PDP-TELEVISION (PLASMA DISPLAY PANEL) Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS Picture In Picture (PIP) Energy Saving TELETEXT (Option) SRS TruSurround XT Digital Natural Image engine Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference. BN68-01294E-01 01294E-01_¼±¸_Cover.indd 1 ▪ Model _______________ ▪ Serial No.
User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Height The PDP can normally operate only under 2000m in height.
Contents General Information Function Description User Instructions ............................................. 2 Checking Parts................................................ 4 Using the Stand-Base ..................................... 4 Control Panel ................................................. 5 Connection Panel............................................ 6 Viewing the Remote Control .......................... 8 Operation Switching Your Television On and Off ..........
Checking Parts Owner’s Instructions Remote Control/ AAA Batteries Power Cord Warranty Card/ Registration Card/ Safety Guide Manual Cover-Bottom / Screws (2ea) (Refer to page 37) Ferrite Core for Power Cord Cloth-Clean Ferrite Core for Power Cord Sold Separately Antenna Cable Component Cables Audio Cables PC Cable Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable Ferrite Core (Power Cord) ➢ The ferrite core is used to shield the cable from interference.
Control Panel Front (or Side) Panel 7 ➢ The product colour and shape may vary depending on the model. 1 SOURCE Displays a menu of all of the available input sources (TV, Ext.1, Ext.2, Component, PC, and HDMI). 2 MENU Press to see the on-screen menu of your TV’s features. 3 +− Press to increase or decrease the volume. In the on-screen menu, use the +− buttons as you use the ◄ and ► buttons on the remote control. 4 C/P. Press to change channels. In the on-screen menu, use the C/P.
Connection Panel Rear Panel 1 or 8 Cable Television Network 5 or 2 3 4 6 7 ➢ The product colour and shape may vary depending on the model. ☛ Whenever you connect an audio or video system to your set, ensure that all elements are switched off. When connecting an external device, match the colour of the connection terminal to the cable. 1 POWER IN Connect the supplied power cord.
HDMI IN(DVI IN) − Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device.
Viewing the Remote Control ➢ This is a special remote control for the visually impaired persons, and has Braille points on the POWER, Volume and Channel buttons. The performance of the remote control may be affected by bright light.
Installing Batteries in the Remote Control 1 2 3 Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. Do not mix battery types, i.e. alkaline and manganese. Close the cover as shown in the figure. Remove the batteries and store them in a cool and dry place if you won’t be using the remote control for a long time.
Viewing the Menus 1 2 3 4 5 Press the MENU button. The main menu is displayed on the screen. Its left side has five icons: Picture, Sound, Channel, Setup, and Input. Press the ▲ or ▼ button to select one of the icons. Press the ENTER button to access the icon’s sub-menu. Press the ▲ or ▼ button to move to items in the menu. Press the ENTER button to enter items in the menu. Press the ▲/▼/◄/► button to change the selected items. Press the RETURN button to return to the previous menu.
Plug & Play Feature When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available. If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly displayed. 1 If the television is in standby mode, press the POWER button on the remote control. The message Start Plug & Play is displayed. Press the ENTER button. 2 The Language menu will automatically appear after several seconds.
If you want to reset this feature … 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Setup, then press the ENTER button. 3 Press the ENTER button again to select Plug & Play. The message Start Plug & Play is displayed.
Editing Device Names You can give a name to the external source. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Input, then press the ENTER button. 3 Press the ▲ or ▼ button to select Edit Name, then press the ENTER button. 4 Press the ▲ or ▼ button to select the external source to be edited, then press the ENTER button. 5 Select the required device by pressing ▲ or ▼, then press the ENTER button.
Storing Channels Manually You can store television channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the ENTER button. 3 Press the ▲ or ▼ button to select Manual Store, then press the ENTER button.
Adding / Locking Channels Using the Channel Manager, you can conveniently lock or add channels. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the ENTER button. 3 Press the ▲ or ▼ button to select Channel Manager, then press the ENTER button. Adding channels Using the Channel List, you can add channels. 4 5 Select Channel List by pressing the ENTER button.
Sorting the Stored Channels This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the ENTER button. 3 Press the ▲ or ▼ button to select Sort, then press the ENTER button. 4 Select the channel that you wish to move by pressing the ▲ or ▼ button, then press the ENTER button.
Fine Tuning Channel Reception If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the ENTER button. 3 Press the ▲ or ▼ button to select Fine Tune, then press the ENTER button.
Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture. 3 Press the ENTER button again to select Mode. 4 Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. Available modes: Dynamic, Standard, Movie The settings values may vary depending on the input source. (ex.
Configuring Detailed Settings on the Picture You can set detailed picture settings. 1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture. 3 Press the ▲ or ▼ button to select Detailed Settings, then press the ENTER button. 4 Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Selecting the Picture Size You can select the picture size which best corresponds to your TV viewing requirements. 1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture. 3 Press the ▲ or ▼ button to select Size, then press the ENTER button. 4 Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. Available options: Auto Wide, 16:9, Wide Zoom, Zoom, 4:3, Just Scan TV Auto Wide: Expanding and pulling up the picture from 4:3 to 16:9 ratio.
Digital NR / Active Colour / DNIe 1 2 3 TV Picture Press the MENU button to display the menu. More Press the ENTER button to select Picture. Detailed Settings Select the required option by pressing the ▲ or ▼ button, then Size : Auto Wide press the ENTER button. Screen Mode : 16:9 Digital NR : Auto Available options: Digital NR, Active Colour, DNIe Active Colour : On DNIe : On 4 When you are satisfied with your setting, press the ENTER OK Reset : button. 5 Press the EXIT button to exit.
