User Accounts Note 1 2 3 4 5 ■ If there is only one administrator account for the computer, you cannot delete the administrator account. ■ You can only delete another account when you are logged in as an administrator. If you click Delete files, the account and all files belonging to the account are deleted. If you click Keep files, only the account is deleted and the files belonging to the user are saved on the Desktop.
Changing the screen resolution and the color The resolution refers to the number of pixels displayed on the screen. When increasing the resolution, the items on the Desktop become smaller and more items can be displayed on the screen. The higher the color quality, the more colors are displayed on the screen. 1 2 Click Start > Control Panel > Appearance and Personalization > Personalization > Display Settings.
3 Configuring the Start Menu Power Button The Power button on the Start menu ( ) performs various operations depending on the settings. 1 Click on Change Advanced Power Settings and open Start Menu Power Button in the Power Buttons and Lid item. Click Start > Control Panel > Hardware and Sound > Power Options and then Change Battery Settings. 1 2 2 Click on Change Plan Settings in the currently selected power setting.
4 Select a power plan and click the OK button. Type Power Button Image after Setting Change Description Sets the computer to enter Sleep mode. The screen and hard disk will be turned off to reduce the power consumption of the overall system. If you press the Power button on the computer, Sleep mode is deactivated and you can start working immediately. Sleep Sets the computer to hibernate. All work is automatically saved, the screen is turned off and the computer makes no noise.
Phishing Filter Phishing is a method used by hackers to illegally collect personal information such as credit card numbers, passwords, other account numbers, etc. through emails or websites. The Phishing Filter protects users from these phishing attempts. If the current page is judged to be a suspicious website, the Phishing Filter displays a warning message with an alarm when the Phishing Filter is enabled.
3 4 The Internet Options window opens. Locate the Phishing Filter item in the Settings field. Select Turn on automatic website checking and click the OK button to use the Phishing Filter. To not use the Phishing Filter, select Turn off automatic website checking in the Settings field in Step 3 above.
User control function Using this function, you can control the content your children can access. You can determine for how long they can use the computer and the content they can access. When you have finished the settings, click OK to finish. Configuring Parental Controls 1 Click Start > Control Panel > User Accounts and Family Safety > Parental Controls. 2 Select a user to configure the Parental Controls for. The User Controls window for that user opens.
3 Using Activity Report You can view and evaluate your children’s internet access through the Activity Report. 1 2 4 Open the User Controls window referring to the descriptions of Parental Controls. Set Activity Reporting to On. 86 To view the Activity Report, click on View Activity Report on the right of the User Controls window. If you click the View Activity Report, the following window opens displaying a computer operating summary.
Windows Mobile Center Using Windows Mobile Center, you can easily configure computer settings such as the volume, the wireless network connection settings, the display settings, etc. all at the same time. Some functions may not be supported depending on the Windows Vista version. Note 1 Click Start > All Programs > Accessories > Windows Mobile Center. Alternatively, click Start > Control Panel > Mobile PC > Windows Mobile Center.
Chapter 4.
Wired Network A wired network is a network environment used for a company network or broadband internet connection at home. Before You Start! You can also configure the network settings using the Easy Network Manager. 1 2 3 4 Connect a LAN cable to the computer’s LAN port. Click Start > Control Panel > Network and Internet > Network and Sharing Center. Click Manage Network Connections from the left pane. 89 p. 94 Right-click over the Local Area Connection and select Properties.
5 6 Select Internet Protocol Version 4 (TCP/IPv4) from the Networking tab and click Properties. Note ■ The LAN device driver may differ depending on your LAN device model. ■ To add a network component, click Install in the screen shown in the figure above. You can add clients, services, and protocols. Configure the IP settings. When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually.
Using both DHCP and a fixed IP simultaneously 4 Select the Alternate Configuration tab, select User configured and fill in the corresponding fields. 5 When you have completed the settings, click the OK button. Using the Alternate Configuration providing by Windows Vista, you can set both automatic and fixed IP addresses and then you can select to use either of them to connect to the Internet.
Wireless Network A wireless network (Wireless LAN) environment is a network environment that enables communicating between multiple computers at home or a small-size office through wireless LAN devices. Before You Start! ■ The descriptions below are for computer models with a Wireless LAN card or device. You can also configure the wireless network settings using the Easy Network Manager. p. 94 A Wireless LAN device is optional.
Connecting to a Wireless LAN If there is an AP, you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows Vista. 1 2 Note Right-click over the Network Connections ( ) icon on the taskbar and click Connect to the Network. 3 Ask your network administrator for the network key, if necessary. When Connected to the AP is displayed, click the Close button. You can access the network. Select an AP to connect to and click Connect.
