Professional PDP Display (PLASMA DISPLAY PANEL) Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLD-WIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente. Country ARGENTINE BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA MEXICO PANAMA PUERTO RICO REP.
User Instructions ◆ Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP Display) on the plasma PDP Display panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. ◆ Height The PDP Display can normally operate only under 2000m in height.
Checking Parts Owner’s Instructions Power Cord Remote Control/ AAA Batteries Ferrite Cores for Speaker Wire (2EA) (Refer to page 14) (3301-001201) ➢ Ferrite Core for Power Cord (3301-001110) Stand-Base (2EA) Screws (4EA) PC Cable Ferrite Core (Power Cord, Speaker Wire) The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug. Downloaded From TV-Manual.
Contents ◆ FOREWORD ■ User Instructions............................................................................................ 2 ◆ CONNECTING AND PREPARING YOUR DISPLAY ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Control Panel................................................................................................. Infrared Remote Control ................................................................................ Inserting the Batteries in the Remote Control................................................
Contents ◆ USING YOUR DISPLAY (CONTINUED) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Setting the MDC (Multiple Display Control) ................................................... Preventing Screen Burn-in ............................................................................ Reducing the Effects of Screen Burn ............................................................ Setting the Screen Burn Protection Timer ..................................................... Setting the Multiple Screen..............................
Control Panel ➢ The actual configuration of your PDP Display may be different, depending on your model. Front of the PDP Display Speaker (Optional) Speaker (Optional) a a b c b SOURCE Power Indicator - Select the external input source. - Store your settings in the menu. - When the Main menu is displayed on screen, the Main menu is not operated with source key. - Power Off; Black - Power On; Green MENU Display the on-screen menu. - VOL + - Adjust the volume.
Rear Panel a) POWER IN Connect the supplied power cord. g) RS-232C - IN : Used for the MDC function when connecting b) EXT SPEAKER (8Ω) Connect external speakers. c) DVI/PC AUDIO IN Connect to the audio output jack on your PC or DVI. ➢ AUDIO is an audio input jack for PC1 and PC2 modes. d) DVI IN Connect to the video output jack for device with DVI output. e) PC IN1/PC OUT1 - PC IN1 : Connect to the video output jack on your PC. - PC OUT1 : Connect to the video input jack on external devices.
Infrared Remote Control PDP DISPLAY ON PDP DISPLAY OFF DIRECT CHANNEL SELECTION NOT AVAILABLE VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF PICTURE STILL NEXT CHANNEL EXTERNAL INPUT SELECTION VOLUME DECREASE PREVIOUS CHANNEL SETTING THE TIMER INFORMATION DISPLAY MENU DISPLAY EXIT FROM ANY DISPLAY MOVE TO THE REQUIRED MENU OPTION/ ADJUST AN OPTION VALUE RESPECTIVELY CONFIRM YOUR CHOICE (STORE OR ENTER) PICTURE EFFECT SELECTION AUTO ADJUSTMENT IN PC MODE PIP FUNCTIONS: - PIP ACTIVATION OR DEACTIV
Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: ◆ Purchase the PDP Display ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.
Installing the Display on the Wall Attachment Panel ➢ Refer to the correct installation guide according to your wall bracket. Installation Notes ◆ Contact a technician for installing the wall bracket. ◆ Samsung Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. ◆ This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
To mount the product on the wall bracket ◆ The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1 Remove the 4 screws on the back of the product. 2 Insert the screw into the plastic hanger. (See the figure below) ☛ 3 Tighten the 4 screws in step 2 (plastic hanger + screw ) to the rear holes of the product. 4 ◆ Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers.
Installing the Display Vertically ❋ Samsung shall not be liable for damages caused by installing the product at the different direction from the figure below. You can install the PDP Display vertically. In this case, the fan automatically works. If you wish to stop the fan, position the PDP Display horizontally and then set “Fan” to “Off” in the “Function” menu. Please use the wall attachment panel exclusively when installing vertically.
Connecting Speakers ➢ 1 Speakers are optional. You have to purchase the speakers additionally. Remove the screws on the rear of the PDP Display. PPM42M7H PPM50M7H 2 Hang the two “T” shaped hangers on the square holes on the rear of the PDP Display. 3 Tighten the PDP Display and the speaker bracket using the screws removed from the PDP Display. PPM42M7H ➢ PPM42M7H PPM50M7H PPM50M7H When moving your PDP Display, do NOT hold the speaker connected to your PDP Display.
