BN68-00733A-00_001,104Eng 9/2/04 10:08 AM Page 3 Owner’s Instructions PL-42D4S This device is a Class B digital apparatus.
BN68-00733A-00_002-013Eng 10/15/04 1:53 PM Page 2 Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving.
BN68-00733A-00_002-013Eng 10/15/04 1:53 PM Page 3 Table of Contents General Information Channel Control Your New Plasma Display Panel ......................6 Fine Tuning Channels ..................................64 Remote Control Buttons ..................................8 Wall Installation Instructions ..........................10 Connecting a PC and Operation How to assemble the Stand-Base ..................14 Connection a PC ........................................66 Connecting Speakers ....
BN68-00733A-00_002-013Eng 10/15/04 1:53 PM Page 4
BN68-00733A-00_002-013Eng 9/2/04 10:06 AM P L Page 5 A S M A D I S P L A Y P A N E L General Information Your New Plasma Display Panel ......................................................6 Remote Control Buttons ..................................................................8 Wall Installation Instructions ..........................................................10 How to assemble the Stand-Base ....................................................14 Connecting Speakers ..........
BN68-00733A-00_002-013Eng 9/2/04 10:07 AM Page 6 Your New Plasma Display Panel Front Panel Power Indicator SOURCE/ENTER button Press to display all of the available video sources. (ie., TV, AV, S-Video, Component, PC, DVI). Press to confirm a selection. MENU button - Power Off - Power On - Timer On : Red : Off : Green Remote Control Signal Receiver Aim the remote control towards this spot on the PDP. Displays the main on-screen menu and exit.
BN68-00733A-00_002-013Eng 9/2/04 10:07 AM Page 7 Rear Panel Œ DVI INPUT Connect to the digital video and audio output jack of a device with DVI output. ´ MONITOR OUT (VIDEO / L-AUDIO-R) Outputs for external devices ˇ PC INPUT (RGB IN / AUDIO) Connect to the video and audio output jack on your PC. ¨ ONLY FOR SERVICE Connector for service only. ˆ S-VIDEO Video and audio inputs for external devices with an S-Video output, such as a camcorder or VCR.
BN68-00733A-00_002-013Eng 9/2/04 10:07 AM Page 8 Remote Control Buttons Remote Control 8
BN68-00733A-00_002-013Eng 9/2/04 10:07 AM Page 9 Œ POWER button S. MODE button ´ Number buttons Ò PRE-CH button ˇ +100 button Ú TV/VIDEO button ¨ MUTE button Æ CH (Channel) buttons ˆ VOL (Volume) buttons ı INFO button Turns the PDP on and off. Select Sound effect. Tunes to the previous channel. Press to select channels over 100. For example, to select channel 121, press “+100”, then press “2” and “1.” Press to mute the PDP sound. Press to display all of the available video sources (ie.
BN68-00733A-00_002-013Eng 9/2/04 10:07 AM Page 10 Wall Installation Instructions This wall mount bracket installation guide is for the following models: PL-42D4S Installation Notes 1 2 Do not install the PDP on any location other than a vertical wall. 3 Use only recommended parts and components. To protect the performance of the PDP and prevent problems, avoid the following locations: • Do not install next to smoke and fire detectors.
BN68-00733A-00_002-013Eng 9/2/04 10:07 AM Page 11 How to assemble the Wall Mount Bracket 1 The wall mount comes packaged in 3 parts. These parts must be assembled together. Please tighten the captive screw in the direction of the arrow after assembling the bracket. Install the Wall Mount Bracket after the screws are securely inserted into the wall. Captive Screws ASSY-HINGE (LEFT) Wall Mount Bracket Separate ASSY-HINGE into Left and Right.
BN68-00733A-00_002-013Eng 9/2/04 10:07 AM Page 12 Wall Installation Instructions Fixing the PDP panel to the wall attachment panel bracket 1 Remove the screws from the back of the PDP. 2 Connect insulation holders to screws (see the illustration below). 3 • If you are uncertain about installation, hire a specialist to install the wall mount bracket. • Be sure to check that the insulation holders are completely secured on both the left and right side after hanging the PDP on the wall mount bracket.
BN68-00733A-00_002-013Eng 9/2/04 10:07 AM Page 13 How to Adjust Mounting Angle Notice : Please secure the mounting bracket on the wall surface after setting its angle at 0°. Factory default How to Adjust Mounting Angle Please tighten the captive screw in the direction of the arrow after assembling the bracket. Hold onto the middle of the PDP to adjust the angle (not the sides of the PDP). Change Angle 1 2 3 Secure the SET to the wall mount bracket. (Please refer to the following instructions.
