instructions AA6B [}1,113AtEN6)
l Warninq Safety ! Important Instructions CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. dangerous to make any kind of contact with any inside part of This symbol indicates high voltage is present inside, It is this product.
Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung Projection TV represents the latest hi television technolog]t We designed it with easy to use on screen menus and dosed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come. Important Safety Information Always be careful when using your TV receiver.
• Protect the power cord. Power supply cords should be routed so that they won't be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, con venience receptacles, and the point where they exit from the unit. • Unplug the TV from the wall outlet and disconnect the antenna or cable system during a light ning storm or when left unattended and unused for long periods of time. This will prevent dam age to the unit due to lightning and power line surges.
FCC User Information Inst_uctions The Federal Communications Commission Radio Frequency Interference Statement includes the fbllow ing warning: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pur suant to Part 15 of the FCC Rules.
CONTENTS Chapter ] 1: Your New TV ............... List of Featuzes ......................................... Familiarizing Yuursetf with Yuuz New TV ..................... Front Pane[ Buttons .............................. Front Pane[ Jacks ................................ Rear Pane[ Jacks ................................. Remote Chapter Control 2: Installation ................................. ................ Connecting VHF and UHF Antennas ........................
CONTENTS Chapter 3: Operation Sound Control Chapter (Cont.) .......... 3.14 ......................................... 3.16 Adjusting the Vulume ............................. Using Mute ..................................... Customizing the Sound ........................... Using Automatic Sound Settings .................... Setting the Clock ....................................... Option 1: Setting the Clock Manually ................
YOUR NEW TV List of Features Your Samsung TV was designed with the latest tecbnoloz_v This TV is a high perfurmance unit that includes the following special features: Easy to use remote control Easy to use oil screen menu system Automatic timer to turn the TV oil and off Adjustable picture Automatic channel tuning for up to 181 channels and sound settings A special filter to Feduce or eliminate Fine tuning control reception fur tile sharpest A built in multi channel Built in, dual channel
I Your NEw TV Familiarizing Front Panel Yourself with The TV Buttons The buttons on the front panel control your TV_ basic features, including the on screen menu. Tt_ use the more advanced features, you must use the remote control. y ii i 0 Remote Control Sensor Aim the remote control towards this spot on the TV. 0 MENU Press to see an on screen menu o[ your TV's 0 TV/VIDEO Press this button to display a menu of all the avail able signal sources.
Your NEw TV ] Front Panel You can use the fzont occasionally, equipment, such Jacks pane[jacks as a camcozdez see pages 2.1 A/V component to connect an oz video game. that is used only (Foz information oil connecting 0 • 2.8.) I ...... 0 PERFECT 0 a • FOCUS 0 AUDIO INPUT jacks Use to connect the audio signals from a cam corder or video game. 0 S-VIDEO INPUT jack Use to connect an S-Video signal from a cam corder or a video game.
Your Rear NEw TV Panel ] Jacks Use the zear parle] jacks to connect an A/V component ously, such as a VCR or a DVD player. Because theze are two sets of inputjacks, (i.e., a VCR and a DVD, 2 VCRs, etc.) For more inf_rmation oil connecting that will be connected you can connect equipment, two different see pages 2.1 conthlu A/V components 2.8.
Your NEw TV Remote Control Yuu can always ] use the point remote it directly control up to about 23 feet from the T_ You can also use your remote control for details. to operate Turns the TVon and off, O the remote, MODE Selects a target device to be con trolled by the Samsung remote control (i.e., TV,VCR,Cable box, or +100 Press to select channels over 100. For example, to select channel 121,press" +100," then press" 2" and" 1." using your VCR and cable box. See page 4.
I Your NEw TV Remote Control (continued) ANT A/B Press to select the ANT A or ANT V.chip Press to set up and activate the parental locks. B, @ R.surf Press to automatically return to a preferred charnel after a user preset time delay. Used during set up of this Samsung remote control, so that it will work compatibly with other devices (VCR,cable box, DVD.) S.Mode Adjust the TV sound by selecting one of the preset factory settings (or select your personal, cus tomized sound settings), P.