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP Display matching the “+” and “-” ends of the cable with the diagram on the PDP Display. ➢ ◆ The speakers MUST have a power handling capability of 10 watts minimum (impedance 8Ω). ◆ When you connect the speaker wire to the external speaker out connector, first bind the speaker wire round the ferrite core to secure it. Ferrite Cores The ferrite cores are used to attenuate undesired signals.
Switching Your PDP Display On and Off The mains lead is attached to the rear of your PDP Display. 1 Plug the mains lead into an appropriate socket. Result: ➢ Front of the PDP Display The Standby indicator on the front of the PDP Display lights up. The main voltage is indicated on the rear of the PDP Display and the frequency is 50 or 60Hz. 2 Press the “ ” button on the front of the PDP Display (or the ON ( ) button on the remote control) to switch the PDP Display on.
Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. Picture Mode : Dynamic Color Control Size 1 Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the … or † button to select Picture. The Picture menu is displayed. Result: 3 Press the ENTER ( ) button. The Mode is selected.
Customizing the Picture Settings Your PDP Display has several setting options that allow you to control the picture quality. 1 Picture Mode Press the MENU ( ) button. Result: The main menu is displayed. : Dynamic Color Control Size : 16:9 PIP 2 Press the … or † button to select Picture. Result: The Picture menu is displayed. 3 Press the ENTER ( ) button. Result: The Mode is selected. 4 Press the ENTER ( ) button again. Result: The Mode menu is displayed.
Adjusting the RGB Color (PC Mode) ➢ 1 Preset to the PC mode by pressing the SOURCE button. Press the MENU ( ) button. Picture Mode Result: : Dynamic Color Control Size 2 : 16:9 PIP Press the … or † button to select Picture. Result: Move Enter Return Color Control Red 50 Green 50 Blue 50 Enter Red The Picture menu is displayed. 3 Press the ENTER ( 4 Press the … or † button to select Color Control. Press the ENTER ( ) button.
6 Press the … or † button to select the option (Coarse or Fine) to be adjusted. Press the ENTER ( ) button. Result: ➢ The horizontal bar is displayed. Press the œ or √ button until you reach the optimal setting. Press the ENTER ( 8 Press the MENU ( ) button. The PC menu is displayed again. Coarse Adjust the position by pressing the …, †, œ, or √ button. 11 Press the ENTER ( 12 Press the … or † button to select Auto Adjustment. Press the ENTER ( ) button. Position ) button.
Using Zoom function (PC Mode) ➢ Preset to the PC mode by pressing the SOURCE button. a 1 Press the MENU ( ) button. Setup Result: Time Language : English 2 PC Press the … or † button to select Setup. Result: Move Enter Return Press the ENTER ( 4 Press the … or † button to select PC. Press the ENTER ( ) button. Result: Position Auto Adjustment Image Reset Zoom Enter 6 Press the ENTER ( ) button again. Select the required option by pressing the … or † button.
Selecting the Picture Size You can select the picture size which best corresponds to your viewing requirements. Picture Mode 1 Press the MENU ( Result: ) button. The main menu is displayed. : Dynamic Color Control Size : 16:9 PIP Press the … or † button to select Picture. 2 Result: The Picture menu is displayed. 3 Press the ENTER ( 4 Press the … or † button to select Size. Press the ENTER ( ) button. 5 Select the required option by pressing the … or † button.
Freezing the Current Picture You can freeze the picture when watching a moving picture simply by pressing the “STILL” button. To return to normal viewing, press it again. ➢ In PIP mode, Still function will be applied to the main and sub picture at the same time. Changing the Sound Standard You can select the type of special sound effect to be used when watching a given broadcast. Sound Mode Equalizer SRS TS XT : Custom 1 Press the MENU ( Result: Result: Enter The Sound menu is displayed.
Customizing the Sound Settings Your PDP Display has several settings which allow you to control the sound quality. 1 Press the MENU ( Result: ) button. The main menu is displayed. Sound Mode Equalizer SRS TS XT : Custom : Off Press the … or † button to select Sound. 2 Result: The Sound menu is displayed. Move 3 Press the ENTER ( 4 Press the … or † button to select Equalizer. Press the ENTER ( ) button. Result: 5 The Equalizer menu is displayed.
