E-MANUAL imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model______________ Serial No.
Contents Advanced Features Preference Features Channel Menu • Using the Channel Menu 1 • Setting the Network 49 • Using the 3D function 114 • Using the Channel 7 • Setting the Time 85 • Viewing TV using the 3D function 115 • Using Favourites Channels 12 • Locking Programme 91 • Smart Hub 130 • Memorising Channels 14 • Economical Solutions 93 • Setting up SMART HUB 145 • Other Features 17 • Other Features 96 • AllShare™ 163 • Picture In Picture (PIP) 105 • Anynet+ 171 • S
Channel Menu ❑❑ Using the Channel Menu Press the SMART HUB button to select the menu you want to use. Each screen will be displayed. Search Your Video Connect to the Internet and enjoy a variety of contents throuth Smart Hub. This feature may not be available in some countries. For some of the countries listed, local language characters might not be displayed properly.
■■ Schedule Manager OO SMART HUB → Schedule Manager → ENTERE You can view, modify or delete a channel you have reserved to watch. Using the Timer Viewing You can set a desired channel to be displayed automatically at the intended time. Set the current time first to use this function. ◀ 1. Press the ENTERE button to add programme to schedule manually. The l or r button to select the Timer Viewing.
2. Press the l / r / u / d buttons to set the Channel, Repeat or Start Time. ●● Channel: Select the desired channel. ●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at your convenience. If you select Manual, you can set the day you want. NN The c mark indicates the date is selected. ●● Date: you can set the desired date. ◀ NN It is available when you select Once in Repeat. ●● Start Time: You can set the start time you want.
NN On the Information screen, you can change or cancel a reserved information. ●● Cancel Schedules: Cancel a show you have reserved to watch. ●● Edit: Change a show you have reserved to watch. ●● Return: Return to the previous screen. NN Only memorised channels can be reserved.
■■ Channel List You can view all the channel searched. OO When you press the CH LIST button on the remote control, Channel List screen will be displayed at once. Channel List All 6 Air 6-1 TV #6 7 Air 8 Air 9 Air No Information 9-2 TV #10 9-3 TV #11 9 Air 10-1 TV #12 10-2 TV #13 10 Air 11 Air Air L Ch.Mode E Watch U Page ●● The displayed image may differ depending on the model.
NN Using the operation buttons with the Channel List. ●● l r (Ch. Mode): Move to the type of channels you want to display on the Channel List screen. (All, Favourites 1~5) ●● E (Watch / Information): Watches the channel you select. / Displays details of the selected programme. ●● k (Page): Move to next or previous page.
❑❑ Using the Channel ■■ Channel OO SMART HUB → Channel → ENTERE ◀ Delete added channels or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the All Channels screen. Change the antenna, or channel settings using the menus in the top right corner of the screen.
●● Edit Mode: Delete channels assigned to Favourites. Refer to “Using the Favourites Channels” for details on how to assign a channel to Favourites. Select All: Select all the channels. NN To select all the files in the current page, select Select All at the top of the page, and press ENTERE.
Using the TOOLS button with the Channel ●● Edit Favourites: Set channels you watch frequently as favourites. 1. Select the Edit Favourites, then press the ENTERE button. 2. Press the ENTERE button to select Favourites 1-5, then press the OK button. NN One favourites channel can be added in several of favourites channels among Favourites 1-5. ◀ ●● Lock / Unlock: Lock a channel so that the channel cannot be selected and viewed.
NN NOTE ●● This function is available only when the Channel Lock is set to On. ●● The PIN input screen appears. Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option. ●● Edit Channel Name: Assign your own channel name. NN This function may not be supported depending on the region. ●● Edit Channel Number: Edit the number by pressing the number buttons ◀ ▶ desired. NN This function may not be supported depending on the region.
Channel Status Display Icons Icon Operations a An analogue channel. c A channel selected. F A channel set as a Favourites 1-5. \ A locked channel.
❑❑ Using Favourites Channels ■■ Favourites Shows all favourites channels. ●● Edit favourites t: You can set the selected channels to desired Favourites group. NN The “F” symbol wil be displayed and the channel will be set as a Favourites. ◀ 1. On the Channel screen, select a channel and press the TOOLS button. NN If you want to add multiple channels, use the Edit Mode menu in the top right corner of the Channel screen.
2. Add or delete a channel in the favourites groups you want among 1, 2, 3, 4 and 5. NN One or more channels can be selected. NN The c mark appears to the left of the selected files. 3. After you have changed the settings, the channel list for each group can be viewed in favourites channels.
❑❑ Memorising Channels OO MENUm → Channel → ENTERE ■■ Area Select your country so that the TV can correctly auto-tune the broadcasting channels. ■■ Auto Tuning ◀ Scans for a channel automatically and stores in the TV. Select the antenna source to memorise. The option may differ depending on country. NN If a channel is locked using the Channel Lock function, the PIN input window appears. Enter your 4 digit PIN number(the default is 0000).
■■ Manual Tuning Scans for a channel manually and stores in the TV. NN If a channel is locked using the Channel Lock function, the PIN input window appears. Enter your 4 digit PIN number(the default is 0000). NN This function may not be supported depending on the region. ◀ 1. Press the u / d / l / r button to select New. 2. Set the Programme, Colour System, Sound System, Channel and Search. 3. Press the d button to select Store. When scanning has finished, a channel is updated in the channel list.
NN Channel mode ●● P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode. ●● C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
❑❑ Other Features OO MENUm → Channel → ENTERE ■■ Fine Tune If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear. ◀ NN Settings are applied to the channel you’re currently watching.
Basic Features ❑❑ Changing the Preset Picture Mode OO MENUm → Picture → Picture Mode → ENTERE ■■ Picture Mode t Select your preferred picture type. NN When connecting a PC, you can only make changes to the Standard and Entertain. ◀ ●● Dynamic: Suitable for a bright room. ●● Standard: Suitable for a normal environment. ●● Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain. ●● Movie: Suitable for watching movies in a dark room. ●● Entertain: Suitable for watching movies and games.
❑❑ Adjusting Picture Settings OO MENUm → Picture → ENTERE ■■ Backlight for LED TV / Cell Light Colour / Tint (G/R) for PDP TV / Contrast / Brightness / Sharpness / Your television has several setting options for picture quality control. NN In analogue TV, AV modes of the PAL system, the Tint (G/R) function is not available. ◀ NN When connecting a PC, you can only make changes to Backlight for LED TV / Cell Light for PDP TV , Contrast, Brightness and Sharpness.
❑❑ Changing the Picture Size OO MENUm → Picture → Screen Adjustment → ENTERE ■■ Screen Adjustment ●● Picture Size t: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. –– 16:9: Adjusts the picture size to 16:9 for DVDs or wide broadcasting. ◀ –– Wide Zoom: Magnifies the picture size more than 4:3. NN Adjusts the Position by using u, d buttons.
–– Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. NN Adjusts the Zoom or Position by using u, d button. –– 4:3: The default setting for a movie or normal broadcasting. NN Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty.
–– Smart View 1: Reduces the 16:9 picture by 50%. for LED TV –– Smart View 2: Reduces the 16:9 picture by 25%. for LED TV NN Smart View 1 is enabled only in HDMI mode. NN Smart View 2 is enabled only in HDMI or DTV mode. NN The picture size can vary depending on the input resolution when content is played using Videos under My Contents or Smart Hub.
NN NOTE ●● When Double (Œ, à) mode has been set in PIP (Picture-in-Picture), the Picture Size cannot be set. ●● Depending on the input source, the picture size options may vary. ●● The available items may differ depending on the selected mode. ●● In PC mode, only 16:9 and 4:3 modes can be adjusted. ●● Settings can be adjusted and stored for each external device connected to an ◀ input on the TV.
●● After selecting Wide Zoom or Zoom: 1. Press the d button to select Zoom / Position. 2. Press the ENTERE button. 3. Press the u or d button to move the picture up or down. 4. Press the ENTERE button. 5. Select Close by pressing the d and u buttons sequentially. To reset the picture position, press Reset.
●● HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720) ●● Settings can be adjusted and stored for each external device you have connected to an input on the TV.
❑❑ Changing the Picture Options ■■ Advanced Settings OO MENUm → Picture → Advanced Settings → ENTERE Black Tone (Advanced Settings are available in Standard / Movie mode) ◀ Advanced Settings You can adjust the detailed setting for the screen including colour and contrast. NN When connecting a PC, you can only make changes to Gamma and White Balance.
●● Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth. ●● Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast. ●● Shadow Detail (-2~+2) for LED TV : Increase the brightness of dark images. ●● Gamma: Adjust the primary colour intensity. ●● Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern ◀ function, the picture can be calibrated without a generator or filter.
●● RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation. ●● Colour Space (Auto / Native / Custom): Adjust the range of colours available to create the image. NN To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom. ●● White Balance: Adjust the colour temperature for a more natural picture. ◀ R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.
●● 10p White Balance (Off / On): Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness. NN Available when the picture mode is set to Movie and when the external input is set to all input. NN Some external devices may not support this function. Interval: Select interval to adjust. Red: Adjust the red level. ◀ ▶ Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default settings.
●● Flesh Tone: Emphasize pink “Flesh Tone.” ●● Edge Enhancement (Off / On): Emphasize object boundaries. ●● Motion Lighting (Off / On) : Reduce power consumption by brightness control. NN Motion Lighting is available in Standard / Movie mode. NN When changing a setting value of Backlight for LED TV / Cell Light for PDP TV, Brightness or Contrast, Motion Lightning will be set to Off. ◀ NN 3D is not supported.
●● xvYCC (Off / On): Setting the xvYCC mode on increases detail and colour space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks. NN Available when the picture mode is set to Movie and when the external input is set to HDMI or Component. NN Some external devices may not support this function. ●● LED Motion Plus (Off / On) for LED TV : Removes drag from fast scenes with a ◀ lot of movement to provide a clear picture.
■■ Picture Options OO MENUm → Picture → Picture Options → ENTERE NN When connecting a PC, you can only make changes to the Colour Tone. Colour Tone ●● Colour Tone (Cool / Standard / Warm1 / Warm2) NN Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.
●● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation / Demo): When the broadcast signal is weak, some static and ghosting may appear. Select one of the options until the best picture is displayed. Auto Visualisation: When changing analogue channels, displays the intensity of the current signal and defines the screen noise filter. NN Only available for analogue channels.
●● MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality. ●● HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth. NN Available only in HDMI mode (RGB signals). ●● Film Mode (Off / Auto1 / Auto2 / Cinema Smooth for PDP TV ): Sets the TV to ◀ automatically sense and process film signals from all sources and adjust the picture for optimum quality.
●● Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo) for LED TV : Removes drag from fast scenes with a lot of movement to provide a clearer picture. NN The Info screen on your TV displays the resolution and frequency of the incoming signal (60Hz), but not the frequency the TV is generating for the image it is displaying by using Motion Plus function. NN If noise occurs on the screen, please set up the Motion Plus to Off.
Blur Reduction: Adjusts the blur reduction level from video sources. Judder Reduction: Adjusts the judder reduction level from video sources when playing films. Reset: Reset the custom settings. ■■ Reset Picture (Yes / No) Resets your current picture mode to its default settings.
❑❑ Setting up the TV with Your PC Set the input source to PC. ■■ Auto Adjustment t OO MENUm → Picture → Auto Adjustment → ENTERE Adjust frequency values/positions and fine tune the settings automatically. NN Not available when connecting with an HDMI to DVI cable.
■■ PC Screen Adjustment OO MENUm → Picture → Screen Adjustment → PC Screen Adjustment → ENTERE ●● Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen. ◀ ●● Position: Adjust the PC screen position with direction button (u / d / l / r).
Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Click on “Control Panel” on the Windows start menu. ◀ 2. Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-box will appear. 3.
4. Navigate to the “Settings” tab on the display dialog-box. ●● The correct size setting (resolution) [Optimum: 1920 X 1080 pixels] ●● If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
❑❑ Changing the Preset Sound Mode OO MENUm → Sound → Sound Mode → ENTERE ■■ Sound Mode t ●● Standard: Selects the normal sound mode. ●● Music: Emphasizes music over voices. ●● Movie: Provides the best sound for movies. ◀ ●● Clear Voice: Emphasizes voices over other sounds. ●● Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. NN If Speaker Select is set to External Speaker, Sound Mode is disabled.
❑❑ Adjusting Sound Settings OO MENUm → Sound → ENTERE ■■ Sound Effect ●● SRS TruSurround HD (Off / On) t (standard sound mode only) ◀ This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology. NN If Speaker Select is set to External Speaker, SRS TruSurround HD is disabled.
●● SRS TruDialog (Off / On) (standard sound mode only) This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly. ●● SRS CS Headphone: You can hear virtual 5.1ch surround sound over the headphones. ●● Equalizer ◀ Adjusts the sound mode (standard sound mode only). –– Balance L/R: Adjusts the balance between the right and left speaker.
■■ 3D Audio (Off / Low / Medium / High) 3D audio technology provides the immersive sound corresponding to the pop-up effect of 3D video by audio depth control in perspective. NN Available in only when watching 3D image. ■■ SPDIF Output SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. ◀ ●● Audio Format: You can select the Digital Audio output (SPDIF) format.
■■ Speaker Settings ●● Speaker Select (External Speaker / TV Speaker) A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker. NN When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited. ◀ NN When Speaker Select is set to External Speaker. ●● TV Speaker: Off, External Speaker: On NN When Speaker Select is set to TV Speaker.
●● Auto Volume (Off / Normal / Night) To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. ■■ Reset Sound (Yes / No) Reset all sound settings to the factory defaults.
❑❑ Selecting the Sound Mode t When you set to Dual f-g, the current sound mode is displayed on the screen.
NN If the stereo signal is weak and an automatic switching occurs, then switch to the mono. NN Only activated in stereo sound signal. NN Only available when the Input source is set to TV.
Preference Features ❑❑ Setting the Network ■■ Connecting to a Wired Network You can attach your TV to your LAN using cable in three ways: ●● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable. See the diagram below.
●● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use LAN cable for the connection. See the diagram below.
●● Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.
●● If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks. ◀ Some networks require a Static IP address.
■■ Network Settings OO MENUm → Network → Network Settings → ENTERE Set the network connection to use various Internet services such as SMART HUB, AllShare and perform software upgrade. ■■ Network Status OO MENUm → Network → Network Status → ENTERE ◀ You can check the current network and Internet status.
■■ AllShare Settings OO MENUm → Network → AllShare Settings → ENTERE Selects whether to use media functions on the network. ■■ SWL(Samsung Wireless Link) OO MENUm → Network → SWL(Samsung Wireless Link) → ENTERE ◀ You can connect TV to wireless mobile device easily. For details on set up options, refer to the “Wired Network Settings” instructions.
■■ Network Setup (Auto) Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps: How to set up automatically 1. Go to Network Settings screen. To enter it, follow the directions of Network Settings. ◀ 2. Select the Wired. Network Setting Select a network connection type. Wired Wireless (general) WPS(PBC) 3. The network test screen appears, and network setting is done.
NN If it fails to set automatically, check the connection of LAN port. Network Setting Wiress network and Internet connection completed. MAC Address00:12:fb:2b:56:4d NN If you cannot find network connection values or if you want to set connection manually, set it to Manual. Refer to following “How to set up manually”. ◀ IP Address192.168.11.4 Subnet Mask255.255.255.0 Gareway 192.168.11.1 SEC_LinkShare DNS Server192.168.11.1 Retry IP Setting Internet is connected successfully.
■■ Network Settings (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. ◀ 2. In the pop-up menu that appears, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button.
How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 2 in the “How to set up automatically” procedure. 2. Select the IP Setting on network test screen. IP Settings IP Mode Manual IP Address Subnet Mask Gateway 0.0.0.0 0.0.0.0 0.0.0.0 3. Set IP Mode to Manual. ◀ 4. Press the d button on your remote to go to the IP Address. DNS Mode Auto DNS Server 0.0.0.0 OK ● The displayed image may differ depending on the model.
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7. The network test screen appears, and network setting is done.
■■ Connecting to a Wireless Network for LED 7000 Series NN This function may not be supported depending on the region. To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN - Sold Separately), which you connect to your TV’s back or side panel USB port See the illustration below.
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a IEEE 802.11b/g connection, the video may not play smoothly. NN NOTE ●● You must use the “Samsung Wireless LAN adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless network.
●● To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. ●● Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure.