Using the Easy Network Manager Easy Network Manager is a program that helps configure the network settings. Easy Network Manager provides the following features. You can easily configure the network and printer settings. p. 94~95 You can immediately use the network without having to define new network settings again after moving to another location. p. 96 By configuring the network settings (IP address, printer settings, etc.
5 7 Select Internet Direct Connection and click the Next button. Click Add Printer and set up a printer according to the wizard. When the printer has been added, click the Refresh button, select the newly added printer and then click the Finish button. To not add a printer, click the Finish button. Note 6 8 Select the LAN device, setup the IP address and click the Next button. When the network settings are complete, the ’Do you want to move to the newly added location now?’ message appears.
Using in Another Location By configuring the network settings (IP address, printer setting, etc.) for each location, you can immediately access the network in one click, without performing the network setting procedures regardless of your location. 1 2 3 If the Internet connection is a wireless LAN, you have to select an AP as follows. Click on the Network connection ( ) icon on the Taskbar using the touchpad and select Connect to the Network. Select an available AP and click the Connect button.
Diagnosing the Network Status 3 You can diagnose the network state and find solutions for why you cannot connect to the network. 1 2 Launch Easy Network Manager. 4 Select Management > Diagnose Status from the menu. 97 The Network Connections window appears. Click Start to start the network diagnosis. When the diagnosis is complete, a device with a problem is marked by an exclamation mark icon with a description of the problem at the bottom of the window.
Connecting with a Modem The procedures to connect to the Internet via a phone connection are described below. Before You Start! 1 2 ■ To connect to the Internet, you have to subscribe to an Internet connection service of an Internet service provider (ISP). ■ A modem port is optional and provided for some models only. Pull the cover forwards holding the groove at the side to open it and connect the landline to the modem port. Take care to not connect a digital phone line to the modem port.
Bluetooth Bluetooth is wireless communications technology that allows access to nearby devices such as another computer, a cell phone, printer, keyboard, mouse, etc. without a cable connection. Using Bluetooth, you can exchange files, connect to the Internet, and construct a private network as well as communicate with a keyboard, mouse, printer, etc. without a cable connection. Before You Start! ■ The Bluetooth supporting function is only available between devices (a computer, cell phone, PDA, printer, etc.
3 Using Bluetooth The procedures to exchange files between computers supporting Bluetooth and to use other Bluetooth devices are described below. If the Add Bluetooth Device Wizard screen appears, select the My device is set up and ready to be found and click the Next button. Using Bluetooth Devices (Connecting Headset supporting Bluetooth) As an example, the procedures to connect to a headset supporting Bluetooth will be described below.
5 Exchanging Files between Bluetooth Computers Enter the PIN in the device PIN field and click the Next button. The procedures to exchange files between computers with Bluetooth capability are described below. 1 2 Note For pairing, a PIN is required. Since a PIN is provided by the headset manufacturer, refer to the corresponding manual. 6 If the Completing the Add Bluetooth Device Wizard window appears, click Finish.
3 Usage Instructions Select a computer to send the file to and click the OK button. Bluetooth devices to be connected must be within a 3m (10 ft.) distance. For a better communications environment, there should be no walls or obstacles between the Bluetooth devices. You can connect to only one Bluetooth device at a time for a phone connection, data syncing, electronic business card exchange, FAX transmission/reception, sound related functions, and serial port functions.
Chapter 5.
Introducing Programs Using the software supplied with the Samsung computer, you can easily use functions and troubleshoot problems. Try to use the software after learning about the basic use of the software. For detailed information, refer to the help section of the corresponding software. Before You Start! Every software program may not be provided depending on your computer model. In addition, the screen capture images may differ from actual ones depending on the computer model and software version.
Multi Media Functions CyberLink PowerDVD ( Easy Network Manager ( Easy Network Manager is a program that enables you to easily configure the network settings. You can configure the network settings for each location and you can also diagnose the network status p. 94 ) (Optional) To use this program, you have to install the program manually using the additionally supplied System Software Media (or other CD). p.
Troubleshooting Functions SAMSUNG Magic Doctor ( ) SAMSUNG Magic Doctor is troubleshooting software provided by Samsung Computer for system diagnosis, and restoring the system. The system diagnosis function enables users to diagnose system problems without assistance from others.
CyberLink PowerDVD (Optional) CyberLink PowerDVD is a DVD player program. Before You Start! If it is not installed on your hard disk drive, install it using the System Software media (or additional CD). The CyberLink PowerDVD program is optional and may be not provided for some models. 1 2 4 Insert a DVD title into the DVD drive. Then click the Play icon in the control panel of CyberLink PowerDVD to play the DVD title. Select PowerDVD and click the OK button. After a moment, the DVD title will play.