Setting the TruSurround XT Sound Mode Equalizer SRS TS XT : Custom : Off TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal PDP Display speakers. It is fully compatible with all multichannel formats. 1 Press the MENU ( Result: Move Enter Press the … or † button to select Sound.
Activating Panel Button Lock This feature allows you to lock the PDP Display panel buttons so that it cannot be operated via the PDP Display panel. It can, however, still be operated via the remote control. Only remote control can release the panel lock setting, so keep the remote control away from unauthorized users. Function Screen Burn Protection Safety Lock Multi Control Video Wall Fan 1 Press the MENU ( Result: : Off ) button. The main menu is displayed.
Activating Remote Control Button Lock This feature allows you to lock the remote control so that it cannot be operated via the remote control. It can, however, still be operated via the PDP Display Panel buttons. Function Screen Burn Protection Safety Lock Multi Control 1 Video Wall Fan Press the MENU ( : Off Result: Enter Return Safety Lock Key Lock : Off IR Lock Result: Enter Return Press the ENTER ( 4 Press the ▲ or ▼ button to select Safety Lock. Press the ENTER ( ) button.
Setting Up Your Personal ID Number This feature sets viewing restrictions and prevents unauthorized access to your PDP Display through the PIN (Personal Identification Number), which is a 4 digit number. Function Screen Burn Protection Safety Lock 1 Press the MENU ( Result: ) button. The main menu is displayed. Multi Control Video Wall Fan : Off Press the ▲ or ▼ button to select Function. 2 Result: The Function menu is displayed.
Setting the MDC (Multiple Display Control) This function enables you to easily control the connected PDP Displays on the PC by specifying IDs to connected PDP Displays. Function Screen Burn Protection 1 Safety Lock Press the MENU ( Multi Control Result: Video Wall Fan : Off Enter : 00 ID Input : -- 3 Press the ENTER ( 4 Press the ▲ or ▼ button to select Multi Control. 5 Press the ENTER ( Result: Move Enter : ID Input : Enter Press the ▲ or ▼ button to select ID Input.
Preventing Screen Burn-in To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes. Function Screen Burn Protection Safety Lock Multi Control Video Wall 1 Press the MENU ( Result: ) button. Fan : Off The main menu is displayed.
Reducing the Effects of Screen Burn If screen burn has occurred, you can select a white screen or inverse function to help remove screen burn artifacts. Function Screen Burn Protection 1 Safety Lock Press the MENU ( Result: Multi Control ) button. The main menu is displayed. Video Wall Fan Press the … or † button to select Function. 2 : Off Result: Move Enter Return Screen Burn Protection 3 Press the ENTER ( 4 Press the … or † button to select Screen Burn Protection. ) button.
Setting the Screen Burn Protection Timer You can set the timer for Screen Burn Protection (hours, minutes). If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish. Screen Burn Protection Pixel Shift All White Signal Pattern 1 Press the MENU ( Result: ) button. The main menu is displayed. Inverse Bar Bar & Inverse Timer 2 Press the … or † button to select Function.
Setting the Multiple Screen You can get various display effects with many PDPs. Function 1 Screen Burn Protection Press the MENU ( ) button. Safety Lock Result: Multi Control The main menu is displayed. Video Wall Fan Press the ▲ or ▼ button to select Function. 2 : Off Result: Move Enter Return 3 Press the ENTER ( 4 Press the ▲ or ▼ button to select Video Wall.
Displaying the Setting Information You can view the setting status you select by pressing the “INFO” button on the remote control. AV Picture Sound SRS TS XT -- : -- : Dynamic : Custom : Off Setting and Displaying the Current Time You can set the PDP Display’s clock so that the current time is displayed by pressing the “INFO” button. You must also set the time if you wish to use the automatic on or off timers. Setup Time Language 1 Press the MENU ( ) button. The main menu is displayed.
Switching the PDP Display On and Off Automatically You can set the on or off timers so that the PDP Display will: ◆ Switch on automatically and tune source of your choice at the time you select. Setup Time Language ◆ Switch off automatically at the time you select. : English PC ➢ Move Enter Return 1 The first step is to set the PDP Display’s clock (refer to “Setting and Displaying the Current Time” on page 33).
10 Press the … or † button to select Off Timer. Press the ENTER ( ) button. Result: 11 The Off Timer menu is displayed. Select Hour or Minute by pressing the œ or √ button. Set these by pressing the … or † button. ➢ Setup Time Language You can set the hour and minute directly by pressing the numeric buttons on the remote control. Move 12 Press the œ or √ button to select Activation. 13 To activate Off Timer with the setting entered, select Yes by pressing the … or † button.
