D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 1 PDP-TELEVISION (PLASMA DISPLAY PANEL) Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 2 Safety Instructions ENG ◆ Do not place the PDP on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. ◆ Do not expose the PDP to extreme temperature conditions or to extreme humidity conditions. ◆ Do not expose the PDP to direct sunlight and other sources of heat. ◆ Do not expose the PDP to any liquids. ◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the PDP.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 3 Caution ENG CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash and arrow head within the triangle is a warning sign alerting you of “dangerous voltage” inside the product.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 4 ENG Contents ◆ FOREWORD ■ ■ ■ Safety Instructions ......................................................................................... User Instructions............................................................................................ Caution ..........................................................................................................
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 5 ENG Contents (continued) ◆ USING YOUR DISPLAY ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Adjusting the Sound Settings ........................................................................ Adjusting the Volume Automatically .............................................................. Setting the TruSurround XT........................................................................... Selecting the Internal mute..............................................................
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 6 Your New Plasma Display Panel ➢ ENG The actual configuration on your PDP may be different, depending on your model. Front Panel a b Speaker a b SOURCE I/ External input selection. Press to turn the PDP on and off. MENU Power Indicator Menu display. - Power Off: Blue - Power On: Off - + Volume adjustment. C/P. Channel selection. Auto power On.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 7 Your New Plasma Display Panel (continued) ➢ The actual configuration on your PDP may be different, depending on your model. ENG Side of the TV S-Video Input Video Input Audio Input (L, R) Rear Panel ➢ For further details about connection, refer to pages 55~59. a) DVI INPUT Connect to the video output jack for device with DVI output. g) AV1, AV2, AV3 (VIDEO / L-AUDIO-R ) Video and audio inputs for external devices, such as a camcorder or VCR.
D65A-BN68-00583A-00 ENG 2004.1.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 9 Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you: ◆ Purchase the PDP ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 10 Installing the Display on the Wall Attachment Panel ENG Installation Notes ◆ Do not install the PDP on any place other than vertical walls. ◆ To protect the performance of the PDP and prevent troubles, avoid the followings: - Do not install next to smoke and fire detectors. - Do not install in an area subjected to vibration or high voltage. - Do not install near or around any heating apparatus. ◆ Use only recommended parts and components.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 11 Installing the Display on the Wall Attachment Panel (continued) ➢ The exterior of the PDP may be different than the picture. (Assembly and installation of the plastic hanger is the same.) 1 Remove the screws from the back of the PDP. 2 ENG Use the screws and assemble the plastic hanger. ☛ ◆ Please ask the installers to install the wall mount bracket.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 12 Connecting to an Aerial or Cable Television Network ENG To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network Rear of the PDP or Cable Television Network 1 In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the PDP.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 13 Switching On and Off ENG The mains lead is attached to the rear of your PDP. ☛ 1 If you have purchased this PDP in the United Kingdom, refer to page 64 for further instructions on plug wiring. Plug the mains lead into an appropriate socket. Result: ➢ 2 Front of the PDP The Standby indicator on the front of the PDP lights up. The main voltage is indicated on the rear of the PDP and the frequency is 50 or 60Hz.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 14 Becoming Familiar with the Remote Control ENG The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Display the on-screen menu system The following table presents the most frequently used buttons and their functions. Button to SLEEP Menu Function Used to display the next stored channel. - Used to display the previous stored channel. - Used to display the corresponding channels.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 15 Setting Up Your Remote Control ENG This PDP’s remote control can operate VCR, CATV , DVD, or Set-top box (STB), in addition to controlling the PDP. ➣ The remote control is not compatible with the TV manufactured by another company. 1 Turn off your VCR, Cable box, DVD or STB. 2 Press the SELECT button. Mode is changed whenever SELECT button is pressed. 3 Press the POWER ( ) button on the remote control. The component you select should turn on.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 16 Plug & Play Feature ENG Plug & Play Press ENTER to Start Plug & Play When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. Start Enter Exit 1 Language Move Result: 3 Press the ENTER ( Result: Country 6 Press the ENTER ( ➢ Auto Store Auto Store Channel store in process. Storing.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 17 Plug & Play Feature (continued) ENG If you want to reset this feature... 1 2 TV Press the MENU button. The main menu is displayed. Result: Press the ENTER ( 4 Press the † or … button to select Miscellaneous. The options available in the Miscellaneous group are Result: displayed. 6 : English √ √ AV Setup Press the † or … button to select Setup. The options available in the Setup group are displayed.