●● If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your wireless router Samsung TVs will not support a connection in compliance with new WiFi certification specifications. ●● If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
●● Connection Methods: You can setup the wireless network connection on five ways. –– Auto Setup (Using the Auto Network Search function) –– Manual Setup –– PBC (WPS) –– One Foot Connection –– Plug & Access ◀ ●● The Samsung Wireless LAN adapter may not be recognized when using a connection via a USB hub or via a USB extension cable other than the cable supplied.
■■ Connecting to a Wireless Network You can connect your TV to your LAN through a standard wireless router or modem.
Samsung Wireless LAN adapter supports the IEEE 802.11a/b/g and ncommunication protocols. Samsung recommends using IEEE 802.11n. When you play video over a IEEE 802.11b/g connection, the video may not play smoothly. NN NOTE ●● To use a wireless network, your TV must be connected to a wireless IP ◀ sharer (either a router or a modem). If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
●● If you apply a security system other than the systems listed below, it will not work with the TV. ●● If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.
●● Ensure the TV is turned on before you connect the Samsung Wireless LAN a dapter. ●● Connection Methods: You can setup the wireless network connection on six ways.
■■ Network Setup (Auto) Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network.
How to set up automatically 1. Go to Network Settings screen. To enter it, follow the directions of Network Settings. ◀ Network Setting Select a network connection type. Wired 2. Select the Wireless(General). Wireless (general) 3. The Network function searches for available wireless networks. When done, it displays a list of the available networks. One Foot Connection WPS(PBC) Previous Set up wireless network by selecting your Wireless Router.
5. If the Security screen pop-up appears, go to step 6. If you select the wireless router which does not have security, go to step 10. 6. If the wireless router has security, enter the Security key(Security or PIN), then select Next. NN When you enter the Security key(Security or PIN), use u / d / l / r buttons on your remote to select number/ characters. ◀ NN You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem.
7. The network connection screen appears, and network setting is done. NN If it fails to set Security key(Security or PIN), select Reset or IP Settings. NN If you want to set connection manually, select the IP Settings. Refer to following “How to set up manually”.
■■ Network Setup (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. ◀ 2. In the pop-up menu that appears, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button.
How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 2 in the “How to set up automatically” procedure. 2. Select the IP Settings on network test screen. 3. Set IP Mode to Manual. ◀ 4. Press the d button on your remote to go to the first entry field. English IP Settings IP Mode Manual IP Address Subnet Mask Gateway 0.0.0.0 0.0.0.0 0.0.0.0 DNS Mode Auto DNS Server 0.0.0.
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7. The network connection screen appears, and network setting is done.
■■ Network Setup (WPS(PBC)) How to set up using WPS(PBC) If your router has a WPS(PBC) button, follow these steps: 1. Go to Network Settings screen. To enter it, follow the directions of Network Settings. Network Setting Select a network connection type. Wired Wireless (general) WPS(PBC) One Foot Connection Previous Connect to the Wireless Router easily by pressing the WPS(PBC) Next button. Choose this if your Wireless Router supports Push Cancel Button Configuration(PBC). 2. Select the WPS(PBC).
■■ Network Settings (One Foot Connection) The One Foot Connection make you easy to connect samsung TV and samsung wireless router by placing samsung wireless router within 1 foot(25cm) from samsung TV. If your wireless router does not support One Foot Connection, you must connect using one of the other methods. NN You can check for equipment that supports One Foot Connection on www. samsung.com.
How to set up using One Foot Connection Turn on the power of wireless router and TV. 1. Go to Network Settings screen. To enter it, follow the directions of Network Settings. Network Setting Select a network connection type. Wired Wireless (general) WPS(PBC) 2. Select the One Foot Connection. One Foot Connection Previous Connect to wireless network automatically if your Wireless Next Router supports One Foot Connection.
NN If One Foot Connection does not connect your TV to your AP, a pop-up window appears on the screen notifying you of the failure. If you want to try using One Foot Connection again, reset the wireless router disconnect the Samsung Wireless LAN adapter and then try again from Step 1. You can also choose one of the other connection setup methods. 4. The network connection screen appears, and network setting is done. 5. Place the wireless router in a desired location.
■■ SWL(Samsung Wireless Link) This function lets you connect a Samsung device that supports the WPS(PBC) to your TV. You can connect devices to the TV even if a sharer is not connected to the TV. NN For the TV to use SMART HUB, the AP (access point) must be connected to the wireless network. NN If a Samsung Wireless LAN Adapter is connected to the USB 2 port, the ◀ network may not operate normally. We recommend connecting it to the USB 1 (HDD) port. NN Only sharers using the 2.4 Ghz band are supported.
■■ Connect SWL You can directly connect a device that supports the WPS(PBC) to the TV. NN This function is available when SWL(Samsung Wireless Link) is set to On. NN To use the SWL (Samsung Wireless Link) function, connect the Samsung Wireless LAN Adpater to the USB 1 (HDD) port. How to connect Samsung Wireless Link ◀ For the procedures to establish a connection, refer to the following: 1. Connect your TV to Samsung Wireless LAN Adapter as described in the previous section.
2. Turn on your TV, press the MENU button on your remote, use the u or d button to select Network, and then press the ENTERE button. 3. Use the u or d button to select SWL (Samsung Wireless Link), and then press the ENTERE button. 4. Select SWL(Samsung Wireless Link) and press the ENTERE button to turn it On. 5. Select Connect SWL by using the d button and press the ENTERE button.
6. If the “Press the WPS(PBC) button on the device that supports WPC(PBC) within 120 secounds.” message appears, press the PBC button on the device to connect. NN For more information, refer to the wireless network setup manual of the device to be connected. 7. If the device is connected properly to the TV after starting count on message box then message box will be disappeared automatically. ◀ NN If the connection fails, please retry after 2 minutes.
If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.
❑❑ Setting the Time OO MENUm → System → Time → ENTERE ■■ Time ●● Clock Set: Set the Date and Time. Setting the clock is for using various timer features of the TV. OO The current time will appear every time you press the INFO button. ◀ NN If you disconnect the power cord, you have to set the clock again. –– You can set the Date and Time directly by pressing the number buttons on the remote control.
Using the Sleep Timer OO MENUm → System → Time → ENTERE ●● Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). NN To cancel Sleep Timer, select Off.
Setting the On / Off Timer O MENUm → System → Time → ENTERE ● On Timer 1 / On Timer 2 / On Timer 3: Three different on timer settings can be made. You must set the clock first. ◀ Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. N The c mark indicates the days you've selected.
Time: Set the hour and minute. Volume: Set the desired volume level. Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Channel (when the Source is set to TV): Select the desired channel. ◀ Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically.
NN NOTE ●● If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly. ●● When there is only one photo file in the USB, the Slide Show will not play. ●● If a folder name is too long, the folder cannot be selected.Each USB you ◀ use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.
● Off Timer 1 / Off Timer 2 / Off Timer 3: Three different off timer settings can be made. You must set the clock first. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. ◀ Off Timer 1 Setup Sun English Mon Tue Wed Time Thu Fri Sat 12:00 Close ● The displayed image may differ depending on the model. N The c mark indicates the days you've selected.
❑❑ Locking Programme OO MENUm → System → ENTERE ■■ Security The PIN input screen appears before the setup screen. ●● Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option. ◀ ●● Channel Lock (Off / On): Lock channels in Channel menu, to prevent unauthorized users, such as children, from watching unsuitable programme. NN Available only when the Input source is set to TV.
●● Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Re-enter the same 4 digits in Confirm New PIN. When the Confirm screen disappears, press the Close button. The TV has memorised your new PIN. NN If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
❑❑ Economical Solutions ■■ Eco Solution OO MENUm → System → Eco Solution → ENTERE ●● Energy Saving (Off / Low / Medium / High / Picture Off) t: This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.
●● Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room. NN If you adjust the Backlight for LED TV , Cell Light for PDP TV the Eco Sensor will be set to Off. Min cell Light for PDP TV : When Eco sensor is On, the minimum screen brightness can be adjusted manually. Min Backlight for LED TV , NN If Eco Sensor is On, the display brightness may change (become slightly ◀ darker or brighter) depending on the surrounding light intensity.
●● No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it’s not receiving a signal. NN Disabled when the PC is in power saving mode. ●● Auto Power Off (Off / On): The TV will be automatically turned off after 4 hours of being left idle to prevent overheating.