Selecting the Fan Fans inside the PDP Display are used to lower the temperature of the tops and the front of the PDP Display. To reduce the noise of the fan, you may stop the fan by setting the Fan to “Off”. The temperature of the top and the front of the PDP Display may increase when you watch the PDP Display for a long period of time while the fan is stopped, but the PDP Display will operate normally.
Viewing the Picture in Picture (PIP) You can display a sub picture within the main picture of external A/V devices. In this way you can PDP Display the video input from any connected devices while monitoring other video inputs. Picture Mode : Dynamic Color Control 1 Press the MENU ( : 16:9 PIP The main menu is displayed. Result: 2 Size ) button. Press the … or † button to select Picture. Move The Picture menu is displayed.
Viewing an External Signal Source Once you have connected up your various audio and video systems, you can view different sources by selecting the appropriate input. Input Source List : AV Edit Name 1 Press the MENU ( Result: Enter Return AV :---- S-Video :---- Component :---- PC1 :---- PC2 :---- DVI :---- Move Result: 3 Source List 5 Press the … or † button to select the signal source, press the ENTER ( ) button.
Connecting to the Audio/Video Input The "AV IN" connectors are used for the equipment with an Composite Video output, such as video game devices or video disc players. Rear of the PDP Display VCR (Input) ① DVD Decoder / Video game device Video disc player The "AV OUT" connectors are used for the equipment with an Composite Video input, such as a camcorder or VCR.
Connecting to the S-Video Input The S-VIDEO and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Rear of the PDP Display Camcorder ① and VCR ① To play picture and sound, both the S-VIDEO and RCA connectors must be used. Connecting to the Component Input Rear of the PDP Display DVD DTV Receiver The COMPONENT IN connectors are used for DTV receiver or DVD. (480i,p/576i,p/720p/1080i) Downloaded From TV-Manual.
Connecting to the DVD/DTV Receiver Input Rear of the PDP Display Y / PB / PR DVD L/R Digital Set-Top Box The “COMPONENT IN” (or “Y/PB/PR” (video) and “AUDIO”) connectors are used for equipment with a DVD/ DTV Receiver output. (480i, 576i, 480p, 576p, 720p, 1080i) Connecting to the DVI Input The “DVI IN” (video) and “AUDIO” connectors are used for equipment with a DVI output. Rear of the PDP Display Personal Computer and Downloaded From TV-Manual.
Connecting to the PC Input The “PC 1” (or “PC IN2 (BNC)”) and “AUDIO” connectors are used for interfacing with your PC. Rear of the PDP Display Personal Computer or Only when watching PDP Display in PC1 mode, you can use the RGB OUT port to connect the current screen to another PDP in the same mode. Downloaded From TV-Manual.
Setting up Your PC Software (Windows only) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1 Right click the mouse on the Windows Desktop, then click on Properties.
Input Mode (PC/DVI) Both screen position and size will vary depending on the type of PC monitor and its resolution.
Power Saver (PC1 mode only) This PDP Display has a built-in power management system called Power Saver. This power management system saves energy by switching your PDP Display into a low-power mode when it has not been used for a certain amount of time. You use a software utility installed on your computer to set up this feature. See the table below for details.
Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the PDP Display and contact your local dealer. No sound or picture ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the ON or OFF button on the remote control. ◆ Check the picture contrast and brightness settings.
Technical Specifications Dimensions (W x D x H) PPM42M7H - 1027 x 96,5 x 630,5 mm ; 40,43 x 3,79 x 24,82 inches PPM50M7H - 1204 x 96,6 x 724,1 mm ; 47,4 x 3,8 x 28,5 inches Weight (Without stand) PPM42M7H - 35,0 kg PPM50M7H - 41,0 kg Screen aspect ratio 16:9 Screen size PPM42M7H - 42 inch PPM50M7H - 50 inch Native pixel resolution (H x V) PPM42M7H - 1024 x 768 PPM50M7H - 1366 x 768 Color systems PAL, SECAM, NTSC (NT3.58/NT4.
This page is intentionally left blank. Downloaded From TV-Manual.
This page is intentionally left blank. Downloaded From TV-Manual.
Downloaded From TV-Manual.