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 18 Storing Channels Automatically ENG TV Channel Country √ : Austria Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch. Scan √ You can scan for the frequency ranges available to you, (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU button.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 19 Storing Channels Manually ENG You can store up to 100 television channels, including those received via cable networks. TV Channel Country When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify √ Manual Store √ Edit √ Fine Tune √ Ch. Scan √ Move 1 The main menu is displayed. Press the † or … button to select Channel.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 20 Storing Channels Manually (continued) ENG 7 Manual Store Prog. Colour System Sound System 9 Auto BG Channel Search Store C -- 245MHz ? Adjust Return œ √ Move ◆ Press the œ or √ button to select Channel. ◆ Press the † or … button to select C (Air channel) or S (Cable channel). ◆ Press the √ button. ◆ Press the numeric buttons (0~9) to select indicate the required number.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 21 Skipping Unwanted Channels ENG ◆ Skipping unwanted channels You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are thus not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1 Channel Country √ : Austria Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch. Scan √ Press the MENU button.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 22 Sorting the Stored Channels ENG TV This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using ATM. You can delete those channels you do not want to keep. Channel Country √ : Austria Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 23 Assigning Names to Channels ENG Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 4 8 √ Fine Tune √ Ch. Scan √ ) Return Edit Add/Delete √ Sort √ √ Name LNA √ : Off √ Child Lock ) The Name menu is displayed with the current channel automatically is selected. Move Enter Prog.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 24 Using the LNA (Low Noise Amplifier) Feature ENG TV Channel Country : Austria √ Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch. Scan √ This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, but not noise. 1 Result: 2 Move Enter TV Return Edit Add/Delete √ Sort √ √ Name LNA Press the ENTER ( 4 Press the † or … button to select Edit.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 25 Activating the Child Lock ENG ◆ Activating the child lock This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme. 1 Channel Country √ : Austria Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 26 Displaying Information ENG You can view the channel information and setting status you select by pressing the “INFO ( )” button on the remote control. Mono P1 ✽ Picture Sound 00 : 00 : Dynamic : Music Changing the Picture Standard TV You can select the type of picture which best corresponds to your viewing requirements.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 27 Adjusting the Picture Settings ENG Your television has several settings which allow you to control picture quality. 1 The main menu is displayed. Press the † or … button to select Picture. Result: The options available in the Picture group are displayed. 3 Press the ENTER ( 4 Select the required option (Custom, Colour Tone) pressing the † or … button. 5 Press the † or … button to select Custom. Press the ENTER ( ) button.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 28 Adjusting the Picture Settings (PC or DVI Mode) ➢ ENG 1 TV Picture Mode Custom Colour Tone Colour Control Film Mode Size DNIe PIP Move : Normal : Off : 16 : 9 : On Enter TV √ √ √ √ √ √ √ √ : Dynamic Preset to the PC or DVI mode by using the SOURCE button. Press the MENU button. Result: 2 Press the † or … button to select Picture. Result: 3 Press the ENTER ( 4 Press the † or … button to select Custom. Press the ENTER ( ) button.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 29 Setting the Picture (PC Mode) ➢ 1 Preset to the PC mode by using the SOURCE button. ENG Press the MENU button. TV Result: 2 The main menu is displayed. Press the ENTER ( 4 Press the † or … button to select PC Setup. Press the ENTER ( ) button. √ Digital NR 5 Miscellaneous √ PC Setup √ ) button. Enter TV The options available in the PC Setup group are displayed. Press the † or … button to select Image Lock. Press the ENTER ( ) button.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 30 Setting the Picture (PC Mode) ➢ ENG 12 TV PC Setup Image Lock √ Position √ Information √ Auto Adjustment √ Preset to the PC mode by using the SOURCE button. If you get the PC information, select the Information by pressing the † or … button. Press the ENTER ( ) button. Result: 13 Enter Information Resolution : 1024 ✻ 768 : 48.5KHz V Frequency : 60.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 31 Using the Fine Tune ENG If reception is weak, you can fine tune a channel manually. TV 1 2 √ Press the MENU button. Auto Store √ Result: Manual Store √ Edit √ Fine Tune √ Ch. Scan √ The main menu is displayed. Press the † or … button to select Channel. Result: The options available in the Channel group are displayed. 3 Press the ENTER ( 4 Press the † or … button to select Fine tune. Press the ENTER ( ) button.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 32 Viewing the Channel Scan Picture ENG TV 1 Channel Country √ : Austria Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch. Scan √ Move Enter Return Press the MENU button. Result: 2 The main menu is displayed. Press the † or … button to select Channel. Result: The options available in the Channel group are displayed. 3 Press the ENTER ( 4 Press the † or … button to select Ch. Scan. Press the ENTER ( ) button. ) button. Ch.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 33 Selecting the Picture Size ENG You can select the picture size which best corresponds to your viewing requirements. 1 3 4 5 The main menu is displayed. Press the † or … button to select Picture. Result: The options available in the Picture group are displayed. Press the ENTER ( ) button. 6 Move ) button to confirm.