BN68-00733A-00_014-061Eng 9/2/04 10:02 AM Page 14 How to assemble the Stand-Base 1 Assemble two support pins with the stand base and firmly secure both sides of the support pins using 8 screws provided. 2 Assemble the PDP with the stand and firmly secure the PDP using 4 screws provided. ➤ Two or more people should carry the PDP. Never lay the PDP on the floor because of possible damage to the screen. Always store the PDP upright.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 15 Connecting Speakers 1 Remove the screws on the rear of the PDP. 2 Hang the two “T” shaped hangers on the square holes on the rear of the PDP. 3 Tighten the PDP and the speaker bracket using the screws removed from the PDP. ➤ When moving your PDP, do NOT hold the speaker connected to your PDP. It may damage the bracket clamping the speaker and your PDP together and result in a drop of your PDP and a risk of personal damage and injury.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 16 Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP. ➤ The speakers MUST have to a power handling capability of 10 watts minimum (impedance 8Ω). When you connect the speaker wire to the external speaker out connector, first bind the speaker wire round the ferrite core to secure it.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM P L Page 17 A S M A D I S P L A Y P A N E L Connections Connecting Connecting Connecting Connecting Connecting Connecting VHF and UHF Antennas ..............................................18 Cable TV....................................................................19 a VCR........................................................................21 a Camcorder ..............................................................22 a DVD Player.......
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 18 Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads If your antenna looks like this: 1 18 it has 75-ohm round leads. Plug the antenna lead into the VHF/UHF terminal on the PDP. Use the Antenna Cable, an accessory included in the product package.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 19 Connecting Cable TV You can connect different cable systems to your PDP, including cable without a cable box, and cable with a cable box that descrambles some or all channels. Cable without a Cable Box 1 Plug the incoming cable into the VHF/UHF terminal on the PDP. Use the Antenna Cable, an accessory included in the product package. Cable with a Cable Box that Descrambles All Channels.
BN68-00733A-00_014-061Eng 10/27/04 1:49 PM Page 20 Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store). 1 Find and disconnect the cable that is connected to the ANTENNA IN terminal of your cable box. This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN". Connect this cable to a two-way splitter.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 21 Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack PDP VCR Power Plug Audio Cable S-Video Cable Video Cable How to Connect Connect the Video/Audio cables between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the PDP and VIDEO or S-VIDEO / L - AUDIO - R output jacks on the VCR. (Note: For better video, you can use an S-Video cable.) Note • Please be sure to match the color coded input terminals and cable jacks.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 22 Connecting a Camcorder Viewing camcorder tapes Camcorder PDP Power Plug Video Cable Audio Cable How to Connect Connect a Video/Audio cable between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the PDP and the VIDEO or S-VIDEO /AUDIO output jacks on the camcorder. (Note: For better video, you can use an S-VIDEO cable) Note • Please be sure to match the color coded input terminals and cable jacks. Viewing Tapes 1. Turn on your PDP. 2.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 23 Connecting a DVD Player (480i, 480p) This PDP displays the optimum picture in 720p mode. Playing DVD PDP DVD Player Power Plug Video Cable Audio Cable How to Connect 1 Connect a Video Cable between the Y, Pb, Pr (COMPONENT) input jacks on the PDP and Y, Pb, Pr output jacks on the DVD player. 2 Connect a Audio Cable between the AUDIO L/R(COMPONENT) input jacks on the PDP and the AUDIO output jacks on the DVD player.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 24 Connecting a DTV Receiver (480p, 720p, 1080i) This PDP displays the optimum picture in 720p mode. Watching DTV PDP DTV Receiver Power Plug Video Cable Audio Cable or DVI Cable Use a DVI-D connection cable. (sold separately) How to Connect 1 2 3 Connect the cable or antenna to the antenna input jack on the DTV.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM P L Page 25 A S M A D I S P L A Y P A N E L Operation Turning the PDP On and Off ..........................................................26 Plug & Play Feature ......................................................................28 Memorizing the Channels..............................................................31 Viewing an External Signal Source ................................................
