ELECT Plasma Display with Media Station Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
Safety Instructions ENG ◆ Do not place the PDP on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. ◆ Do not expose the PDP to extreme temperature conditions or to extreme humidity conditions. ◆ Do not expose the PDP to direct sunlight and other sources of heat. ◆ Do not expose the PDP to any liquids. ◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the PDP.
Caution ENG CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash and arrow head within the triangle is a warning sign alerting you of “dangerous voltage” inside the product. ☛ The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.
ENG Contents (continued) ◆ FOREWORD ■ ■ ■ ■ Safety Instructions............................................................................................... User Instructions ................................................................................................. Caution................................................................................................................ Checking Parts....................................................................................................
ENG Contents ◆ USING YOUR DISPLAY ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Setting the Dolby Surround ................................................................................. Adjusting the Dolby Pro Logic Preferences......................................................... Adjusting the Headphone Preferences ............................................................... Hearing the Melody Sound.................................................................................. Setting the Current Time ..............
Viewing the Plasma Display ➢ ENG The actual configuration on your PDP may be different, depending on your model. Front Panel Speaker Speaker POWER Remote Control Signal Receiver Press to turn the PDP on and off. Aim the remote control towards this spot on the PDP. SOURCE External input selection. MENU Menu display. - + ▼ C/P. MUTE Volume adjustment. ▲ Channel selection Temporary sound switch off.
Viewing the Media Station ENG Front Panel Channel selection Headphone connector Stand by /Power On indicator S-Video input Power On/Off On-Screen display Audio inputs Temporary sound switch off External input selection Video input Menu display Volume adjustment Rear Panel ➢ For further details about connection, refer to pages 48~51. e d f g a b m l i c k h j a) VHF/UHF (75Ω) 75Ω Coaxial connector for Aerial/Cable Network.
Remote Control Buttons ENG AUTOMATIC SWITCH-OFF VCR/DVD FUNCTIONS; - STOP (Stop) - REWIND (Rew) - PLAY/PAUSE (Play/Pause) - FAST FORWARD (FF) Power POWER ON/OFF PIP FUNCTIONS; - PIP ACTIVATING OR DEACTIVATING (PIP ON) - SWAPPING THE MAIN AND THE SUB PICTURE (Swap) - SELECTING THE LOCATION OF SUB PICTURE (Locate) - SELECTING THE CHANNEL OF SUB PICTURE (P▲/▼) - SETTING THE SIZE OF SUB PICTURE (Size) - SELECTING THE INPUT SOURCE (Source) - SCANNING THE CHANNEL OF SUB PICTURE (Scan) NUMERIC BUTTONS MAKE TH
Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you: ◆ Purchase the PDP ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.
Installing the Display on the Wall Attachment Panel ➢ ENG Wall attachment panel is sold separately. Check with your dealer 1 Check for the stability of the wall where the PDP is to be installed. If the wall is not enough strong to support the PDP, strengthen the wall before installation. 2 Fix the wall attachment panel on the wall using bolts as shown in the figure: Fixing bolts must protrude from the wall appox. 1.5 cm.
Installing the Display on the Wall Attachment Panel ENG 4 Remove four large screws from the rear side of the display. Insert the bolts, dish-type washers, and insulation rubber into the four screw-holes as shown in the figure: Bolt Insulation rubber 5 Hang the protruding plastic part on the rear of the PDP up the groove on the top of the wall attachment panel. Then, lift down the PDP. (Do not lift down the PDP with too much force. The protruding plastic part might be taken off.
Separating the Display from the Wall Attachment Panel ENG After lifting the PDP up, pull it forward and remove it from the wall attachment panel.
Connecting Speakers ENG Connecting PDP and Speakers Fix the bracket onto the guide pole located on the rear of speaker and fasten the screws. After removing the three screws on the PDP, clamp the speaker and the PDP together and fasten the screws. Guide pole Guide pole Connecting Stand and Speakers ➢ Guide pole When moving your PDP, do NOT hold the speaker connected to your PDP.
Connecting to an Aerial (or Cable Television Network) ENG To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network Rear of the Media Station or Cable Television Network 14 1 In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the Media Station.
Switching On and Off ENG 1 Plug the mains lead of the PDP and Media Station into an appropriate socket. 2 Connect the video cable between the DISPLAY SIGNAL IN on the rear of the PDP and the DISPLAY SIGNAL OUT on the rear of the Media Station. 3 Press the POWER button on the front panel of the Media Station or remote control to switch the display on. ☛ Rear of the PDP - Power cord ◆ Do not connect the power cord between PDP and Media Station.