D65A-BN68-00583A-00 ENG 2004.1.28 9:34 AM Page 34 Selecting the Film Mode ENG TV You can automatically sense and process film signals from some sources and adjust the picture for optimum quality. Picture Mode Custom Colour Tone Colour Control Film Mode Size DNIe PIP Move : Dynamic : Normal : Off : 16 : 9 : On Enter TV √ √ √ √ √ √ √ √ Move Press the MENU button. The main menu is displayed. Result: 2 Press the † or … button to select Picture.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 35 Setting the Blue Screen TV Setup √ Time If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen“ mode to “Off“. 1 : English Digital NR : On √ Miscellaneous √ PC Setup √ Press the ENTER ( 4 Press the † or … button to select Miscellaneous.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 36 Viewing the Picture In Picture (PIP) ENG TV Picture Mode Custom Colour Tone Colour Control Film Mode Size DNIe PIP Move : Dynamic : Normal : Off : 16 : 9 : On Enter √ √ √ √ √ √ √ √ Return You can display a sub picture within the main picture of TV program or external A/V devices. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. 1 Press the MENU button.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 37 Viewing the Picture In Picture (PIP) (continued) ENG PIP TV 9 PIP Source Swap Size Position Prog. Press the † or … button to select Position. Press the ENTER ( ) button. Result: 10 The positions available are displayed. - Press the † or … button to select Prog.. Select the channel that you want to view through sub picture by pressing the ENTER ( ) button.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 38 Using the Digital NR (Digital Noise Reduction) Feature ENG TV Setup √ Time Language : English √ √ AV Setup Digital NR √ : On Miscellaneous √ PC Setup √ Move Enter TV If the signal received by your television is weak, you can activate this feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. The main menu is displayed. Result: 2 Press the ▲ or ▼ button until the Setup is selected.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 39 Changing the Sound Standard ENG You can select the type of special sound effect to be used when watching a given broadcast. TV Sound Mode 1 2 √ Equalizer Press the MENU button. Result: The main menu is displayed. Auto Volume : Off √ SRS TSXT : Off √ Internal Mute : Off √ Press the † or … button to select Sound. Result: The options available in the Sound group are displayed.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 40 Adjusting the Sound Settings ENG The sound settings can be adjusted to suit your personal preferences. TV Sound Mode √ : Standard 1 Press the MENU button. The main menu is displayed. Result: 2 Press the † or … button to select Sound. The options available in the Sound group are displayed. Result: 3 Press the ENTER ( 4 Press the † or … button to select Equalizer. Press the ENTER ( ) button.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 41 Setting the TruSurround XT ENG TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Tursurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 42 Selecting the Sound Mode (depending on the model) ENG The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual-I ” or “Stereo”, depending on the current transmission.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 43 Setting the Sleep Timer ENG You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode. 1 Setup √ Time Press the MENU button. Result: 2 TV Language The main menu is displayed. Digital NR The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the † or … button to select Time. Press the ENTER ( button..
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 44 Setting and Displaying the Current Time ENG TV Setup √ Time Language : English You can set the television’s clock so that the current time is displayed by pressing the “INFO ( )” button. You must also set the time if you wish to use the automatic on or off timers. ➣ √ √ AV Setup Digital NR √ : On Miscellaneous √ PC Setup √ Move Enter TV 1 Press the MENU button. The main menu is displayed.