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 26 Turning the PDP On and Off Turning the PDP On and Off Press the POWER button on the remote control. The PDP will be turned on and you will be ready to use its features. You can also use the POWER ( )button on the front of the PDP. Viewing the Menus and Displays Your PDP has a simple, easy-to-use menu system that appears on the PDP screen. This system makes it convenient and fast to use features on the PDP.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 27 Displaying Status Information Press the INFO button on the remote control. The PDP will display the Picture mode, Sound mode, MTS, Caption, and Clock.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 28 Plug & Play Feature When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the television is in Standby mode, press the POWER button on the remote control. Plug & Play Start Plug & Play ➤ The message Start Plug & Play is displayed and then the Language menu is automatically displayed.
BN68-00733A-00_014-061Eng 5 9/2/04 10:03 AM Page 29 Select the correct signal source (Air, STD, HRC and IRC) by pressing the ▲ or ▼ button, then press the ENTER button. Air/CATV Air STD HRC IRC Move Enter To start the search, press the ENTER button. 6➤ Skip Auto Program The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range (with lowest first and highest last). When it has finished, the Clock Set menu is displayed.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 30 Plug & Play Feature (continued) If you want to reset this feature... 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC Move 2 3 Press the ▲ or ▼ button to select “Miscellaneous”, then press the ENTER button. Press the ▲ or ▼ button to select “Plug & Play”. Press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 31 Memorizing the Channels Your PDP can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 32 Storing Channels in Memory (Automatic Method) 1 First, select the correct signal source (Air, STD, HRC and IRC). See steps on previous page. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. TV Channel Air/CATV Auto Program Add/Delete Fine Tune Scan Move 2 Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 33 Adding and Erasing Channels (Manual Method) First, press the CH or CH button or the number buttons to select the channel you want to add or delete. 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. TV Channel Air/CATV Auto Program Add/Delete Fine Tune Scan ➤ Quick way to access the Adding and Erasing Channels : Just press the “ADD/DEL” button on the remote control.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 34 To View Memorized Channel 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. TV Channel Air/CATV Auto Program Add/Delete Fine Tune Scan Move 2 Press the ▲ or ▼ button to select “Scan”, then press the ENTER button. Only the memorized channels are chosen. : Air √ √ √ √ √ Enter Return Scan Air 4 Return 3 34 Press the MENU button to stop. Press the MENU button to exit.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 35 Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press the CH or CH button, the PDP changes channels in sequence. You will see all the channels that the PDP has memorized. (The PDP must have memorized at least three channels.) You will not see channels that were either erased or not memorized. Directly Accessing Channels Press the number buttons to go directly to a channel.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 36 Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as VCRs, DVD, Set-Top box and the TV source (broadcast or cable). Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select “Input”. TV Input Source List Edit Name : TV √ √ Enter Return ➤ Quick way to access viewing an external signal source : Just press the “TV/VIEDO” button on the remote control.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 37 Assigning Names to External input mode 1 Press the MENU button. Press the ENTER button to select “Input”. TV Input Source List Edit Name : TV √ √ Edit Name Move 2 Press the ▲ or ▼ button to select “Edit Name”, then press the ENTER button. TV Enter Return Edit Name AV S-Video Component PC DVI : : : : : ---------------- √ √ √ √ √ Edit Name Move 3 Press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 38
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM P L Page 39 A S M A D I S P L A Y P A N E L Picture Control Customizing the Picture ................................................................40 Using Automatic Picture Settings ....................................................41 Selecting the Color Tone................................................................42 DNIe (Digital Natural Image engine) ............................................43 Changing the Screen Size ..........
