User Manual

The mains lead is attached to the rear of your television.
1 Plug the mains lead into an appropriate socket.
Result
: The Standby indicator on the front of the television
lights up.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2 Press the power button on the front of the television (or POWER
() button on the remote control) to switch the television on.
Result
: The programme that you were watching last is
re-selected automatically.
➢
If you have not yet stored any channels, no clear picture
appears. Refer to “Storing Channels Automatically” on page
17 or “Storing Channels Manually” on page 18.
3 To switch your television off, press the power button again.
Switching Your Television On and Off
English - 13
Front of the TV
BN68-00867B-00Eng_0404 4/6/05 5:33 PM Page 13