■ Detailed Usage For more detailed usage, click Start > All Programs > Cyberlink DVD Suite > Power DVD > PowerDVD Help. Note ■ DVD Region Code A DVD title has a region code according to the international specifications so that it can be played only in that specific region. DVD titles with a region code will only play on DVD drives and program for playing with the same region code.
Samsung Update Plus (Optional) Samsung Update Plus is software that examines and updates the Samsung software and drivers installed on your Samsung computer to the latest version. Before You Start! ■ To search for updates and update your computer using Samsung Update Plus, your computer must be connected to the Internet. ■ The update search result may differ depending on your computer model. Samsung Update Plus does not provide updates for applications installed after purchasing the computer.
3 If there are available software or driver updates for your computer, the available updates will be listed. Select the required updates from the list and click on Install Updates to start the update. Automatic update items display Note Updates that must be installed separately. Caution If you select Install for an update item that must be installed separately, a message appears informing you of this. Follow the instruction message to correctly install it.
Play AVStation (Optional) Play AVStation is an integrated multimedia program that enables users to enjoy music, photographs, video, movies, etc. using a single program. This section describes the basic usage of Play AVStation. Before You Start! ■ The screens used in this manual may differ from actual screens according to the program version. ■ For detailed usage, refer to the program help. ■ TV Station is only available for systems supporting the TV function. This computer is not supported.
Movie Station Launch Play AVStation and click on Movie on the Station Bar. Mini Mode View Movie List and Thumbnail Window Movie Library Play Control Buttons Play Highlight Button EDI Button (Enhanced Digital Image Setting) EDS Button (Enhanced Digital Sound Setting) Note Volume Control Capture Button Create Highlight/Chapter Button ● What is EDI (Enhanced Digital Image)? EDI (Enhanced Digital Image) is visual quality enhancement technology developed by Samsung Electronics.
Playing a Movie File The procedures to play a movie file registered to the MOVIE Library are described below. For the procedures to register files to the Library, refer to p. 114. 1 2 Move to Movie Station and double-click All Video in the left menu pane. Double-click a movie file. The file is played. ■ Playing a Video File not Registered to the Library Click Menu > File > Open File, select a movie file to be played and click Open. The selected file is automatically registered to the Library and played.
Adding Videos to the Library The Movie Library is a library with movie files to be used by Movie Station. The procedures to add movie files saved on the computer to the Library are described below. You can add files or folders. As an example, the procedures to add folders are described below. 1 Select Menu > File > Add to Library > Folder. 2 Select a target folder and select Video Files option in the Target File Type field. 3 The movie files found in the selected folder are added to the Library.
3 Highlight / Chapter Function Using the Highlight function, you can watch a highlighted part of a movie such as a sports or news item, etc. Using the Chapter function, you can create chapters for a movie and play the movie from any of the chapters. Note 1 To watch a highlight, double-click a file made and click the Highlight icon at the bottom right of the current movie file. The Highlight/Chapter function works on the basis of specific standards depending on the target video.
Music Station Launch Play AVStation and click Music on the Station Bar.
3 Playing an Audio CD The procedures to play an audio CD are described below. 1 2 The CD is played. Insert an audio CD into the CD drive. Note If the AutoPlay window appears, select Play audio CD using Samsung PLAY AVStation. 117 If a CD is already inserted in the CD/DVD drive, select CD in the Audio CD folder of the Library and double-click the title. The CD is played.
Playing a Music File If a music file is registered to the Music Library, you can easily play the music file. For the procedures to register tracks to the Library, refer to p. 119. 1 2 Move to Music Station and double-click on All Music. Double-click a music file. The file is added to the playlist and played. Play a Track not registered to the Library Note Click Menu > File > Open File, select a music file to be played and click Open. The selected track is registered to the Library and played.
3 Adding Music Files to the Library The Music Library is a library with music files used by Music Station. The procedures to add music files saved on the computer to the Library are described below. The music files found in the selected folder are added to the Library. The music files are registered. You can add files, folders. As an example, the procedures to add a folder are described below. 1 Select Menu > File > Add to Library > Folder.
Photo Station Launch Play AVStation and click on Photo on the Station Bar.
3 Viewing an Image The procedures to view images registered to the Photo Library individually and via a SlideShow are described below. For the procedures to register image files to the Library, refer to p. 123. 1 2 ■ The selected image file is registered to the Library and displayed in the Preview window. ■ Viewing images using the SlideShow function Click the SlideShow button at the bottom of the Photo Station. Double-click on an image. The selected image is displayed in the Preview screen.
4 Editing an Image You can change the shape of an image, edit an image or apply special effects to an image. The image editing functions are described below. 1 Move to Photo Station and double-click on All Images. 2 Click on a folder which includes images, and the images in the folder are displayed. 3 If the Preview screen appears, click the Edit button at the bottom left. If the image editor screen appears, edit the image using the Edit tools at the bottom of the window.