❑❑ Other Features OO MENUm → System → ENTERE ■■ Menu Language Set the menu language. 1. Select Menu Language and press the ENTERE button. 2. Choose desired language and press the ENTERE button. ◀ ■■ Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours) for LED TV If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
■■ Screen Burn Protection for PDP TV To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to programme the time between movement of the picture in minutes. ●● Pixel Shift (Off / On): Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen.
NN The Pixel Shift value may differ depending on the monitor size (inches) and mode. NN This function is not available in the Screen Fit mode. ●● Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
NN The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again. NN Press any key on the remote control to cancel this feature. ●● Side Gray (Light / Dark): When you watch TV with the screen ratio set to 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides.
■■ General ●● Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode. NN NOTE ●● Precautions and limitations for game mode –– To disconnect the game console and connect another external ◀ device, set Game Mode to Off in the setup menu. –– If you display the TV menu in Game Mode, the screen shakes slightly.
●● Game Mode is not available when the input source is set to TV or PC. ●● After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality. ●● If Game Mode is On: –– Picture Mode is set to Standard and Sound Mode is set to Movie.
●● BD Wise (Off / On): Provides the optimal picture quality for Samsung DVD, Blu- ray and Home Theatre products which support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution. NN Available when connecting Samsung products that support BD Wise through a HDMI cable.
●● Light Effect (Off / In Standby / Watching TV / Always) for LED 8000 : You can turn the LED on/off on the front of TV. Turn it off to save power or if the LED is too bright for you. NN Set the Light Effect to Off to reduce the power consumption. NN The colour of light may very depending on the model. ●● Boot Logo (Off / On): Display Samsung logo when the TV is turned on. ●● TV Name: Sets the TV name so you can find it easily on a mobile device.
■■ DivX® Video On Demand Shows the registration code authorized for the TV. If you connect to the DivX web site and register, you can download the VOD registration file. If you play the VOD registration using My Contents, the registration is completed. NN For more information on DivX® VOD, visit “http://vod.divx.com”. ■■ Network Remote Control (On / Off) ◀ Turn on/off or give permission to Samsung mobile phones devices. You must have a Samsung Mobile phone/device which supports Wireless Remote Control.
❑❑ Picture In Picture (PIP) OO MENUm → System → PIP → ENTERE ■■ PIP t You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode. NN NOTE ◀ ●● When Double (à, Œ) mode has been set in PIP, the Picture Size cannot be set. ●● For PIP sound, refer to the Sound Select instructions. ●● If you turn the TV off while watching in PIP mode, the PIP window will disappear.
●● You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. ●● While SMART HUB are in operation, the PIP function cannot be used. ●● The PIP function is not available in 3D mode.
●● PIP (Off / On): Activate or deactivate the PIP function. ●● Source (TV / AV for PDP TV / AV1, 2 for LED TV): You can select a source of the sub-picture. ●● Channel: Select the channel for the sub-screen. ●● Size (õ / ã / à / Œ): Select a size for the sub-picture. ●● Position (ã / – / — / œ): Select a position for the sub-picture. ◀ NN In Double (Œ, à) mode, Position cannot be selected. ●● Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode.
❑❑ Support Menu OO MENUm → Support → ENTERE ■■ e-Manual You can read the introduction and instructions about the TV features stored in your TV. NN For the detailed information about e-Manual Screen, refer to “How to view the e-Manual” in User Manual. ◀ ▶ ■■ Self Diagnosis NN Self Diagnosis might take few seconds, this is part of the normal operation of the TV. ●● Picture Test (Yes / No): Use to check for picture problems.
●● Sound Test (Yes / No): Use the built-in melody sound to check for sound problems. NN If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu. NN The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button. ●● Troubleshooting: If the TV seems to have a problem, refer to this description.
■■ Software Upgrade Software Upgrade can be performed via a broadcasting signal or by network connection or downloading the latest firmware from “www.samsung.com,” to a USB memory device.
Installing the Latest Version ●● By USB: Insert a USB drive containing the ◀ TV Rear Panel firmware upgrade file, downloaded from “www.samsung.com,” into the TV. Please be careful not to disconnect the power or USB remove the USB drive until upgrades are displayed image may differ depending on the completed. The TV will be turned off and on ●● The model. automatically after completing the firmware upgrade.
●● By Online: Upgrade the software using the Internet. NN First, configure your network. For detailed procedures on using the Network Setup, refer to the “Network Connection” instructions. NN If the internet connection doesn’t operate properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.
●● Alternative Software (backup): If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version. NN If the software was changed, existing software is displayed. ●● Standby Mode Upgrade (Off / On): If you select On, the TV will automatically download new upgrade software when it is in Standby mode with the power off. If it downloads new upgrade software, the TV will ask you if you want to install it when you turn the TV on.
Advanced Features ❑❑ Using the 3D function OO MENUm → Picture → 3D → ENTERE ■■ 3D ◀ This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses (SSG3100GB, SSG-3300GR, SSG-3300CR, SSG-3700CR) to view 3D video. Samsung 3D Active Glasses are sold separately. For more detailed purchasing information, contact the retailer where you purchased this TV.
❑❑ Viewing TV using the 3D function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the TV’s 3D function. [[ WARNING ●● Some viewers may experience discomfort while viewing 3D TV such as ◀ dizziness, nausea and headaches. If you experience any such symptom, stop viewing 3D TV, remove 3D Active Glasses and rest. ●● Watching 3D images for an extended period of time may cause eye strain.
●● A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest. ●● Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.) ●● Do not use the 3D function or 3D Active Glasses while walking or moving around.
●● 3D Mode: Select the 3D input format. NN If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 3D Mode from the list below that provides the best 3D viewing experience. NN When watching 3D images, turn on 3D Active Glasses. ◀ 3D Mode Operation 3D Off Turns the 3D function off. 2D → 3D Changes a 2D image to 3D. Side by Side Displays two images next to each other. Top & Bottom Displays one image above another.
●● 3D Effect for LED TV : Adjust 3D effects like perspective and depth for your preferred 3D viewing experience. ●● 3D Effect (Auto / Manual) –– Auto: Automatically adjust the perspective and depth settings in accordance with the 3D input source. –– Manual: Manually adjust the perspective and depth settings. ●● 3D Perspective (-5 ~ +5): Adjust overall 3D perspective of on-screen image. ◀ ●● Depth (0~10): Adjust overall depth. ●● L/R Change (L/R Image / R/L Image): Swap the left and right pictures.
●● 3D → 2D (Off / On): Displays the image for the left eye only. NN This function is deactivated when 3D Mode set to “2D → 3D” or Off. ●● 3D Auto View (Off / Message Alert / On): If 3D Auto View is set to On, a “Side by Side” format HDMI signal with one of the resolutions below is automatically switched to 3D. Here, correct 3D information must be sent from the Standard HDMI 3D Format. ◀ If you set 3D Auto View to Message Notice, a pop up message window appears when the TV receives a 3D signal.
3D Auto View is available when the resolution is 720p, 1080i and 1080p in DTV and HDMI mode. NN If a 3D failure occurs due to a 3D information error, set 3D Auto View to Off and manually select a 3D Mode using the 3D button or corresponding menu. ●● 3D Optimisation: The overall adjustment of 3D effect. NN This function is deactivated when 3D Mode set to “2D → 3D” or Off.
NN Support resolution (16:9 only) ◀ Resolution Frequency (Hz) 1280 x 720p 25 / 50 Hz 1920 x 1080i 25 / 50 Hz 1920 x 1080p 24 / 30 / 50 / 60 Hz Resolution supported for HDMI PC mode The resolution for HDMI PC mode is optimized to 1920 x 1080 input. An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode.
How to watch the 3D image ●● Method 1 NN Some 3D modes may not be available depending on the format of the image source. NN To watch in 3D, wear 3D Active Glasses and press the power button on the glasses. ◀ 1. Press the MENU button on your remote, use the u or d button to select Picture, and then press the ENTERE button. 2. Use the u or d button to select 3D, and then press the ENTERE button.
3. Use the u or d button to select 3D Mode, and then press the ENTERE button. 4. Using the l or r buttons on your remote control, select the 3D Mode of the image you want to view. ◀ 3D Mode Close ●● The displayed image may differ depending on the model.
●● Method 2 1. Press the 3D button on your remote. and then you can view the 3D image. 2. If you want to change 3D options (such as 3D Effect), press the MENU button on your remote, and then select Picture. 3. Go to Step 2 in the “Method 1”, and follow the directions from that point on. NN To exit the 3D mode, press the 3D button on your remote again.
