Specifications

18
|
19
Samsung Plasma Display
Accessories
Speaker
Ceiling Mount
CML 400D
PSM6330D
(PSM6330MD)
PSN5032B
(PSN5032S)
PSN4232B
(PSN4232S)
Pedestal Base
Included in
PPM42M5S / PPM42M5H / PPM50M5H
Tabletop Stand
SMM6330D
Connecting Speakers
1. Remove the screws on the rear of the Plasma Display.
2. Hang the two “T” shaped hangers on the square holes on the rear of
the Plasma Display.
PPM42M5S
PPM42M5H
PPM50M5H PPM63H3Q
PPM42M5S
PPM42M5H
PPM50M5H PPM63H3Q
PPM42M5S
PPM42M5H
PPM50M5H
PPM63H3Q
3. Tighten the Plasma Display and the speaker bracket using the screws
removed from the Plasma Display.
* Available colors of Speaker cover : Black, Silver
WARNING
When moving your Plasma Display, do NOT hold the speaker connected to your
Plasma Display. It may damage the bracket clamping the speaker and your Plasma
Display together and result in dropping the Plasma Display or creating personal
damage and injury.
Wall Mount
WMN6330D
Vertical Mount
VMN6330D VMN4240D
PPM42M5S
PPM42M5H
PPM50M5H PPM63H3Q
PPM42M5S
PPM42M5H
PPM50M5H PPM63H3Q
PDP panel
Wall attachment panel bracket
Wall
1. Remove the screws from the back of the Plasma Display.
2. Use the screws and assemble the plastic hanger.
- Please ask the installers to install the wall mount bracket.
- Please be sure to check if the plastic hanger is completely secured on
both the left and right side after hanging the Plasma Display on the wall
mount bracket.
- Please tightly secure the wall mount bracket to the wall to avoid injury
from a falling Plasma Display.
4. Put the 4 pegs on the Plasma Display in the grooves of the wall mount
bracket and pull down on the Plasma Display (1) to secure it to the wall
mount bracket (2). Tighten the screws as shown (3) so that the Plasma
Display cannot be separated from wall mount bracket.
- Please avoid catching your fingers while installing and adjusting the angle.
3. Tighten the screws of the plastic hanger to the back side of the Plasma
Display.
These optional accessories are available.
Installing the Display on the Wall Attachment Panel
The exterior of the Plasma Display may be different than the picture. (Assembly and installation of the plastic hanger is the same.)
WMN4250D
699.2
499.2
400.0
18.0˚
14.5˚
2-99.2
2-99.2
2-55.2
22.2
21.4
47.9
50.3
400.0
600.0
124.4
120.0
321.8
720.0
244.7
520.3
2-55.2
600.0