INSTALLATION Connecting VHF and UHF Antennas If youz antenna has a set of leads that look like this, see "Antennas with 300 ohm Flat _vin Leads," below. If youz antenna has one lead that looks like this, see "Antennas with 75 ohm Round Leads," oil page 2.2. If you have two antennas, VHF and UHF Antennas," Antennas with see "Separate oil page 2.2. 300-ohm Flat Twin Leads If' you aze using an off air antenna (such as a zoof antenna ohm twin fiat leads, follow the dizections below.
INSTALLATION Antennas ] with 75-ohm Round Leads Plug the antenna lead into the ANTRAor ANT-B terminal on the rear Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the FM This procedure requh-es a an optional combiner-adaptor (available at most electronics shops).
INSTALLATION Cable with ] a Cable box that Descrambles All Channels 1 connected[ind the cabletothethatis NT NNA T rmn A E 0 U te a on yourcable box,This terminalmightbe _r_ CoaRect the other end of ths cable to the ANTRA or ANT-B terminal on the rear of the TV, Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles orgy some channels (such as premium channels), fullow the instructions below.
] INSTALLATION Connect a coaxial cable betweentheANTENNA . OUT terminal on the cable box and the B_IN terminai on the A/B r_[_lFI _1 I_ Incoming Cableg _ Splitter _ RF(NB) Swffch CableBox Connect another cable between the other OUT _ terminal on the splitter Incoming and the A* IN terminal on the RF(A/B) switch.
INSTALLATION ] Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions oil pages 2.1 2.3). Skip step 1 if you have not yet connected to an antenna or a cable system. TV RearPanel Connect a coaxial cable between the ANTENNA OUTterminal on the VCR and the antenna terminal on the IV. A coaxial _VCR cable Ifilot.
I I Connecting a Second VCR Your TV can send out signals this, connect your second to Record of its picture from and sound the TV to he recorded by a second VCR. To do VCR as follows: l'V Rear Panel Connect a set of audio cables between the AUDIO OUTjacks on the TV and the AUDIO INjacks on the VCR.
INSTALLATION ] Connecting The rear pand jacks a DVD on your (480i, TV make 480p) it easy to connect Player a DVD player to your Connecting Y, P., P.
INSTALLATION ] Connecting a DTV When switching according to the to the DTV mode, input signal. Note: Only 480p and 1080i formats Set-Top either dS0p Box oi- 1080i format (480p, 1080i) is automatically selected are supported. TV RealPanel Connect a set of audio cables between the DTVSet:top Box audio injacks on the [V and the AUDIO OUTjacks on the DTVSet:top box_ 2 To enable Component video viewing. connect video cables between the Y. Ps. and PJ_inputs on the [V and Y,Ps.and P_ (or Y.
INSTALLATION Installing ] Batteries in the Remote Control Make sure to match the "+" and "--" ends of the batteries diagram inside Remove them with the batteries and store in a cool, dry place be using the the compartment. the remote if you won't control for a long time. The remote control can be used up to about 23 tbet from the TV.
OPERATION Turning the TV You can also use the POWER Plug & Play On button and Off on the fl'ont panel. Feature When the TV is initiaI[y powered 01-1, five basic customer settingsproceed automatically and subsequently: Setting the language, Setting the Clock, Setting the Antenna, Ant. hlput cheek, and Auto program. 1 i Press the POWERbutton on the remote control.
OPERATION ] 4Move thejoystiek Ieft or right to select"A" or" B" _ .................................... /_ -_ Press the Menu button to enter the Antenna Setting, andthen_Ant. Inputcheck" j_ Fr,.O._._ mr_.o _m. is automatically displayed, _'_'_ ;_ ]_J Make sure that the antenna is connected to the TV, Then move the joystick left -- _ -_Y 4 ® _'_ o_. ®_ Autopragmm ANT 4 ANT 12 or right to activate i'AutQ Program"or press Menu to skip. When you have finished, press the Menu button.