Supported formats and operating specifications for Standard HDMI 3D NN The 3D formats indicated below are recommended by the HDMI association and must be supported. Source signal format Standard HDMI 1.
The mode is automatically switched to 3D mode for the 3D video input in one of the formats above. For the Standard HDMI 3D format with 24Hz, the TV is optimized as follows: ●● Resolution First Display Mode: If Motion Plus is set to Off, Clear or Standard, you can watch the video at a high resolution optimized to the resolution of the source video. ●● Judder Reduction Display Mode: When Motion Plus is set to Smooth or ◀ Custom, you can watch a smooth picture without judder.
Before using 3D function... NN NOTE ●● 3D Mode is set to Off automatically when accessing Smart Hub or e-Manual functions. ●● 3D Mode is set to memorised configuration value automatically, when changing the input source. ●● Some Picture functions are disabled in 3D mode. ◀ ●● PIP is not supported in 3D mode.
●● 3D Active Glasses from Samsung’s previous product (IR type) or other manufacturers not be supported. ●● When the TV is initially powered on, may take some time until the 3D display is optimized. ●● The 3D Active Glasses may not work properly if there is any other 3D ◀ product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses.
●● Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures. Otherwise, you may not be able to enjoy proper 3D effects. ●● The ideal viewing distance should be three times or more the height of the screen. We recommend sitting with viewer’s eyes on a level with the screen.
❑❑ Getting Started with Smart Hub NN Some functions may not be supported depending on the country. Features Search All Social TV Easily search and access content from diverse sources (e.g. applications, Your Video, AllShare). Share your TV viewing experience with your friends via social networking service (SNS). ◀ ▶ Your Video Web Browser Enjoy your movie watching with a customized video on demand (VOD) recommendation service. Access the web and watch TV at the same time.
SMART HUB brings useful and entertaining contents and services directly from the web to your TV. The Gateway to all content integrated in one place ◀ ●● It’s all integrated to guide you to easier and diverse entertainment choices. Search Your Video Connect to the Internet and enjoy a variety of contents throuth Smart Hub. This feature may not be available in some countries. For some of the countries listed, local language characters might not be displayed properly.
Screen Display You can search for various types of content that can be used on your TV. Enter a keyword to search for media, various applications, or online information that you can use on the TV. Exit: Exits the SMART HUB. Search Your Movie Application service: You can experience various service provided by samsung. Connect to the Internet and enjoy a variety of contents throuth Smart Hub. This feature may not be available in some countries.
NN NOTE ●● Configure the network settings before using SMART HUB . For more information, refer to “Network Settings”. ●● Unsupported fonts within the provider’s content will not display normally. ●● Slow responses and/or interruptions may occur, depending on your network conditions. ●● Depending on the region, English may be the only language supported for ◀ application services. ●● This feature is not available in some locations.
●● If you experience a problem using a application, please contact the content provider. ●● According to circumstances of the contents provider, an application’s updates or the application itself may be discontinued. ●● Depending on your country’s regulations, some applications may have limited service or not be supported.
Starting Smart Hub the First Time To start Smart Hub for the first time, follow these steps : 1. Press the SMART HUB button. 2. The SMART HUB screen appears. In a few cases, the Country screen appears immediately after. 3. If the Country screen has appeared, press the u / d / l / r buttons to select your country, then press the ENTERE button. ◀ NN Certain applications are available only in certain countries. 4. The General Disclaimer screen appears.
5. The Internet Privacy Policy screen appears. Press the l / r buttons to select Agree, then press the ENTERE button. 6. The Service Update screen appears and installs a number of services and applications. When done, it closes. The applications and services downloaded are displayed on the SMART HUB screen. This may take some time. NN Smart Hub may close momentarily during the installation process. NN A number of screens may appear after installation.
Account Login For an application with multiple accounts, select ^ to access the different accounts. NN For a more enjoyable application experience, register and log in to your account. NN For instructions on creating an account, refer to “How to create an Smart TV ID”.
1. Press the Red button in the SMART HUB home page. 2. Select ^ by pressing the u / d / l / r button. The account list appears. NN If you want to create an account, select Create Account then the create account OSD window will appear. 3. Select the desired Smart TV ID, and the press the ENTERE button. 4. After selecting Smart TV ID, enter the Password using the remote control. NN When login succeeds, Smart TV ID will be displayed on the screen.
How to create a Smart TV ID Before creating a Smart TV ID, you should download the application first on the Samsung Apps. 1. Press the Red button. The Login screen appears. 2. Select Create Account. The Create Account screen will appear. 3. Press the ENTERE button to enter a new Smart TV ID. The Keypad screen will appear. ◀ 4. Using the keypad screen, enter a Smart TV ID. NN A Smart TV ID must be created in “sample@sample.com” form.
Using the Keypad Pressing the / button on the remote while you are using the Screen Keypad enables you to change the text fields to lower case, capitalized case, upper case, numbers and icons. You can use this Screen Keypad in a several SMART HUB applications. Method 1: Using keypad of ABC type. 4-1. For example, suppose that you want to input “105Chang”. ◀ 4-2. Press the / button on the remote 3 times to change the input mode from lower case to numbers. 4-3.
4-4. Press the / button on the remote 4 times to change the input mode from numbers to upper case. 4-5. Press the 2 button on the remote 3 times to input C. 4-6. Press the / button on the remote 3 times to change the input mode from upper case to lower case. 4-7. Press buttons on the remote to input the rest of “Chang”. When done, press the ENTERE button.
Method 2: Using the Keypad of T9 type. 4-1. For example, suppose that you want to input “105Chang” 4-2. Press the / button on the remote 3 times to change the input mode from lower case to numbers. 4-3. Press the 1, 0 and 5 button in numerical order. 4-4. Press the / button on the remote 4 times to change the input mode from numbers to upper case. ◀ 4-5. Press numbers in sequence: 2, 4, 2, 6, 4. A window will appear displaying a list of words that can be entered using the selected numbers.
5. Using the remote control, enter the Password. ●● Password must be 6~12 words. ●● You can delete the entered character using the PRE-CH button. ●● Using the � (REW) or µ (FF) button, you can select icon you want to enter in icon keypad screen. 6. ◀ Account created. You can use the services provided by all users of your Samsung TV with a single login by linking the users’ account to the TV ID. If you want to register a service site ID, select Yes. Service Site list will appear on the screen.
7. Select Register of the Service Site you want, then press the ENTERE button. 8. Using number buttons, enter your application site ID and password. Then press the ENTERE button. 9. Registered successfully. If you add another service site, select Yes. then press the ENTERE button, go to step 5. 10. When completed, select OK. Then press the ENTERE button.
❑ Setting up SMART HUB ■ Settings Configure SMART HUB settings from this screen. Press the } button to enter Settings. ● Account Management ◀ Settings Account Management Service Manager Reset Register Service Account: Register login information for service sites. Properties Close Change Password: Change account password. ● The displayed image may differ depending on the model. Remove From TV Account List: Delete an account from the list of accounts.
●● Service Manager Ticker Autorun (Off / Social TV): You can set Ticker Autorun to come on when powering on the TV. NN The Ticker function allows you to view content from the current input source and ticker data at the same time. NN Depending on your country, Ticker application may have a different service or not be supported. ◀ Channel Bound Service (Off / On): Some channels support applications as an Internet data service, allowing you to access the Internet service while watching TV.
●● Reset: Resets SMART HUB settings to factory default settings. If you want reset SMART HUB, Enter password. NN The default password set is “0-0-0-0.” NN If you forget the password you created, press the following sequence of remote control buttons to reset the password to “0-0-0-0”: POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).
●● Properties More: Display information about SMART HUB. Terms of Service Agreement: Display the Terms of Service Agreement.
❑❑ Using the SMART HUB service ■■ Samsung Apps Samsung Apps is a store for downloading applications to be used on Samsung TV/AV equipment. Users can enjoy a variety of contents such as videos, music, photos, games, useful information etc. using the downloaded applications. ◀ Additional applications will be available in the future.
NN Using the colour buttons with the What’s New? What’s New? Samsung Apps. Video Game ●● a Red (Login): To log in to the internet service. Sports Lifestyle ●● b Green (List View / Thumbnail View): To change the view mode.
Using the Samsung Apps by category The following categories are available: ●● What’s New?: Displays newly registered applications. ●● Video: Displays various video media such as movies, TV shows and short length videos. ●● Game: Displays various games such as sudoku and chess. ●● Sports: Displays various sports media such as match information, images and ◀ ▶ short length video.