Adding Images to the Library The Photo Library is a library with image files to be used by Photo Station. The procedures to add image files saved on the computer to the Library are described below. You can add files, add folders. As an example, the procedures to add folders are described below. 1 2 Select Menu > File > Add to Library > Folder. Select a target folder and select the Image File option in the Target File Type field. The image files found in the selected folder are added to the Library.
AVStation Now (Optional) Using AVStation Now, you can easily and quickly play music, photographs, movies when the computer is on/off. Start Press the AV( ) button when the computer is on or off to launch AVStation Now. Exit Move the mouse pointer to the top of the screen and click the Exit ( ) button to exit AVStation Now. Screen Layout Each menu of AVStation Now is linked to a multimedia program so that you can use the corresponding function.
Chapter 6.
LCD Brightness Control You can adjust the LCD brightness in 8 levels. Before You Start! The LCD brightness is the brightest (Level 8) when the computer is running on AC power, and it becomes dimmer when running on battery power. Controlling the Brightness Using the Keyboard Adjust the LCD brightness by pressing the Fn + ( ) key or the Fn + ( ) key. The LCD brightness can change up to 8 levels and the brightness increases by 1 level when pressing the Fn + ( once.
BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs. Before You Start! ■ Use the BIOS setup to define a boot password, change the booting priority, or add a new device. Since incorrect settings may cause your system to malfunction or crash, take care when configuring the BIOS. ■ The functions of the BIOS setup are subject to change for product function enhancement purposes. Note The BIOS Setup menus and items may differ depending on your computer model.
3 After a moment, the BIOS setup screen appears. The items in the BIOS setup may differ depending on the product. Setup Menu Help Help for the selected item appears automatically.
The BIOS Setup Screen Menu Description Main Used to change the basic system and environment settings. Advanced Used to configure advanced functions on your computer around devices and chipsets. Security Used to configure security functions, including passwords. Boot Used to set the boot priority and other boot options Exit Used to exit the Setup either saving the changes or not.
System Setup Keys In the Setup, you have to use the keyboard. F1 Press to view the Setup Help. Up & Down Keys Press to move up and down. F5/F6 Press to change the item value. F9 Press to load the default Setup settings. ESC Press to return to a higher level menu or to move to the Exit menu. Left & Right Keys Press to move to another menu. Enter Press to select an item or to enter a sub menu. F10 Press to save the changes and exit Setup.
Setting a Boot Password When setting a password, you have to enter a password to use the computer or enter the BIOS Setup. By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer. Before You Start! Do not lose or forget your password. If you have forgotten your password, contact a Samsung service center. In this case, a service fee will be charged.
Setting a User Password Deactivating the Password Users can start the system with a user password, but cannot enter the System Setup. By doing this, you can prevent other users from entering Setup. 1 Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password. In the Set User Password item, press and complete the procedures from Step 3 of Setting a Supervisor Password.
Changing the Boot Priority The default boot priority of your computer is the CD-ROM first, then a removable device and then the hard disk drive in this order. By default, the highest boot priority device is set to the CD-ROM/DVD drive. As an example, the procedures to change the highest boot priority device to the hard disk drive are described below. 1 2 3 Select the Boot menu in the BIOS Setup. Press the down key (↓) to move to the IDE HDD itemand press the F6 key to move up to the top item.
Upgrading Memory One or more memory modules are installed on the computer. There are 2 memory slots. One is inside the main board and the other is at the bottom of the computer. You can only add or replace memory to and from the memory slot at the bottom of the computer. Before You Start! ■ Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the computer is in Sleep mode.
3 4 Push the memory module down so that it is completely fixed. If the memory does not fit easily, push the memory module down while pulling the memory module latches outward. Close the memory compartment cover and fasten the screw. Removing a memory module Note Pull the memory module latches outward. The memory module will pop up. Remove the memory module out at an angle of 30 degrees.
Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power. A Lithium-Ion smart battery is supplied with this computer. Before You Start! Carefully read and follow the precautions printed on the battery before using the battery. Precautions Use only chargers specified in the User Manual. Caution Never heat the battery pack, put it near or in a fire or use at a temperature higher than 60°C, as this may cause fire.
To view on the battery Charging the Battery 1 2 Separate the battery and press the PUSH button inside the battery. The remaining battery charge (%) will be displayed. Attach the battery and connect the AC adapter to the DC-in jack of the computer. The battery will then start charging. When charging is complete, the Charge LED turns green.
Extending the Battery Usage Time Decreasing the LCD Brightness Press the Fn + ( ) keys on the keyboard to decrease the LCD brightness to extend the battery usage time. Using Easy Battery Manager Easy Battery Manager is a power management program that enables using the battery power efficiently. You can select an optimized power mode according to your requirements. 1 2 Click Start > Control Panel > Hardware and Sound > Power Options.