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 40 Customizing the Picture You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color, and Tint settings of your PDP. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move 2 Press the ▲ or ▼ button to select “Custom”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 41 Using Automatic Picture Settings Your PDP has automatic picture settings that allow you to adjust the video display easily. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP ➤ Quick way to access the picture setting: Just press the “P.MODE” button on the remote control. Move 2 Press the ENTER button to select “Mode”.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 42 Selecting the Color Tone 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move 2 Press the ▲ or ▼ button to select “Color Tone”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 43 DNIe (Digital Natural Image engine) Samsung’s New Technology brings you more detailed images with contrast, white enhancement and 3D noise reduction. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move 2 Press the ▲ or ▼ button to select “DNIe”, then press the ENTER button. TV 3 • On : Switches on the DNIe mode.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 44 Changing the Screen Size Screen size selection depends on the type of video input ( DVD, PC etc.). 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP ➤ Quick way to access the Screen Size menu : Just press the “P. SIZE” button on the remote control. Move 2 Press the ▲ or ▼ button to select “Size”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 45 16:9(W ide) 16:9 Aspect Ratio that fits DVD and Wide Screen applications. 16:9 Panorama Fits a 16:9 picture onto a 4:3 screen and displays it without clipping the image. Panorama Zoom Magnifies the 16:9 wide picture (in a vertical direction) to fit the screen size. Select by pressing the œ or √ button. Use the ▲ or ▼ button to move the picture up and down.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 46 Freezing the Picture Still Press the STILL button on the remote control to freeze a moving picture. Press again to cancel.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 47 Viewing the Picture-in-Picture Selecting the PIP Screen 1 2 TV Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. Move TV 3 Move TV • Check if the V-Chip Lock (refer to page 91) is ON if the PIP On/Off will not function.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 48 Selecting an External Signal You can use PIP to view a signal from an external source, such as a VCR. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 49 Swapping the Contents of the PIP Image and Main Image 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 50 Changing the Size of the PIP Window 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP ➤ Quick way to access PIP size: Just press the “P.SIZE” button on the remote control. Move 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 51 Changing the Location of the PIP Image 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 52 Selecting a Signal Source (Antenna or Cable) for PIP If the PIP source is TV while PIP is ON, you can select the broadcasting source of PIP picture separately from the main picture. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 53 Changing the PIP Channel 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 54
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM P L Page 55 A S M A D I S P L A Y P A N E L Sound Control Customizing the Sound ................................................................56 Using Automatic Sound Settings ....................................................57 Choosing a Multi-Channel Sound (MTS)Soundtrack ..........................58 Using the Auto Volume ..................................................................59 Setting the TruSurround XT .....................
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 56 Customizing the Sound 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. TV Sound Mode Custom MTS Auto Volume SRS TSXT Internal Mute Move 2 Press the ▲ or ▼ button to select “Custom”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 57 Using Automatic Sound Settings 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. TV Sound Mode Custom MTS Auto Volume SRS TSXT Internal Mute Move 2 Press the ENTER button to select “Mode”. TV Move 3 4 Press the MENU button to exit.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 58 Choosing a Multi-Channel Sound (MTS) Soundtrack Depending on the particular program being broadcast, you can listen to stereo, mono, or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather.) 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 59 Using the Auto Volume Each broadcasting station has its own signal conditions, which can make it necessary to adjust the volume every time the channel is changed. “Auto volume” lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. 1 Press the MENU button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 60 Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Trusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system. It is fully compatible with all multichannel formats. 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
BN68-00733A-00_014-061Eng 9/2/04 10:03 AM Page 61 Selecting the Internal Mute The internal speakers can be muted in order to hear sound from external speakers you've connected. 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. TV Sound Mode Custom MTS Auto Volume SRS TSXT Internal Mute Move 2 Press the ▲ or ▼ button to select “Internal Mute”, then press the ENTER button. TV 3 • Pressing the ▲ or ▼ button will alternate between “On” and “Off”.
BN68-00733A-00_062-075Eng 9/2/04 10:01 AM Page 62
BN68-00733A-00_062-075Eng 9/2/04 10:01 AM P L Page 63 A S M A D I S P L A Y P A N E L Channel Control Fine Tuning Channels....................................................................
BN68-00733A-00_062-075Eng 9/2/04 10:01 AM Page 64 Fine Tuning Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. TV Channel Air/CATV Auto Program Add/Delete Fine Tune Scan Move 2 Press the ▲ or ▼ button to select “Fine Tune”, then press the ENTER button.
BN68-00733A-00_062-075Eng 9/2/04 10:01 AM P L Page 65 A S M A D I S P L A Y P A N E L Connecting a PC and Operation Connecting a PC..........................................................................66 Adjusting the PC Screen................................................................70 Changing the Position of the Image................................................71 Picture Quality Adjustment ............................................................72 Information .....
BN68-00733A-00_062-075Eng 9/2/04 10:01 AM Page 66 Connecting a PC Connection to a Macintosh computer may require an adapter. PDP Power Plug DVI Cable or Use a DVI-D connection cable. (sold separately) Audio Cable PC Cable Audio Cable DVI jack (The actual configuration on your PC may be different, depending on the model.) PC PC Connecting a PC (15p D-SUB) to the PDP 1 Connect a PC cable between the PC Output jack on the PC and the RGB input jack on the PDP.