●● Information: Includes various information services such as news, stocks and weather. ●● Other: Includes other miscellaneous services. ●● My Account: Displays the application list and your cyber cash balance. NN Starting in the middle of 2010 (US and Korea only), you can purchase cyber- cash for buying applications through tv.samsung.com. ●● Help: If you have questions about SMART HUB, check this section first.
[Legal Statement] Due to the various capabilities of products featuring the Samsung SMART HUB - Content Service, as well as limitations in the available content, certain features, applications, and services may not be available on all devices or in all territories. ◀ Some features on SMART HUB may also require additional peripheral devices or membership fees that are sold separately. Please visit http://www.samsung. com for more information on specific device information and content availability.
❑❑ Troubleshooting for SMART HUB ◀ Problem Possible Solution Some application contents only appear in English. How can I change the language? The Application content language may be different from the application user interface language. Some application services do not work. Check with the service provider. When a network error occurs, I can only use the setting menu.
■■ Web Browser 1. To open Web Browser, press the l / r / u / d buttons to select Web Browser, and then press the ENTERE button. The Web Browser may be displayed differently with PC. 2. The Web Browser is not compatible with a Java application. 3. When attempted to download a file, but the file could not be saved and an error message appeared. ◀ 4. Access may be blocked to some websites or to web browsers operated by certain businesses. 5. Playback of Flash video may be restricted. 6.
7. Scrolling a web page that allows only part (and not the whole) of the page to be scrolled may cause corrupted characters. 8. ActiveX is not supported. 9. Some options cannot be accessed in Tab mode. (To access such options, switch to Pointer mode.) 10. Some text may appear corrupted because the number of supported fonts is limited. ◀ 11. The response to a command on the remote or the screen display may be delayed temporarily if a web page is currently loading. 12.
13. Copy and Paste are not supported. 14. When writing emails or posting messages, some functions (Such as changing the size or colors.) may not be supported. 15. The number of bookmarks and logs that can be saved is limited. 16. The maximum number of windows that can open at the same time may vary depending on the browsing condition or TV model. 17. The web browsing speed depends on the network conditions. ◀ 18. PIP will automatically be deactivated if a video is played in the browser.
19. The Web Browser can play MP3 audio files only. 20. The function for importing or exporting bookmarks is compatible with bookmark files in a particular file format only. (Compatible format: Netscape-bookmarkfile-1) 21. When you import or export the bookmark, the folder tree is not included. 22. If you import the bookmark file to a Computer from a TV, the bookmark file will be saved in “Samsung SmartTV Bookmark” folder. ◀ 23.
24. Visited web site history is saved in chronological order and It will be removed from the list according to oldest page accessed. 25. Some video or audio content may not play during Flash playback depending on the video/audio codec supported. 26. A sudden change in the picture brightness inside the video window may affect the brightness of the surrounding stationary picture.
■■ Skype Skype created a little piece of software that makes communicating with people around the world easy and fun. With Skype you can say hello or share a laugh with anyone, anywhere. And if both of you are on Skype, it’s free. Communicate with people around the world! NN For more information, download the Skype ◀ user's manual from “www.samsung.com.” English ●● The displayed image may differ depending on the model.
All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider.
UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF THE DEVICE, OR ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
❑❑ About AllShare™ AllShare™ connects your TV and compatible Samsung mobile phones/ devices through a network. You can play media contents including videos, photos and music saved on your mobile phones or the other devices (such as your PC) by controlling them on the TV via the network. NN For more information, visit “www.samsung.com” or contact the Samsung call centre. Mobile devices may need additional software installation. For details, refer to each device’s user’s guide.
NN If your Samsung TV connects to a non-Samsung DLNA server, a compatibility issue may occur during video playback. NN By connecting your Samsung TV to a network via AllShare™, you can use Samsung’s original functions as follows: –– Playback of various video formats (DivX,XVID, MP4, 3GPP, AVI, ASF, MKV, etc.
❑❑ Setting Up AllShare™ OO MENU → Network → AllShare Settings → ENTERE ■■ AllShare Settings ●● Media (On / Off): Enables or disables the media function. When the media function is on, Media contents play can be controlled by a mobile phone or other devices that support DLNA DMC. AllShare Settings Media ◀ ▶ ●● The displayed image may differ depending on the model.
■■ Media Shows a list of mobile phones or connected devices which have been set up with this TV for using the Media function. NN The Media function is available in all devices which support DLNA DMC. ●● Allowed / Denied: Allows/Blocks the the devices. ●● Delete: Deletes the devices from the list. NN This function only deletes the name of the device from the list. If the deleted ◀ device is turned on or tries to connect to the TV, it may appear on the list again.
Using the Media Function An alarm window appears informing the user that the media contents (videos, photos, music) sent from a mobile phone will be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears. If you press the RETURN or EXIT button when the alarm window appears, the media contents are not played. NN NOTE ◀ ●● If the media function executes for the first time, the warning popup window appears.
●● To turn off the media contents transmission from the mobile phone, set Media to Off in the AllShare Settings. ●● Contents may not be played on your TV depending on their resolution and format. ●● The ENTERE and l / r buttons may not work depending on the type of media content. ●● Using the mobile device, you can control the media playing. For details, refer ◀ to each mobile’s user’s guide.
How to play a media content saved on the connected device 1. Press the MENU button on your remote, use the u or d button to select Network, and then press the ENTERE button. 2. Use the u or d button to select AllShare Settings in the Network menu, and then press the ENTERE button. 3. Use the u or d button to select Media, and then press the ENTERE button. ◀ 4. Set Media to On. 5. Specify the device containing the media content you want to play and select Allowed by using the u or d button.
6. Press the EXIT button to exit the menu, and then press the SMART HUB button. 7. Use the l or r button to select AllShare™, and then use the u or d button to select device. The Media Contents menu will open where you can play saved content on the selected device. 8. Select and play media content.
What is Anynet+? t Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. NN NOTE ●● You can only control Anynet+ devices using the TV remote control, not the ◀ buttons on the TV. ●● The TV remote control may not work under certain conditions.
For the method of connecting external devices , refer to the supported user manual. NN NOTE ●● Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre. ●● The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated when the TV is connected to an audio receiver that supports the ARC function. ◀ ●● When following the connection above, the Optical jack only outputs 2 channel audio.
●● You can connect only one Home Theatre. ●● You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions. ●● Anynet+ works when the AV device supporting Anynet+ is in the standby or on status. ●● Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu View TV Device List ◀ Description Changes Anynet+ mode to TV broadcast mode. Shows the Anynet+ device list. (device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. (device_name) TOOLS Shows the tools menu of the connected device. E.g.
❑❑ Setting Up Anynet+ OO MENUm → System → Anynet+ (HDMI-CEC) → ENTERE ■■ Anynet+ (HDMI-CEC) (Off / On) To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. NN When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
■■ Auto Turn Off (No / Yes) Setting an Anynet+ Device to turn off automatically when the TV is turned off. NN If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. NN May not be enabled depending on the device.
❑❑ Switching between Anynet+ Devices 1. Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the ENTERE button to select Device List. NN If you cannot find a device you want, select Refresh to refresh the list. 2. Select a device and press the ENTERE button. You can switch to the selected device. NN The Device List menu will only appear when you set Anynet+ (HDMI-CEC) ◀ to On in the System menu.
●● Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation. ●● If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.
❑❑ Listening through a Receiver You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. NN If your receiver supports audio only, it may not appear in the device list. NN The receiver will work when you have properly connected the optical in jack ◀ of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
NN When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver.
Using the ARC function You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. NN To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMI IN 2 (ARC) port. ◀ NN To disable the ARC function, set the Receiver to Off. Even if the TV transmits the ARC signal continuously, the receiver will be blocked from receiving the signal.
❑❑ Troubleshooting for Anynet+ Problem Anynet+ does not work. Possible Solution •• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. •• •• •• •• ◀ Only one receiver (home theatre) can be connected. Check if the Anynet+ device power cord is properly connected. Check the Anynet+ device’s Video/Audio/HDMI cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. •• Check whether the TV remote control is in TV mode.
I want to start Anynet+. •• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. •• Press the TOOLS button to display the Anynet+ menu and select a menu you want. I want to exit Anynet+. •• Select View TV in the Anynet+ menu. •• Press the SOURCE button on the TV remote control and select a non- Anynet+ device. ◀ The message “Connecting to Anynet+ device...” appears on the screen.