Samsung Optimized This mode is appropriate for normal conditions. It maximizes the system performance when the computer is running on AC power while maximizing the battery usage time when the computer is running on battery power. Multimedia This mode is appropriate for a multimedia environment that requires maximum system performance. Therefore, the battery usage time may be reduced in this mode.
4 Using the Battery Calibration Function When charging/discharging the battery repeatedly for a short time only, the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display. In this case, the actual battery charge and the remaining charge display will be the same by discharging the battery completely using the Battery Calibration function, and then recharging it again. 1 2 3 Disconnect the AC power adapter after turning off the computer.
Using the Security Lock Port You can connect a Kensington lock to the Security Lock port to prevent your computer being stolen when you have to use the computer in a public place. To use this feature, you have to purchase the Kensington lock additionally. To use the Kensington lock, refer to the product manual. Tie the Kensington lock cable to a fixed object and install the other end of the cable to the Security Lock port.
Chapter 7. Windows Media Center About Package Contents and the Program Guide 143 Connecting and Setting Up Media Center Optional Devices Using Media Center 144 144 148 Start Screen Layout 148 Pictures + Videos 149 Music 153 TV + Movies 157 Windows Media Center is provided for some versions of Windows Vista only. Therefore, this chapter is for models with Windows Media Center only.
About Package Contents and the Program Guide About the Package Contents The package contents of your Samsung computer may differ depending on the computer model. The Media Center remote control, external-type remote control sensor and TV tuner card are not supplied with your computer and the devices are not required to use Media Center. However, if you purchase and connect the devices, you can more easily use the various Media Center features.
Connecting and Setting Up Media Center The basic usage of Media Center for Microsoft Windows Vista Home Premium is described below. Before You Start! ■ This manual will describe procedures assuming that you are using Media Center with a mouse. ■ Since Media Center supports the use of a mouse, keyboard and remote control, in this manual, [Select] means clicking with the mouse or pressing the corresponding button on the remote control.
TV Tuner Card ► Connecting the TV antenna Using a TV tuner card, you can watch and record TV programs. To use the Media Center TV function, you have to connect the TV antenna to the TV tuner card. Some models have built-in TV tuner cards. This manual describes their usage assuming your computer has a built-in TV tuner card. If your computer has a built-in TV tuner card, connect the TV antenna cable to the TV Antenna Input port.
3 Media Center Setup Connect all necessary devices and setup Media Center. You have to complete the settings to use Media Center. 1 2 If the following start screen appears, select the installation option. Express Setup enables you to use the basic functions of Media Center when clicking OK. However, you cannot use TV and Internet related functions using Express Setup. Turn the computer on. Custom Setup allows you to configure all settings including TV and Internet settings.
4 If you have selected Custom Setup, continue with the setup according to the Setup Wizard instructions. Changing the Media Center settings If there are no installed TV tuner cards, the TV related setup steps will appear during the Media Center setup. Note In addition, if the computer is not connected to the Internet, you cannot setup and use the TV Guide (Channel Information). 5 When the Media Center setup is complete, click Finish. Now you can use the Media Center.
Using Media Center The descriptions of the Media Center start screen and basic functions will be given below. Start Screen Layout Before You Start! If you selected Run Setup Later in the Media Center start screen or did not complete the Setup Wizard, the Setup Wizard screen appears when launching Media Center. If you complete the setup, the Media Center start screen appears. Click Start > Windows Media Center or Start > All Programs > Windows Media Center.
Pictures + Videos: You can view pictures, images and video files. Pictures + Videos Music: You can listen to music files, audio CDs and the radio. In Pictures + Videos, you can view pictures and videos registered to the Media Center library. TV + Movies : You can watch and record TV programs and play DVD titles. In addition, you can also view files not registered to the library by registering them, as well as viewing files on a removable disk.
3 If the Library Setup screen appears, select Add Folder to Watch. 4 Specify the path for the folder according to the instructions on the screen. 5 Viewing Pictures and Images The procedures to view pictures and images registered to the library are described below. Note If the following screen appears, click Finish. You can view the newly added folder in the Picture Library or Video Library. 1 2 Launch Media Center, and select Pictures + Videos. Select Picture Library.
4 5 If you select a picture, the picture is displayed in full screen. Viewing Videos You can view another picture by using the Play Control buttons or the direction buttons on the keyboard. The procedures to view videos registered to the library are described below. To view pictures in a SlideShow, click on Play SlideShow. Note 1 2 Alternatively, select Pictures + Videos > Play All. Then the pictures in the registered folder are displayed in a random order.
3 Viewing Pictures and Videos Saved on Removable Media After a while, a window notifying you that new media has been found appears. Select View Pictures or View Videos. The procedures to view pictures, images and videos saved on removable media in Media Center are described below. 1 2 Launch Media Center. Insert a removable media with picture, image or video files. Removable media refers to a CD, DVD, USB flash memory, memory card, etc.