BN68-00733A-00_062-075Eng 9/2/04 10:01 AM Page 67 Pin Configuration D-Sub Cable DVI-D Cable (Digital-Only Connector) • 15Pin Signal Cable (based on protruded pin) Setting up Your PDP (Plug and Play) Our adoption of the new VESA Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system, without the usual setup hassles and confusion.
BN68-00733A-00_062-075Eng 9/2/04 10:01 AM Page 68 How to Set up Your PC Software (Windows only) The Windows (MS Windows XP) display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
BN68-00733A-00_062-075Eng 9/2/04 10:01 AM Page 69 Notes Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Video Signal Resolution (Dot X Line) 640 X 350 640 X 400 640 X 480 IBM PC / AT Compatible 800 X 600 848 X 480 1024 X 768 Vertical Frequency(Hz) Horizontal Frequency(KHz) Vertical Polarity Horizontal Polarity 70.086 85.080 85.080 59.940 72.809 75.000 85.061 56.250 60.317 72.
BN68-00733A-00_062-075Eng 9/2/04 10:01 AM Page 70 Adjusting the PC Screen Adjusting the R.G.B Preset: • Press the TV/VIDEO button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move 2 Press the ▲ or ▼ button to select “Color Control”, then press the ENTER button.
BN68-00733A-00_062-075Eng 9/2/04 10:01 AM Page 71 Changing the Position of the Image After connecting the PDP to your PC, adjust the position of the screen if it is not well-aligned. Preset: • Press the TV/VIDEO button to select “PC.” 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC : English Move 2 Press the ▲ or ▼ button to select “PC”, then press the ENTER button.
BN68-00733A-00_062-075Eng 9/2/04 10:01 AM Page 72 Picture Quality Adjustment Picture Automatic Adjustment Preset: • Press the TV/VIDEO button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC Move 2 Press the ▲ or ▼ button to select “PC”, then press the ENTER button.
BN68-00733A-00_062-075Eng 9/2/04 10:01 AM Page 73 Coarse Adjustment Preset: • Press the TV/VIDEO button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC : English Move 2 Press the ▲ or ▼ button to select “PC”, then press the ENTER button.
BN68-00733A-00_062-075Eng 9/2/04 10:02 AM Page 74 Fine Tuning (Fine) Preset: • Press the TV/VIDEO button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC : English Move 2 Press the ▲ or ▼ button to select “PC”, then press the ENTER button. TV 3 74 4 5 Press the MENU button to exit.
BN68-00733A-00_062-075Eng 9/2/04 10:02 AM Page 75 Information Preset: • Press the TV/VIDEO button to select “PC”. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC Move 2 Press the ▲ or ▼ button to select “PC”, then press the ENTER button.
BN68-00733A-00_076-103Eng 9/2/04 9:59 AM Page 76
BN68-00733A-00_076-103Eng 9/2/04 9:59 AM P L Page 77 A S M A D I S P L A Y P A N E Time Setting Setting the Clock .......................................................................78 Setting the Sleep Timer...............................................................79 Setting the Timers ......................................................................
BN68-00733A-00_076-103Eng 9/2/04 9:59 AM Page 78 Setting the Clock 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC Move 2 Press the ▲ or ▼ button to select “Time”, then press the ENTER button. TV 3 Clock Sleep Timer On Timer Off Timer TV 12 Adjust 4 TV 12 Adjust Press the √ button to select “am/pm.”, then press the ▲ or ▼ button to select the proper time of day (am or pm).
BN68-00733A-00_076-103Eng 9/2/04 9:59 AM Page 79 Setting the Sleep Timer You can set your PDP to automatically turn off after a preset interval. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC ➤ Quick way to access the sleep timer setting: Just press the “SLEEP” button on the remote control. Move 2 Press the ▲ or ▼ button to select “Time”, then press the ENTER button.
BN68-00733A-00_076-103Eng 9/2/04 9:59 AM Page 80 Setting the Timers This PDP can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the PDP’s clock, as described previously. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC Move 2 Press the ▲ or ▼ button to select “Time”, then press the ENTER button.
BN68-00733A-00_076-103Eng 6 9/2/04 9:59 AM Page 81 Press the √ button to select “Channel”, then press the ▲ or ▼ button to select the channel you want when PDP turns on. TV On Timer Hour 12 Channel 7 Press the √ button to select “Volume”, then press the ▲ or ▼ button to select the volume level you want when PDP turns on.