Becoming Familiar with the Remote Control ENG The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Display the on-screen menu system The following table presents the most frequently used buttons and their functions. Button Viewing Function Menu Function Used to display the next stored channel. - P Used to display the previous stored channel. - to Used to display the corresponding channels.
Setting up your Remote Control ENG 1 Turn off your VCR, Cable box, or DVD. 2 Press the Select button repeatedly to activate another component (VCR, Cable, DVD). Example: If you want to program the remote control to operate your VCR, make sure that the VCR LED is illuminated. 3 Press the Power button on the remote control. The component you select should turn on. If it turns on, your remote control is now set correctly.
Plug and Play ENG When the Media Station is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the Media Station is in Standby mode, press the Power button on the remote control. Result: 2 Plug & Play Select the appropriate language by moving the joystick left or right. Press the MENU button. Result: English Language Select Menu 3 ➣ To start the store, press the joystick button.
Choosing Your Language ENG When you start using your PDP for the first time, you must select the language which will be used for displaying menus and indications. 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. 3 Press the joystick button. The Language is selected. Result: 4 Select the appropriate language by moving the joystick left or right.
Storing Channels Automatically ENG You can scan for the frequency ranges available to you, (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. Channel Austria Country Auto Store Manual Store Channel Sort Channel Edit Fine Tune Move Select Menu Channel 1 Press the MENU button. The main menu is displayed.
Sorting the Stored Channels ENG This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep. Channel Austria Country Auto Store Manual Store Channel Sort 1 2 3 Press the MENU button. The main menu is displayed. Result: Channel Edit Fine Tune Move Move the joystick up or down until the Channel is selected. The options available in the Channel group are Result: displayed.
Storing Channels Manually ENG Channel Austria Country You can store up to television channels, including those received via cable networks. Auto Store When storing channels manually, you can choose: Manual Store Channel Sort ◆ Whether or not to store each of the channels found Channel Edit ◆ The programme number of each stored channel which you wish to identify Fine Tune Move Enter Menu Manual Store Program No. Press the MENU button. The main menu is displayed.
Storing Channels Manually ENG 9 If you know the number of the channel to be stored... ◆ Move the joystick up or down until the Channel No. is selected. Move the joystick right. ◆ Select the C (Air channel) or S (Cable channel) by moving the the joystick up or down. Move the joystick right. ◆ Select the required number by moving the the joystick up or down. ➣ 10 11 12 Manual Store Program No. 1 Colour System Auto Sound System B/G Freq. Search 187 MHz Channel No.
Editing the Channels ENG Channel Austria Country 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Channel is selected. The options available in the Channel group are Result: displayed. 3 Press the joystick button. 4 Move the joystick up or down until the Channel Edit is selected. Press the joystick button. The options available in the Channel Edit group are Result: displayed with the current channel is selected.
Fine Tuning Channel Reception ENG If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. Channel Austria Country Auto Store Manual Store Channel Sort Channel Edit 1 2 Press the MENU button. The main menu is displayed. Result: Move the joystick up or down until the Channel is selected.
Changing the Picture Standard ENG Picture Custom Mode Contrast Brightness Sharpness Colour Tint Colour Tone Move Normal Select You can select the picture mode which best corresponds to your viewing requirements. 1 Press the MENU button. The Picture menu is displayed. Result: 2 Press the joystick button to enter the picture menu. The Mode is selected. Result: 3 To select the picture effect which best corresponds to your viewing requirements, move the joystick left or right.
Changing the Picture Size ENG You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. 3 Press the joystick button. 4 Move the joystick up or down until the Size is selected. 5 Select a your required size by moving the joystick left or right.
Adjusting the Picture Settings (PC or DVI Mode) ➢ ENG Colour Tone Custom Mode R G B Move Select Move 1 Press the MENU button. The Picture menu is displayed. Result: 2 Press the joystick button to enter the picture menu. 3 Select a option (Contrast, Brightness, Sharpness) to be adjusted by moving the joystick up or down. The horizontal bar is displayed. Move the joystick left Result: or right until you reach the setting. 4 Move the joystick up or down until the Colour Tone is selected.
Setting the Picture (PC Mode) ➢ Preset to the PC mode by using the Source button. ENG 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. 3 Press the joystick button. 4 Move the joystick up or down until the Image Lock is selected. Press the joystick button. The options available in the Image Lock group are Result: displayed.