Music 3 In Music of Media Center, you can play music files or audio CDs. In addition, you can rip the tracks of an audio CD onto the computer and play them later individually or by using a playlist. Select Copy CD at the bottom left of the Music Player window. Playing an Audio CD 1 2 Launch Media Center. Press the Eject button of the CD-ROM drive to open the CD tray and insert an audio CD. The tracks on the CD are played automatically. Ripping an Audio CD 1 2 Note Launch Media Center.
4 5 2 If the Rip CD window appears, click Yes. Ripping a CD begins by showing rotating CD icon on the right side that indicates ripping a CD is in progress. When ripping is complete, the ripping CD complete message appears. Note The ripped tracks are displayed in the Music > Music Library of Media Center and in the Library of Windows Media Player. The ripped tracks are copied to Start > Music of the Desktop as album files.
4 Using Playlists You can easily create, manage and play a playlist with ripped music albums and music files downloaded from the Internet. 1 2 3 The + mark starts blinking at the bottom left of the Media Player window and disappears the selected music files are added to the queue. Launch Media Center, and select Music > Music Library. You can search for a music file by selecting the album, artist, genre or song at the top. If you select Playlist > All Music, all registered music files are listed.
6 Select Save As Playlist, enter a playlist name and select Save. If you have a remote control, you can enter a name using the numeric buttons on the remote control. ■ If a music file appears in the Media Center even after the file has been deleted If you deleted a music file, you must also manually delete the file from the Media Center playlist. Note ■ Deleting a playlist from Media Center Select Media Center > Music Library > Playlist, select a saved playlist and click Delete.
TV + Movies Play DVD: The DVD title appears. Before You Start! The TV function is only available when a TV tuner card is installed on your computer. TV + Movies Menus Search: You can search for a program by the title, keyword or genre. Live TV: You can watch live TV programs. What is a TV Program Guide - EPG? Recorded TV: You can watch recorded TV programs. Note Guide (TV Broadcast Program Guide - EPG) You can view the TV program guide.
3 Playing a DVD The procedures to watch a DVD title are described below. 1 2 After a moment, the DVD menu is displayed. It the DVD menu is not automatically displayed, select Play DVD in the start screen. Launch Media Center. Press the Eject button of the DVD drive to open the tray and insert a DVD title. If you insert a DVD title without starting Media Center, the Auto Play selection window appears. Note Select Play DVD Video using Media Center and click OK.
Online Media You can access more online content through Online Spotlight. Online Spotlight is a service provided by content providers via the Media Center. You can enjoy all kinds of multimedia content such as movies, news, sports, etc. over the Internet. Note ■ To use Online Media, your computer must be connected to the Internet. ■ For problems encountered while using Online Spotlight, contact the corresponding online service provider.
Chapter 8.
Using McAfee SecurityCenter (Optional) A computer virus is a program that damages computer files and information saved on a computer. A computer is infected by an already infected file or by another computer over the Internet. Let’s learn how to use McAfee SecurityCenter in order to scan and remove viruses and to protect your computer from various threats on the Internet. Before You Start! When McAfee SecurityCenter is run for the first time, the Registration screen appears.
Using Samsung Magic Doctor (Optional) Magic Doctor is troubleshooting software provided by Samsung Computer. A user can diagnose system problems via one-click or by selecting diagnostic items. Before You Start! The screens used in this manual may differ from actual screens according to the program version. 3 Diagnosing the System Diagnosing the System is a function to check system connections and diagnose problems affecting to system operation and solve it.
Viewing My Computer Information You can view detailed information about your computer in Samsung Magic Doctor. Click on the icon in the shape of a monitor at the bottom of the main program screen to view detailed information about the computer.
Reinstalling Software You can reinstall software using the System Software Media, when a device driver or computer application is not working properly. Before You Start! When software is not working properly, it is recommended removing the software using the Add or Remove Programs of the Control Panel and reinstalling the software using the System Software Media. The System Software Media is supplied as a CD or DVD depending on your computer model.
Standard Installation Minimum Installation Custom Installation If you select this option, programs not currently installed on the computer are listed. If you select this option, programs are listed that need to be installed on the computer (drivers, Windows updates, etc.). You can conveniently use this option, when you need to install essential programs only. If you select this option, you can select the programs to be installed.
Q&A This section provides information on possible problems, solutions and other references for using the system. Display Related Q Q The LCD screen is too dark or too bright. A Turn the LCD backlight on or adjust the LCD brightness. Press Fn + ( ) to turn the LCD backlight on or press Fn + ( ) or Fn + ( A Press the Fn + ( The screensaver is activated while Media Player is playing a movie or video clip.