] OPERATION Using When the the picture Perfect size is distorted Focus after moving Feature the TV set, use the Perfect Focus feature to adjust for the optimum picture size set in the Factory. Press the IVlemabutton Movethejoystickdownto seect"FUNCTON ,then pressthnjoystmktoenter, _.. ' ._ _ m,_&P_,v __Jr_ J] _p ; Move thejoystick down to select '!Convergence", then press thejoystick to enter.
OPERATION ] Adjusting Manual Convergence If' the color appears spread out or "smeared" alignment. Be sure to use the remote control on the screen, the convergence probably for tile convergence adjustments. First steps: 1 ® Press the Menu button, j Move thejoystick down to L,.UU_, select ?FUNCTION",then press t_ejoYstick tOenter. i RUg &PI_ _ _ _ e.g_ ) _ CMmm [_Ent. le4m_J 2 Move thejoystick down to seiect" Convergence", then press theJoystipkto enter.
] OPERATION Adjust Red Convergence 4 _ While _Red" is highhghted, press the um mm0m _1 _d joystick to enter: A crosshair pattern wtJI appear on the screen. Move mejeystick up/down/left/right ro se ect wnere to aojusi Convergence. [ a horizontal CHA 4€F ple_e red Iine is vis hie use ano 6HV buttons Po=i_n ucR)mm 0:I_B _ IJ_ mMenu =m rerno_ corm_ Red to move the Itne So that i[ is SUDermmBoseo cthe horizontal center*Itne (i.e..
OPERATION Viewing Viewing ] the the Menus and On-Screen Displays Menus -,9 1 The on-screen f_'om the screen With the power on, press the Menu buttor _I 8atNn_ C_lor T_S 4 4Cugtaz NOrmal menus after thirty disappear seconds. p Con_'nt The PICTUREmenu 8ha,l_m appears on me screen, its left side has five icons: PICTURE SOUND CHANNEL :UNCTION and DOUBLESCREEN @Move _ BBMDnL 2 Usethejeystick(up ane aown m me move imms in me menu ime ICONSDIInKwhen mghitghted). Usejoystick (teft.
] OPERATION Selecting 2 a Menu Language ¸¸ Move thejoystick down to select _Language", then move thejoystick to the left or right to select the lain Press the Menu button to exit, Selecting the .......................................................................... Antenna Input You can connect to two different signal souzces by choosing the antenna input (Antenna A or Antenna B). 1 Press the Mene button.
OPERATION ] Memorizing the Channels Your TV can memorize and store all of the available channels for both "off' air" (antenna) and cable chanrle[s. After the available channels are memorized, use the CH A and CH V but tons to scan through the channels. This eliminates the need to change channels by entming the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
] OPERATION Storing Channels in Memory (Automatic Method) 1 First, select the correct signal source (ANT, SrD, HRC,tRC).See steps lv2 on previous page. Press the Menu button. Move the joystick down to select ?CHANNEL"_then ........................... press thejoystick to enter. Move thejoystick down to select !Auto Program", then press thejOyStiCk GO enter.
OPERATION ] Changing Using the Channels Channel Press the 6HA orOHV Buttons button tOchange channe!s: When you press CHA or CHv, nels that the TV has memorized. not see channels that were either Using the Number Use the number buttons the TV changes channels in sequence. You will see all the chan(The TV must have memorized at least three channels.) You will erased or not memorized. Buttons to quickly tune to any channel. Press the number buttons to go directly to a ¢hannel.
] OPERATION Selecting Your Favorite Channels You can store up to ten of your favorite channels for each available input source (such as TV and CATV). Then, when you press the Fav.CH button oil the remote control, the TV displays only the favorite channels you previously stored, allowing you to quicMy and easily find fre quently watched channels.
OPERATION Setting ] the Blue Screen Mode If' no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If' you wish to continue Viewing the poor pic ture, you must set the "Blue screen" mode to "Off". 1 Pressthe Menubutton. J_] iiii_ Movethejoystickdown to select" CHANNEL", then pressthejoystickto enter. Auto Pi_lwa _i R..Tn /_,q L_l.. 17_!1 _.._, _l .,_MOVeO_.