Changing the Sound Standard ENG You can select the type of special sound effect to be used when watching a given broadcast. Sound Custom Mode Equalizer Auto Volume Source Sound Mode Dolby Surround Headphone Move Off Main Stereo 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Sound is selected. The options available in the Sound group are displayed. Result: 3 Press the joystick button. The Mode is selected.
Adjusting the Volume Automatically ENG Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the selected channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. 1 Press the MENU button.
Selecting the Sound Mode ENG Sound Mode Equalizer Auto Volume Source Sound Mode Dolby Surround Headphone Move Custom Off Main Stereo Depending on the particular program being broadcast, you can display and control the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual-I ” or “Stereo”, depending on the current transmission. 1 Select Press the MENU button. Result: Menu 2 The main menu is displayed.
Setting the Dolby Surround ENG This feature allows you enjoy Dolby Pro Logic surround effect fully with only surround speakers are connected to the Media Station. Rear of the Media Station This allows various modes for the main, center, surround and woofer speakers to be selected. 1 Press the MENU button. Result: 2 The main menu is displayed. Move the joystick up or down until the Sound is selected. Result: The options available in the Sound group are displayed. 3 Press the joystick button.
Setting the Dolby Surround ENG Input Signal Main Left Off Stereo Mono ✔ ✔ ✔ ✔ ✔ ✔ Virtual Stereo Mono ✔ ✔ ✔ ✔ ✔ ✔ Pro Logic - Normal Stereo Mono ✔ - Phantom Stereo Mono ✔ ✔ - Wide Stereo Mono ✔ Surround Mode Center ✔ ✔ ✔ ✔ Main Right Surround Right Surround Left Sub Woofer ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ; Sound ➢ 34 If the center speaker is not connected, no sound will be output in Normal and Wide modes when inputting a mono signal.
Adjusting the Dolby Pro Logic Preferences ENG The following Dolby Surround settings can be adjusted to suit your personal preferences. ◆ Volume of the center and rear speakers ◆ Delay time for the rear speakers (between15 and 30 ms) ◆ Activation/deactivation of the test tone to simulate the volume on each speaker Dolby Surround Move 1 1 1 15ms Off Adjust Press the MENU button. Result: 2 Pro Logic Phantom Mode Mode Center Rear Time Delay Test Tone The main menu is displayed.
Adjusting the Headphone Preferences ENG You can adjust the headphone settings to suit your preferences. The following headphone settings are available: Front of the Media Station ◆ Volume, Bass, Treble, Balance. 1 Press the MENU button. Result: 2 Move the joystick up or down until the Sound is selected. Result: Press the joystick button. 4 Move the joystick up or down until the Headphone is selected. Press the joystick button.
Hearing the Melody Sound ENG You can hear clear melody sound when power is switched on or off. 1 2 Press the MENU button. The main menu is displayed. Result: Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. 3 Press the joystick button. 4 Move the joystick up or down until the Melody is selected. 5 Select the required option (On or Off) by moving the joystick left or right.
Switching On and Off Automatically ENG You can switch on or off automatically at the time you select. Also you can select the channel and volume level when it will be switched on. Function English Language Time Size Image Lock AV Setup Melody Normal 1 On Press the MENU button. Result: Move 2 Clock 9 : 35 On Time 6 : 30 On Off Time 0 : 0 Off Sleep Timer Off On Time Program P 1 The options available in the Function group are displayed. 3 Press the joystick button.
Setting the Sleep Timer ENG You can select a time period of between 15 and 360 minutes after which the PDP automatically switches to Standby mode. 1 Press the MENU button. Result: 2 The main menu is displayed. Move the joystick up or down until the Function is selected. Result: Function English Language Time Size Image Lock AV Setup Melody Normal On Move Menu Enter The options available in the Function group are displayed. Time 3 Press the joystick button.
Viewing the Picture in Picture (PIP) ENG You can display a sub picture within the main picture. In this way you can monitor the input sources from any connected equipment. PIP On TV PIP Source Swap Size Locate Program No. Move Large P 1 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the PIP is selected. The options available in the PIP group are displayed. Result: 3 Press the joystick button. The PIP is selected.
Viewing the Picture in Picture (PIP) ENG PIP On TV PIP 7 To select the size of sub picture, select the Size by moving the joystick up or down. Move the joystick left or right. The following sizes are available depending on the Result: input source. Source Swap Size Locate Program No. Move Large P 1 Menu Select ◆ Large - Small - Double 1 - Double 2 ◆ Large - Small ➣ 8 ◆ If the system is different between the main picture and the sub picture, the Double mode is not selected.