Sound Features 1 2 3 4 5 TV Sound Press the MENU button to display the menu. Mode : Custom Press the ▲ or ▼ button to select Sound, then press the Equalizer ENTER button. SRS TS XT : Off Select the required option by pressing the ▲ or ▼ button, then Auto Volume : Off press the ENTER button.
Selecting the Sound Mode (depending on the model) The DUAL I-II button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “DUAL-I” or “Stereo”, depending on the current transmission.
Time Features 1 2 TV Setup Press the MENU button to display the menu. Plug & Play Press the ▲ or ▼ button to select Setup, then press the Language : English ENTER button. Time 3 Press the ▲ or ▼ button to select Time, then press the ENTER Game Mode : Off button. Blue Screen : Off Melody : Off 4 Select the required option by pressing the ▲ or ▼ button, then PC press the ENTER button.
Language / Blue Screen / Melody / Light Effect / Energy Saving / HDMI Black Level 1 2 3 4 5 TV Setup Press the MENU button to display the menu. Plug & Play Press the ▲ or ▼ button to select Setup, then press the Language : English ENTER button. Time Select the required option by pressing the ▲ or ▼ button, then Game Mode : Off press the ENTER button.
Using the Game Mode When connecting to a game console such as PlayStationTM or TV Setup XboxTM, you can enjoy a more realistic gaming experience by Plug & Play selecting game menu. Language : English 1 Press the MENU button to display the menu. Time Game Mode : Off 2 Press the ▲ or ▼ button to select Setup, then press the Blue Screen : Off ENTER button. Melody : Off 3 Press the ▲ or ▼ button to select Game Mode, then press the PC ENTER button.
Wall- mount adjustment (Sold separately) Once the wall mount is installed, the position of your TV can be easily adjustable. Rear Panel Auto Wall-Mount Serial Cable(1P to 1P)(Not supplied) Entering the menu 1 2 3 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Wall-Mount Adjustment, then press the ENTER button. Adjust to the desired position using the ▲/▼/◄/► buttons. Press the EXIT button to exit.
Viewing the Picture in Picture (PIP) You can display a sub picture within the main picture. In this way you can watch TV program or monitor the video input from any connected devices. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Setup, then press the ENTER button. 3 Press the ▲ or ▼ button to select PIP, then press the ENTER button. 4 Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Setting up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
Input Mode (PC) Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Vertical Horizontal Resolution frequency frequency (Dot X Line) (Hz) (kHz) 640 x 350 70.086 31.469 720 x 400 70.087 31.469 59.940 31.469 70.000 35.000 640 x 480 72.809 37.861 75.000 37.500 60.317 37.879 IBM PC / AT 70.000 43.750 Compatible 800 x 600 72.188 48.077 75.000 46.875 60.004 48.363 70.069 56.476 1024 x 768 72.000 57.
Setting the PC ➢ Preset to the PC mode by pressing the SOURCE button. 1 2 3 4 5 6 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select PC, then press the ENTER button. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. Available options: Image Lock, Position, Auto Adjustment, Image Reset When you are satisfied with your setting, press the ENTER button.
Setting the Home Theatre PC You can view higher quality pictures by configuring the screen TV Setup settings in PC Mode. More If you set the Home Theatre PC function to On, you can Home Theatre PC : Off Light Effect : Standby Mode On configure the Detailed Settings (when Picture Mode is set to Energy Saving : Off Standard or Movie) as in PC Mode. Screen Burn Protection 1 Press the MENU button to display the menu.
Teletext Feature (depending on the model) Most television stations provide written information services via teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons. For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
The teletext pages are organized according to six categories: Part A B C D E F Contents Selected page number. Broadcasting channel identity. Current page number or search indications. Date and time. Text. Status information. FASTEXT information.
Wall Mount Kit Specifications (VESA) Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. Product Family LCD-TV PDP-TV inch VESA Spec.
How to assemble the Stand-Base (depending on the model) Using the 6 screws for securing the stand base and the monitor, firmly attach the monitor to the stand base. (The exterior of the set may be different than the picture.) In case of installing your TV on the wall, close the cover (1) on the stand-base connection part using two screws for hiding. Warning Firmly secure the stand to the TV before moving it, as the stand may fall and could cause serious injury. or more people should carry ➢ Two the TV.
Specifications The descriptions and characteristics in this booklet are given for information purposes only and are subject to modification without notice.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Kontaktujte SAMSUNG WORLD WIDE (Samsung po celém světě) Pokud máte dotazy nebo připomínky týkající se výrobků Samsung, kontaktujte středisko péče o zákazníky společnosti SAMSUNG. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.
Country BELGIUM Web Site Customer Care Centre 02 201 2418 www.samsung.com/be 844 000 844 www.samsung.com/cz CZECH REPUBLIC Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4 DENMARK 70 70 19 70 www.samsung.com/dk 800-7267 www.samsung.ee ESTONIA FINLAND 030-6227 515 www.samsung.com/fi FRANCE 3260 SAMSUNG (7267864) (€ 0,15/min) www.samsung.com/fr GERMANY 01805-121213 (€ 0,14/Min) www.samsung.de 06-80-SAMSUNG (7267864) www.samsung.