Q The shortcut icons are not displayed on the screen even if I press the shortcut key. Modem Related Q A The shortcut icons only appear when the Easy Display Manager program is installed. Q I cannot hear the modem A1 Check if the phone line is properly connected to the modem. I have connected a monitor (or projector) to the computer, but the colors on the monitor are abnormally displayed. A2 Check if the modem driver is properly installed.
Q When you are unable to make a call when using a switchboard A In general, the dial tone of a switchboard or a digital phone switching system is not continuous unlike that of a PSTN line. Therefore, the modem may not make a phone call as it misreads the dial tone as a busy tone. In this case, perform the following. Configuring the Model in the Control Panel Click Start > Control Panel > Hardware and Sound. Click on Phone and Modem Options.
Q How can I receive a FAX in Sleep mode (Standby Mode)? Wired Network (LAN) Related Q A To receive a FAX when the computer is in Sleep Mode (Standby Mode), the computer must be configured as follows. The FAX program must be configured so that it receives FAXES automatically referring to the FAX program manual. Click Start > Control Panel > Hardware and Sound. Click on Phone and Modem Options.
Q Click Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Right-click on the Wireless Network Connections and select Disable. Wireless Network (WLAN) Related Q I cannot find an AP. A Verify whether the Wireless LAN LED is on. If it is turned off, turn it on by pressing the Wireless LAN On/Off button (Fn + ).
Q Q The signal strength is excellent, but I cannot connect to the network. ► Even if the signal strength is excellent, the network connection may not operate properly if the TCP/IP properties are not properly configured, or the network key (encryption key) is incorrect. I cannot connect to the AP. ► Check the Computer Settings A1 Select Start > All Programs > Accessories > Windows Mobile Center and check the wireless device status.
A2 Verify whether the same network key (encryption key) has been entered for both the AP and the computer. The network key is an encryption key for encrypting the data transmitted between the AP and the computer. It is recommended setting the network key manually. A6 Check the network key settings (encryption key) again.
Q I cannot connect to a computer connected to the Ad-Hoc network. A1 Check the security settings and network name of the wireless Ad-Hoc network. A2 Check the TCP/IP settings of the computers connected to the wireless Ad-Hoc network. The IP addresses of the computers to be connected to a wireless Ad-Hoc network must be set to the same sub-network address.
Q The wireless LAN does not work properly when there is a device operating on an adjacent frequency in the vicinity of the product. A1 Channel interference may occur when a wireless video transceiver or a microwave oven is being used. If you experience channel interference from other equipment, we recommended changing the channel for connecting to the AP. For more information about AP settings, refer to the User Manual supplied by the AP manufacturer. A2 Since IEEE802.
Q Bluetooth Q The Korean or Chinese characters in a business card received via Bluetooth are broken A1 If the headset is already connected to another device, you will not be able to find the headset and cannot connect to the headset even if the headset is found. Disconnect the connection to the other device and then start the search again. A1 If you send a business card including Korean or Chinese characters by selecting a Select a business card in the file (*.vcf, *.
HD DVD Note Right-click over the Bluetooth icon on the taskbar, select Audio tab > Connected Device, and check if Activate Mono Headset is selected. If not, right-click over the device and select Connect. Right-click over the Speaker icon on the taskbar, select Playing Device > Mono Device > Load Defaults and then click the OK button. The Bluetooth Mono Headphone and Microphone functions are activated.
Blu-Ray Q Can I burn a HD DVD disk using a general CD-RW or DVD-RW drive? Q A A general CD-RW or DVD-RW drive does not support burning the HD DVD format. Q Can I burn a HD DVD disk using the CyberLink DVD Solution? Is it compatible with the existing CD/DVD formats? A All Burning, Playback and Authoring functions are supported for the CD/DVD formats. Q A Although the CyberLink DVD Solution supports burning the CD and DVD formats, it does not support burning the HD DVD format.
Other Q Can I burn a Blu-ray disk using a general CD-RW or DVD-RW drive? A A general CD-RW or DVD-RW drive does not support burning the Blu-Ray format. Q Q A Windows Vista cannot display more than 4GB of memory due to license problems and driver compatibility reasons. Although the memory capacity is displayed as 3GB in the system information, the 4GB memory is recognized and can be used normally.
About Intel Media Sharing Software (Only for some models) Intel Media Sharing Software enables users to access, download and play all kinds of media files such as music, video, image and picture files in the home network environment. Intel Media Sharing Software runs on Intel CPU installed Intel Centrino mobile PCs only. You can achieve the best performance when the software is used with the Intel Viiv system.
