User Manual

Viewing an External Signal Source
English - 52
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top box, and the TV
source (broadcast or cable).
1 Press the MENU () button.
Result
: The main menu is displayed.
2 Press the ENTER () button to select Input.
Result
: The Input menu is displayed.
3 Press the ENTER () button.
Result
: The Source List is selected.
4 Press the ENTER () button agian.
5 Press the … or † button to select the signal source, press the
ENTER () button.
Result
: The available signal sources are listed.
➢
◆ TV, Ext.1, Ext.2, AV , S-Video, Component, or PC
: on the TV’s rear panel.
◆ You can also set these options simply by pressing the
SOURCE () button on the remote control.
6 Press the MENU () button.
Result
: The main menu is displayed.
7 Press the ENTER () button to select Input.
Result
: The Input menu is displayed agian.
8 Press the … or † button to select Edit Name.
Press the
ENTER () button.
9 Press the … or † button to select external source to be edited.
Press the
ENTER () button.
Result
: The available device names are listed.
VCR, DVD, D-VHS, Cable STB, HD STB, Satellite
STB
, AV Receiver, DVD Receiver, Game, Camcorder,
DVD Combo, DHR (DVD HDD Recorder), or PC
10 Select the required device by pressing the … or † button.
Press the
ENTER () button.
➢
If you change the external source while viewing, pictures
might take a short period of time to switch.
Source List : TV
Edit Name
Input
TV
Move Enter Return
Source List : TV
Edit Name
Input
TV
Move Enter Return
TV
Ext.1 :
----
Ext.2 : ----
AV : ----
S-Video : ----
Component : ----
PC : ----
Source List
TV
Move Enter Return
Ext.1 : ----
Ext.2 : ----
AV : ----
S-Video : ----
Component : ----
PC : ----
Edit Name
TV
Move Enter Return
----
VCR
DVD
D-VHS
Cable STB
BN68-00867B-00Eng_0404 4/6/05 5:34 PM Page 52