BN68-00733A-00_076-103Eng 9/2/04 9:59 AM Page 82
BN68-00733A-00_076-103Eng 9/2/04 9:59 AM P L Page 83 A S M A D I S P L A Y P A N E Function Description Selecting a Menu Language .....................................................84 Digital Noise Reduction ...........................................................85 Selecting the Film Mode ...........................................................86 Setting the Melody Sound ........................................................87 Setting the Blue Screen..........................
BN68-00733A-00_076-103Eng 9/2/04 9:59 AM Page 84 Selecting a Menu Language 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC Move 2 Press the ENTER button to select “Language”. TV Move 3 TV 4 84 Enter Return : English English Français Español : On Enter Return Configuration Langue : Français English Heure Français Sous-titres Español Réduct. bruit num.
BN68-00733A-00_076-103Eng 9/2/04 9:59 AM Page 85 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC Move 2 Press the ▲ or ▼ button to select “Digital NR”, then press the ENTER button.
BN68-00733A-00_076-103Eng 9/2/04 9:59 AM Page 86 Selecting the Film Mode On: Automatically senses and processes film signals from all sources and adjusts the picture for optimum quality. Off: Switches off the Film mode. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. TV Picture Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move 2 Press the ▲ or ▼ button to select “Film Mode”, then press the ENTER button.
BN68-00733A-00_076-103Eng 9/2/04 9:59 AM Page 87 Setting the Melody Sound You can hear clear melody sound when the television is powered on or off. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC Move 2 3 Press the ▲ or ▼ button to select “Miscellaneous”, then press the ENTER button. Press the ▲ or ▼ button to select “Melody”, press the ENTER button.
BN68-00733A-00_076-103Eng 9/2/04 9:59 AM Page 88 Setting the Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen“ mode to “Off“. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM Page 89 Viewing Closed Captions Your TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign language translations. All VCRs record the closed caption signal from television programs, so home-recorded video tapes also provide closed captions. Most prerecorded commercial video tapes provide closed captions as well.
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM Page 90 Using the V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. Note: When the V-chip feature is activated, the PIP and auto channel program features do not function. Setting Up Your Personal ID Number (PIN) 1 Press the MENU button.
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM Page 91 How to Enable/Disable the V-Chip 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. TV Setup Language Time Caption Digital NR V-Chip Miscellaneous PC Move 2 Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4-digit PIN number.
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM Page 92 How to Set up Restrictions using the “TV Parental Guidelines” First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
BN68-00733A-00_076-103Eng 5 9/2/04 10:00 AM Page 93 At this point, one of the TV-Ratings is selected. Press the ENTER button. Depending on your existing setup, a symbol will be selected. (Blank = Unblocked, = Blocked) While “ ” is selected, press the ENTER button to block or unblock the category. To select a different TV-Rating, press the ▲ or ▼ button and then repeat the process.
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM Page 94 How to Set up Restrictions using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings). 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM Page 95 How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: 1 Press the ENTER button. Received Rating : TV-PG This channel is blocked by V-Chip. Press ENTER to unblock. OK Change 2 Enter your PIN number. This channel is blocked by V-Chip. Enter PIN to unblock.
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM Page 96
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM P L Page 97 A S M A D I S P L A Y P A N E L Appendix Troubleshooting............................................................................98 Care and Maintenance ................................................................99 Specifications ............................................................................
BN68-00733A-00_076-103Eng 9/24/04 11:24 AM Page 98 Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center. Problem 98 Possible Solution Poor picture. Check all wire connections. Your Remote control does not operate the PDP. Press the “TV/VIDEO” button to put your remote control in the “TV” mode. The PDP won’t turn on. Check if the power plug is connected.
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM Page 99 Care and Maintenance With proper care, your PDP will give you many years of service. Please follow these guidelines to get the maximum performance from your PDP. Identifying Problems • • • • Do not put the PDP near extremely hot, cold, humid or dusty places. Do not put the PDP near appliances that create magnetic fields. Keep the ventilation openings clear. Do not place the PDP on a rough and slanted surface, such as cloth or paper.
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM Page 100 Specifications Exterior design and product specifications are subject to change without prior notice to improve the performance of this product. PL-42D4S Model Dimensions Display 1028 (W) X 86.4 (D) X 685 (H) mm (with stand) Weight Display 33.
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM Page 101 Memo 101
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM Memo 102 Page 102
BN68-00733A-00_076-103Eng 9/2/04 10:00 AM Page 103 Memo 103
BN68-00733A-00_001,104Eng 9/2/04 10:08 AM Page 2 BN68-00733A-00