D65A-BN68-00583A-00 ENG 2004.1.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 46 Viewing an External Signal Source ENG TV Input Source List √ : TV Use the remote control to switch between viewing signal from connected equipment, such as VCR, DVD, Set-Top-boxs and the TV source (broadcast or cable) √ Edit Name 1 Press the MENU button. Result: Press the ▼ or ▲ button to select Input . 2 Move Enter TV Return Source List TV Ext.1 Ext.2 Ext.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 47 Redirecting an Input to the External Output ENG Your television enables you to choose which audio/video signals are output to the external connector. TV Setup √ Time 1 2 Press the MENU button. Language Result: Digital NR The main menu is displayed. The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the † or … button to select AV Setup. Press the ENTER ( ) button. Result: 5 6 ) button.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 48 Teletext Feature ENG Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram). Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 49 Displaying the Teletext Information ENG You can display Teletext information at any time on your television Teletext information to be displayed correctly, ☛ For channel reception must be stable; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service by pressing the P or button. 2 Press the TTX/MIX ( Result: ) button to activate the teletext mode.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 50 Selecting Display Options ENG When you have displayed a Teletext page, you can select various options to suit your requirements. To display... TV 50 Press the...
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 51 Selecting a Teletext Page ENG You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result: The current page counter is incremented and the page is then displayed. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 52 TeleWeb Feature (Option) ENG TV Setup √ Time Language √ : English √ AV Setup Digital NR √ : On Miscellaneous √ PC Setup √ TeleWeb √ Move TeleWeb is the new television broadcasting standard for Teletext services. TeleWeb is similar to Teletext, just easy to use. TeleWeb can transmit the News, TV programme information, and advertising in excellent picture quality and directly access via the remote control.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 53 Using the TeleWeb Menu after Displaying the TeleWeb ENG Bookmarking the current page. TeleWeb 1 On the page you wish to add to the bookmark list press the MENU button. Result: 2 The TeleWeb menu is displayed. Press the † or … button to select Add Bookmark. Press the ENTER ( ) button. Result: ➢ The current page is added to the bookmark list. You can register up to six pages.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 54 Easy Accessing the TeleWeb Service via the Remote Control ENG Button TeleWeb Function Activate or deactivate the TeleWeb feature directly. Display the forward page of the TeleWeb Display the backward page of the TeleWeb Select a option. Confirm your choice.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 55 Connecting to the External Devices ENG “MONITOR OUT” are used for the equipment with an RGB output, such as video game devices or video disc players.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 56 Connecting to the S-Video Input ENG The S-VIDEO1 and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Rear of the TV ① and Camcorder Side of the TV ① VCR and ① To play picture and sound, both the S-VIDEO and RCA connectors must be used. ☛ 56 Whenever you connect an audio or video system to your television, ensure that all elements are switched off.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 57 Connecting to the DVI Input ENG The “DVI” (video) and “L-AUDIO-R” connectors are used for equipment with a DVI output. Rear of the TV Personal Computer and Connecting to the PC Input The “RGB” (video) and “AUDIO” connectors are used for interfacing with your PC.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 58 Connecting to the Component Input ENG Rear of the TV ① The “COMPONENT 1” connectors are ① DVD ② DTV receiver used for equipment with a DVD output. (480i,p/576i,p/720p/1080i) ② The “COMPONENT 2” connectors are used for DTV receiver.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 59 Connecting and Using the Home Theater System ENG Use the Monitor Out ports of the PDP for Home Theater System Connections. Rear of the TV Connecting the Home Theater System ① Connect the monitoring audio out L, and R jacks of the MONITOR OUT on the rear-side connection panel of the PDP TV to the AUDIO IN jacks of the DVD Home Theater System (or AV Receiver) using the audio cable.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 60 Setting up Your PC Software (Windows only) ENG The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 61 Input Mode (PC/DVI) ENG Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Video Signal Dot x Line 640 x 350 640 x 400 720 x 400 640 x 480 IBM PC / AT Compatible 800 x 600 848 x 480 1024 x 768 Vertical frequency (Hz) Horizontal frequency (kHz) Vertical polarity Horizontal polarity 70.086 85.080 85.080 70.087 85.039 59.940 72.809 75.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 62 Pin Configurations ENG SCART Connector (AV1/AV2/AV3) ➢ Pins 5, 7, 9, 11, 13, 15 and 16 are used for RGB processing and are only wired on the AV1 or AV2 or AV3 connector.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 63 Troubleshooting: Before Contacting Service Personnel ENG Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the “ I ” button (On/Off) and the POWER ( ) button.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 64 Wiring the Mains Power Supply Plug (UK Only) ENG IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable.
D65A-BN68-00583A-00 ENG 2004.1.
D65A-BN68-00583A-00 ENG 2004.1.
D65A-BN68-00583A-00 ENG 2004.1.
D65A-BN68-00583A-00 ENG 2004.1.28 9:35 AM Page 68 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. ELECTRONICS European Notice Products with the CE marking comply with the EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