Product Specifications The system specifications may differ depending on the derived models. For detailed system specifications, refer to the product catalog. CPU NT-Q70/Q71 * Intel® Core2 Duo Processor, Intel Celeron Processor Cache Memory * Main Chipset* * 1M / 2M / 4M 512MB ~ 2GB Main Memory Hard Disk Drive ODD * Intel 965PM Intel 82801HBM(ICH8-M) * 9.
Wireless LAN Specifications (802.11a/b/g Card) Intel(R) PRO/Wireless 3945ABG Network Adapter Device The Name of the Registered Equipment : Special Low Power Wireless Device for Wireless Data Communication Systems. Item Physical Specifications Power Specifications Network Specifications * Detailed Specifications Dimensions 30.0 × 50.95mm (Width X Height) Operating Temperature And Humidity Same as System Operations Sleep Mode 70mW Receive Mode 0.95W Transmission Mode 1.4W Power 3.
Radio Specifications RF Band 2.4GHz, 5GHz Supported Channels Channels allowed per country. Device Transceiver Standard Output Power 5 mW 11a mode : OFDM Modulation Scheme 11b mode : DSSS 11g mode : OFDM 11a mode** : 54, 48, 36, 24, 18, 12, 9, 6 Data Rate (Mbps)* 11b mode : 11, 5.5, 2, 1 11g mode*** : 54, 48, 36, 24, 18, 12, 9, 6 Antenna Type Built-in Antenna * The data rate may differ from the real data transmission rate.
About the Product Capacity Representation Standard Registered Trademarks Samsung is a registered trademark of Samsung Co., Ltd. SENS is a registered trademark of Samsung Electronics Co., Ltd. Intel, Pentium/Celeron are registered trademarks of the Intel Corporation. Microsoft, MS-DOS, and Windows are registered trademarks of the Microsoft Corporation. The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes.
Glossary The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup Direct X A way to save the current data to restore it later if necessary. A backup is a way to restore computer data when the data or computer is damaged. An application interface developed to enable Windows application programs to access hardware devices at a very high speed.
Firewall LCD (Liquid Crystal Display) A security system used to protect an internal network or intranet from external networks There are Passive Matrix and Active Matrix LCD types. This computer uses the Active Matrix type LCD called a TFT LCD. Since an LCD is implemented by transistors instead of a cathode-ray tube unlike a CRT, its size can be slim. And because it does not blink, it reduces eye strain. through an authentication procedure.
Quick Launch Sleep Mode This refers to a toolbar that can be configured so that you can launch a program such as Internet Explorer or display the Windows Desktop with one click. You can add any icon to the quick launch area of the Taskbar and launch frequently used program by clicking that icon. A power mode that enables computers to save power consumption when they are not being used. When a computer is in Sleep Mode, the data on the computer memory is not saved to the hard disk.
USB (Universal Serial Bus) This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS/2. While USB 1.1 supports 12Mbps (12 million bits per second), USB 2.0 supports a data rate that is 40 times (480Mpbs) faster than that of USB 1.1. The data rate of USB 2.0 is equivalent to that of IEEE1394. Therefore USB 2.0 is used for A/V devices supported by IEEE 1394 and a 2nd HDD and CDRW that require a high data rate.
Index AVStation Now 124 136 140 127 99 133 47 137 45 92 57 76 107 D Dual View Desktop / Change 57 66 E Easy Battery Manager Easy Network Manager 126 Memory Modem Connection Multi Card Slot Multimedia 138 94 Samsung Update Plus Security Lock Port Safety Precautions Shortcut Keys SlideShow Status Indicators Network Network Status Diagnosis 94 97 Password Play AVStation Playing Music Product Name Product Specifications Program 131 111 118 33 180 104 R Recorder Remaining Battery Charge Resolution
Contact SAMSUNG WORLD WIDE [U.S.A. / U.K. / AUSTRALIA / HONG KONG / MALAYSIA / SINGAPORE] Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung products, contact the SAMSUNG customer care center. Customer Care Center TEL Web Site 1 800 SAMSUNG (7267864) www.samsung.com U.S.A. 0870-726-7864 www.samsung.com/uk U.K. 1300 362 603 www.samsung.com/au AUSTRALIA HONG KONG MALAYSIA SINGAPORE 2862 6001 www.samsung.com/hk 1800-88-9999 www.samsung.com/my 1800-SAMSUNG(7267864) www.
[ITALY] Contatta SAMSUNG Se hai commenti o richieste sui prodotti Samsung contatta il nostro Servizio Clienti. Customer Care Center TEL Web Site 199 153 153 www.samsung.com/it/ ITALY [RUSSIA / UKRAINE] Customer Care Center RUSSIA UKRAINE TEL Web Site 8-800-200-0400 www.samsung.ru 8-800-502-0000 www.samsung.com/ur TEL Web Site 800-810-5858 / (010) 64751880 www.samsung.com.cn TEL Web Site 1800-29-3232 / 02-689-3232 www.samsung.