The connected device is not displayed. •• Check whether or not the device supports Anynet+ functions. •• Check whether or not the HDMI cable is properly connected. •• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. •• Search Anynet+ devices again. •• You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions.
❑❑ Using the Media Contents Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC) device. Search Your Video Connect to the Internet and enjoy a variety of contents throuth Smart Hub. This feature may not be available in some countries. 1. Press the SMART HUB button. For some of the countries listed, local language characters might not be displayed properly. 2. Press the d or u button to select desired menu (Videos, Photos, Music), then press the ENTERE button.
❑❑ Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing photo, music and movie files to the USB [1(HDD) or 2] port on the back or side panel of the TV. ◀ 3. When USB is connected to the TV, popup window appears. Then you can select Connected Device.
❑❑ Connecting to the PC through network You can play pictures, music and videos saved on your PC through a network connection in the AllShare mode. 1. For more information on how to configure your network, refer to “Setting the Network”. ●● You are recommended to locate both TV and PC in same subnet. The first ◀ 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address: 123.456.789.
2. Using a LAN cable, connect between the external modem and the PC onto which the AllShare PC Software will be installed. ●● You can connect the TV to the PC directly without connecting it through a Sharer (Router). NN Functions that are not supported when connecting to a PC through a network: ●● The BGM Mode and Background Music Setting functions. ●● Sorting files by preference in the Photos, Music and Videos folders. ◀ ●● The � (REW) or µ (FF) button while a movie is playing.
NN AllShare PC Software should be permitted by the firewall programme on your PC. NN When you use SMART HUB mode through a network connection, depending on the functions of the provided server: ●● The sorting method may vary. ●● The Scene Search function may not be supported. ●● The Resume, which resumes playing of a video, may not be supported. ◀ ●● The Resume function does not support multiple users. (It will have only memorised the point where the most recent user stopped playing.
NN You may experience file stuttering while playing a video in SMART HUB through a network connection. Before using My Contents functions... NN It might not work properly with unlicenced multimedia files. NN Need-to-Know List before using Media Contents ●● MTP (Media Transfer Protocol) is not supported. ◀ ●● The file system supports FAT16, FAT32 and NTFS. ●● Certain types of USB Digital camera and audio devices may not be compatible with this TV.
●● Media Contents only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port. ●● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
●● The maximum supported JPEG resolution is 15360X8640 pixels. ●● For unsupported or corrupted files, the “Not Supported File Format” message is displayed. ●● If the files are sorted by Folder View, up to 1000 files can be displayed in each folder. ●● MP3 files with DRM that have been downloaded from a non-free site cannot ◀ be played.
●● If more than 2 PTP devices are connected, you can only use one at a time. ●● If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported. ●● If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction.
●● If the TV has been no input during time set in Auto Protection Time, the Screensaver will run. ●● The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. ●● If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
Screen Display Move to the file you desired using the u / d / r / l buttons and then press the ENTERE or ∂ (Play) button. The file is played. Device name: Displays a connected device name. ◀ File List Section: You can confirm the files and groups that is sorted by each category.
■■ Videos Playing Video 1. Press the l / r / u / d button to select the desired file in the file list. 1:02:15 / 2:04:10 3/15 1:02:15 / 2:04:10 2. Press the ENTERE button or ∂ (Play) button. ◀ ●● The displayed image may differ depending on the model.
●● The selected file is displayed on the top with its playing time. ●● If video time information is unknown, play time and progress bar are not displayed. ●● During playing the video, you can search using the l and r button. ●● You can use � (REW) and µ (FF) buttons during playback.
NN In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. ●● Supported Subtitle Formats ◀ Name File extension Format MPEG-4 time-based text .txt XML SAMI .smi HTML SubRip .srt string-based SubViewer .sub string-based Micro DVD .sub or .
●● Supported Video Formats File Extension *.avi *.mkv Container AVI MKV ◀ *.asf *.wmv *.mp4 ASF ASF MP4 Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8 XviD 1920x1080 6 ~ 30 8 H.264 BP / MP / HP 1920x1080 6 ~ 30 25 MPEG4 SP / ASP 1920x1080 6 ~ 30 8 Motion JPEG 1920x1080 6 ~ 30 8 Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8 XviD 1920x1080 6 ~ 30 8 H.
File Extension *.3gp 3GPP *.vro VRO VOB *.mpg *.mpeg ◀ Container *.ts *.tp *.trp PS TS Video Codec Resolution Frame rate (fps) Bit rate (Mbps) H.264 BP / MP / HP 1920x1080 6 ~ 30 25 MPEG4 SP / ASP 1920x1080 6 ~ 30 8 MPEG1 352x288 24 / 25 / 30 30 MPEG2 1920x1080 24 / 25 / 30 30 MPEG1 352x288 24 / 25 / 30 30 MPEG2 1920x1080 24 / 25 / 30 30 H.264 1920x1080 6 ~ 30 25 MPEG2 1920x1080 24 / 25 / 30 30 H.
Other Restrictions NN NOTE ●● Video content will not play, or not play correctly, if there is an error in the content or the container. ●● Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above. ●● If the Index Table is in error, the Seek (Jump) function is not supported. ◀ ●● Video content can not be played, if there are many contents in one file.
Video Decoder Audio Decoder •• Supports up to H.264, Level 4.1 •• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. •• Supports up to WMA 7, 8, 9, STD •• WMA 9 PRO does not support 2 channel excess multi channel or lossless audio. •• XVID, MPEG4 SP, ASP: •• WMA sampling rate 22050Hz mono is not supported. −− Below 1280 x 720: 60 frame max −− Above 1280 x 720: 30 frame max •• GMC 2 over is not supported.
Playing movie file continuously (Resume Play) If you exit the playing Videos function, it can be played later from the point where it was stopped. NN The Resume function does not support multiple users. (It will have only memorised the point where the most recent user stopped playing.) 1. Select the movie file you want to play continuously by pressing the l or r button to select it from the file list section. ◀ 2. Press the � (Play) / ENTERE button.
Using the Scene Search function If you want to use the Scene Search function during playback, you can explore scene divided in to 5 chapters you want. NN If the index information is damaged or Scene Search unsupported, you will not be able to use the Scene Search function. 00:12:20 00:24:40 00:36:59 00:49:18 00:08:18 ●● The displayed image may differ depending on the model.
1. Select the movie file you want to play from the file list section. 2. Press the � (play) or ENTERE button. 3. Press the TOOLS button, and then press the l or r button to select Scene Search. A pop up window appears. 4. Press the l or r button to select a scene you want search. The playback will start from the selected scene.
■■ Music Playing Music 1. Press the l / r / u / d button to select the desired music file in the file list. 2. Press the ENTERE button or � (Play) button. ◀ ●● During playing the music, you can search using the � (REW) and µ (FF) button. English Playlist I Love You Ming Music_1 No Singer Musi Music_2 usiic_2 c_ No Sing Sing ge ger Musiic_3 c No Singe Singe ngerr nge Love R&B 2011-01-01 tag 1.
NN Only displays the files with MP3 extension. Other file extensions are not displayed, even if they are saved on the same USB device. NN If the sound is abnormal when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.
Creating My Playlist 1. On the Music screen in the SMART HUB menu, press the l / r / u / d button to select Edit Mode, and then press the ENTERE button. 2. Press the l / r / u / d button to select the tracks you want to add and press the ENTERE button. NN The check box appears to the left of the selected files. NN To select all the files in the current page, select Select All in this page at the ◀ top. 3.
4. Press the ENTERE button. The message “Selected items added to My Playlist” is displayed. 5. The newly created or updated playlist will be in the main Music page. Playing My Playlist Select the My Playlist folder and it will play automatically. Press the u or d button to select a different music file within the play list. ◀ NN To delete a file from My Playlist, select the recycle bin icon next to the file you want to delete by using the direction buttons.
Playing the selected music files 1. On the Music screen in the SMART HUB menu, press the l / r / u / d button to select Edit Mode, and then press the ENTERE button. 2. Press the l / r / u / d button to select the desired music file in the file list, and then ENTERE button.
NN NOTE ●● The check box mark appears to the left of the selected files. ●● To select all the files in the current page, select Select All in this page at the top. ●● To cancel a selection, press the ENTERE button again. 3. Press the l / r / u / d button to select Play. The selected music files will be play.