Listening to the Sound of the Sub Picture ENG Sound Custom Mode Equalizer Auto Volume Source Sound Mode Dolby Surround Headphone Move Off Sub Stereo Select During the PIP feature is activating, you can listen to the sound of the sub picture. 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Sound is selected. The options available in the Sound group are displayed. Result: 3 Press the joystick button.
Redirecting an Input to the External Output ENG Your PDP enables you to choose which audio/video signals are output to the external connector. 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. 3 4 5 6 Function English Language Time Size Image Lock AV Setup Melody Move Normal On Enter Press the joystick button.
Teletext Feature ENG Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram). Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information.
Displaying the Teletext Information ENG You can display Teletext information at any time on your PDP. Teletext information to be displayed correctly, ☛ For channel reception must be stable; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service by pressing the P or P button. 2 Press the Text/Off button to activate the teletext mode. The contents page is displayed.
Selecting Display Options ENG When you have displayed a Teletext page, you can select various options to suit your requirements. To display... Press the...
Selecting a Teletext Page ENG You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result: The current page counter is incremented and the page is then displayed. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the (hold). Press the (hold) again to resume.
Connecting to the External Devices ENG “AV1” and “AV3” are used for the equipment with an RGB output, such as video game devices or video disc players.
Connecting to the DVD Input ENG The RCA connectors are used for equipment with a DVD output. (480i/480p/576i/576p) Rear of the Media Station DVD Connecting to the S-Video Input The S-VIDEO and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Rear of the Media Station ① and Front of the Media Station Camcorder VCR and ① To play pictures and sound, both the S-VIDEO and RCA connectors must be used.
Connecting to the Audio Output ENG The “SURROUND OUT” and “AUDIO OUT” connectors are used for equipment, such as an audio system or external amplifier (to take full advantage of the Surround sound effect). Rear of the Media Station Audio System/ External Amplifier Connecting to the DVI Input The “DVI IN” and RCA (AUDIO-L/R) connectors are used for equipment with a DVI output.
Connecting to the PC Input ENG The “PC IN” and RCA (AUDIO-L/R) connectors are used for interfacing with your PC. Rear of the Media Station Personal Computer and ☛ Setting up Your Display Plug and Play Our adoption of the new VESA® Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Your PC system can easily identify and configure itself for use with your display.
Setting up Your PC Software (Windows only) ENG The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. On the windows screen, select in the following sequence: Start ➞ Settings ➞ Control Panel. When the control panel screen appears, click on Display and a display dialog-box will appear. Select the Settings tab in the display dialog-box.
Input Mode (PC/DVI) ENG Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Standard Dot x Line VGA 640 x 480 SVGA 720 x 400 800 x 600 XGA 1024 x 768 WVGA 848 x 480 Vertical frequency (Hz) Horizontal frequency (kHz) Vertical polarity Horizontal polarity 85.0 75.0 72.8 59.9 70.1 85.1 75.0 72.2 60.3 56.3 85.0 75.0 70.1 60.0 85 75 72 70 60 43.3 37.5 37.9 31.5 31.5 53.7 46.9 48.1 37.
Pin Configurations ENG SCART Connector (AV1/AV2/AV3) ➢ Pins 5, 7, 9, 11, 13, 15 and 16 are used for RGB processing and are only wired on the AV1 or AV3 connector.
Care and Maintenance ENG With proper care, your PDP will give you many years of service. Please follow these guidelines to get the maximum performance from your PDP. ◆ Identifying Problems - Do not put the PDP near extremely hot, cold, humid or dusty places. - Do not put the PDP near appliances that create magnetic fields. - Keep the ventilation openings clear. - Do not place the PDP on a rough and slanted surface, such as cloth or paper. ◆ Liquids - Do not handle liquids near or on the PDP.
Troubleshooting ENG Before contacting Service Personnel, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the PDP and contact your local dealer. No sound or picture ◆ ◆ ◆ ◆ Normal picture but no sound ◆ Check the volume. ◆ Check whether the MUTE button has been pressed. No picture or black and white picture ◆ Adjust the colour settings. ◆ Check that the broadcast system selected is correct.
Wiring the Mains Power Supply Plug (UK Only) ENG ◆ IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.
Memo ENG 58
Memo ENG 59
- AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