■■ Photos Viewing a Photo (or Slide Show) Normal Friends.jpg 1024 X 768 2011/01/03 1. Press the l / r / u / d button to select the desired file in the file list. 2. Press the ENTERE button. ●● When you press the � (Play) button ◀ in the file list, slide show will be started immediately. English ●● The displayed image may differ depending on the model.
●● All files in the file list section will be displayed in the slide show. ●● During the slide show, files are displayed in order from currently being shown. NN Music files can be automatically played during the slide show if the Background Music is set to On. NN The BGM Mode cannot be changed until the BGM has finished loading.
❑❑ Media Contents - Additional Function Sorting the file list Sorting by using the l / r / u / d To sort files in the file list, select the button. And then press the ENTERE button. Category ◀ Operations Videos Music Photos Folder View Displays the whole folder. You can view the file name and thumbnail by selecting the folder. > > > Title Sorts and displays the file title in Symbol/Number/ Alphabet/Special order. > > > Latest Date Sorts and shows files by the latest date.
Category Operations Videos Music Earliest Date Sorts and shows files by the earliest date. Artist Sorts the music file by artist in alphabetical order. > Album Sorts the music file by album in alphabetical order. > Genre Sorts music files by the genre. > Monthly Sorts and shows photo files by month.
Videos / Music / Photos Play Option menu The following functions are enabled during playback. Category ◀ Operations List Return to the file list. Previous / Next Go to previous / next photo file. Shuffle You can play the music sequentially or randomly. Resume A movie file will begin to play from where it was stopped.
Category ◀ Operations Videos Scene Search You can search scene divided into 5 chapters you want. > Title Search You can move directly to another Title. > Time Search You can search the movie using l and r buttons at intervals of 1 minute. > Subtitle You can view a subtitle. You can select a specific language if the subtitle file contains multiple languages. > Repeat Mode You can play movie and music files repeatedly.
Category ◀ Operations Videos Picture Size You can adjust the picture size to your preference. > Picture Mode You can change the Picture Mode. > Sound Mode You can change the Sound Mode. > Subtitle Setting Displays the Subtitle Setting. You can set up a subtitle option. > Play / Pause You can start or stop a slide show. Alternatively, the � (Play) or � (Pause) button on the remote can be used.
Category Operations Videos Music Photos Start Slide Show / Stop Slide Show You can start or stop a slide show. > Slide Show Speed You can select the slide show speed during the slide show. Alternatively, the � (Rew) or µ (FF) button on the remote can be used. > Slide Show Effect You can set various slide show effects. > Background Music On You can start or stop a background music.
Category Operations Videos Music Photos Background Music Setting You can set and select background music when watching a photo file or slide show. > Zoom You can zoom into images in full screen mode. > Rotate You can rotate images. > NN Pressing the INFO button while a device name is selected will display ◀ information about the selected device name. NN Pressing the INFO button while a file is selected will display information about the selected file.
Other Information ❑❑ Troubleshooting If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www. samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual. ◀ Issues Solutions and Explanations Picture Quality First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.
Issues Solutions and Explanations The TV image does not look as good as it did in the store. •• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality. •• Cable/Satellite subscribers: Try HD stations from the channel line up. •• Antenna connection: Try HD stations after performing Auto programme. NN Many HD channels are up scaled from SD(Standard Definition) contents.
Issues Solutions and Explanations The picture is distorted: macro block error, small block, dots, pixelization •• Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies. •• Low signal level or bad quality can cause picture distortion. This is not a TV issue. •• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV. Colour is wrong or missing.
Issues Solutions and Explanations There is poor colour or brightness. •• Adjust the Picture options in the TV menu (go to Picture Mode / Colour / Brightness / Sharpness) •• Adjust Energy Saving option in the TV menu (go to MENU – System – Eco Solution – Energy Saving) •• Try resetting the picture to view the default picture settings (go to MENU - Picture - Picture Reset) There is a dotted line on the edge of the screen. ◀ The picture is black and white.
Issues Solutions and Explanations When changing channels, the picture freezes or is distorted or delayed. •• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes. •• Set the output resolution of the cable box to 1080i or 720p. Sound Quality First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
Issues Solutions and Explanations The picture is good but there is no sound. •• Set the Speaker Select option to TV Speaker in the sound menu. •• If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV. •• If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
Issues Solutions and Explanations The speakers are making an inappropriate noise. •• Check the cable connections. Make sure a video cable is not connected to an audio input. •• For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion. No Picture, No Video The TV won’t turn on. •• Make sure the AC power cord is securely plugged in to the wall outlet and the TV. ◀ •• Make sure the wall outlet is working.
Issues Solutions and Explanations The TV turns off automatically. •• Ensure the Sleep Timer is set to Off in the Setup menu. •• If your PC is connected to the TV, check your PC power settings. •• Make sure the AC power cord is plugged in securely to the wall outlet and the TV. •• When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal. There is no picture/Video.
Issues Solutions and Explanations RF(Cable/Antenna) Connection The TV is not receiving all channels. •• Make sure the Antenna cable is connected securely. •• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU - Setup - Plug & Play (Initial setup) and wait for all available channels to be stored. ◀ The picture is distorted: macro block error, small block, dots, pixelization. •• Verify the Antenna is positioned correctly.
Issues Solutions and Explanations “PC” is always shown on the source list, even if a PC is not connected. •• This is normal; “PC” is always shown on the source list, regardless of The video is OK but there is no audio. •• If you are using an HDMI connection, check the audio output setting on whether a PC is connected. your PC. Network Connection The wireless network connection failed. •• The Samsung Wireless USB dongle is required to use a wireless network.
Issues Solutions and Explanations Image Retention (Burn In) Issue. for PDP TV •• To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology. •• Pixel Shift technology enables you to set picture movement up / down (Vertical Line) and side to side (Horizontal Dot). The picture won’t display in full screen. •• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
Issues Solutions and Explanations The remote control does not work. •• Replace the remote control batteries with the poles (+/–) in the right The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume. ◀ direction. •• Clean the sensor’s transmission window on the remote. •• Try pointing the remote directly at the TV from 5~6 feet away. •• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code.
Issues Solutions and Explanations The TV is tilted to the side. •• Remove the base stand from the TV and reassemble it. •• Make sure the TV is placed on a flat surface. It is necessary to use There are difficulties assembling the stand base. The channel menu is greyed out. (unavailable) magnetized screw driver if you cannot remove the screws from the TV •• The Channel menu is only available when the TV source is selected.
◀ Issues Solutions and Explanations Your settings are lost after 30 minutes or every time the TV is turned off. •• If the TV is in the Store Demo mode, it will reset audio and picture You have intermittent loss of audio or video. •• Check the cable connections and reconnect them. •• Loss of audio or video can be caused by using overly rigid or thick settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.
Issues Solutions and Explanations You see small particles when you look closely at the edge of the frame of the TV. •• This is part of the product’s design and is not a defect. The PIP menu is not available. •• PIP functionality is only available when you are using a HDMI, PC or components source. The message “Scramble signal” or “Weak Signal/No Signal” appears. ◀ •• If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.
Issues Solutions and Explanations There are recurrent picture/ sound issues. •• Check and change the signal/source. A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture. •• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
❑❑ Analogue Channel Teletext Feature The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. NN You can change Teletext pages by pressing the numeric buttons on the remote control.
(Teletext on/mix/off) Activates the Teletext mode for the current channel. Press the button twice to overlap the Teletext mode with the current broadcasting screen. Press it one more time to exit teletext. 8 Stores the Teletext pages. / (store) 4 Displays the teletext on the upper half of the screen in double-size. To move the text to (size) the lower half of the screen, press it again. For normal display, press it once again.
Colour buttons (red, green, yellow, blue) If the FASTEXT system is used by the broadcasting company, the different topics on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A new colourcoded page is displayed. Items can be selected in the same way. To display the previous or next page, press the corresponding coloured button. 0 (mode) Selects the Teletext mode (LIST/ FLOF).
(hold) Holds the display at the current page, in the case that there are several secondary pages that follow automaticially. To undo, press it again. 2 Displays the next Teletext page. 9 (page up) 3 Displays the previous Teletext page.
Typical Teletext page Part ◀ Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information.
❑❑ Licence TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under licence form SRS Lab, Inc. Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ◀ Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.
DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under licence. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