] OPERATION Labeling the Channels Use this featuze to assign an easy to remember label to any channel (i.e., "CBS", "ESPN", "PBS2", CNN 12 etc.) A tabe[ consists of' fouz fie]ds, where each fie]d is a ]etter, a num bez, "_", oz a blank. When the DISPLAYbutton is pressed, the channel label will appear next to the channel numbez.
OPERATION Picture ] Control You can use the on screen menus to change the contrast, brightness, tint, color, and sharpness according to personal preference. (Alternatively. you can use one of" the "automatk" settings. See next page.) Customizing the Picture Press the Menu button. _,,_r_ / The"PICTURE" iconwitI _1 be highlighted (starts _ blinking), then press the _1 .... jOyStiCk tO e.te[. _I _r_ut _=_= :_ it IZZZ c_r CMO_ ,_.
] OPERATION Using Automatic Picture Settings Yuur TV has two automatic picture settings ("Standard", "Dynamic" and "Mild") that are pre set at the factory. Yuu carl activate either Standard, Dynamic or Mild by pressing EMode (or by making a selection from the menu). Or, you can select "Custom" which automatically recalls your personalized picture settings. 1 Press the Menu button, PICTUREicon witt be /_{ _" highlighted (blinking). i_ _ Press thejoystick to enter, / i l_J , .
OPERATION Selecting ] the Color Tone Press the Menu button. The _ PICTURE"icon wiiI be highlighted (starts bIinking), Then press the joystick to enter. Move thejoystick down to select" Cotor [one" : i i i ................. _'!ZZZXZZXZZXZZXZZXZZX! i Move thejoystick to the left or right to select" Norrnali' Warm," or _Cool," Press the Menu button to exit. Sound Control Adjusting the Volume Press the VOL_ or VOL+ buttons Using to increase or decrease the volume.
] OPERATION Customizing the Sound You can use the oil screen menus to adjust the bass, treble, and balance according to individ uai pret>rence. (Alternatively, you can use one of the "automatic" setthlgs. See next page.) Move the joystick down to select _SOUND" i then press thejoYstic _ to enter: ...........................................................................................................................................................
OPERATION Using ] Automatic Sound Settings Yuur TV has four automatic sound settings ("Standard," "Music," "Speech," and "Movie") that are preset at the factor_ You can activate any of them by pressing the S.Mode button (or by making a selection from the on screen menu). Or, you can select "Custom," which automatically recalls your personalized sound settings. Press the Menu button.
] OPERATION Setting the Clock Setting the clock is necessary you can check the time while in order watching to use the various timer features the TV[ (Just press Display) Option Clock Manually 1: Setting the of' the TV. Also, Press the Menu button Movethejoystickdownto select ° JUNCTION", then pressjoyst Ck tO enter. _i _ _g_'_NR _ _lp _ 4"0_ : l< :2 Move thejoystick down to setec[ Time" tnen 3tess the joystick to enter.
OPERATION Option ] 2: Using the Local PBS Channel to Automatically TV Clock 1 Press the Menu butto_ MovejoysncK aown [o select "FUNCTION . men press thejoysncK to enter, 2 Move the joystick down to select "T_me" tne press the joysuc* [o enter. Move the joystick to the Ieft or r_gn[[o se_ecl "Auto" . 3 ' m Move thejoystick down to select" PBS channel".
] OPERATION Selecting a Signal Source (External A/V) You must select the appropriate mode in order to view the VCR or Carncorder signal on the TV Make s_re that the remote control is control ling the TV set, (Pressthe MODE button and make sure that the _TV'I LEDis illuminated,) 2 w ¸ Pressthe 11//Videobut* ii_ ii i =o=7,7777777777777777777777777771 ¸3¸¸¸¸¸ //? Movethejoystickup or down to highlighta par, ticutarsignalsource,and thenpressthejoystick to enter, _dQOl ;tot c¢lme_Uld Not oonnegt
SPECIAL FEATURES Fine Tuning Use fine tuning Channels to manually adjust a particular channel for optimal reception. 1 Select the aooroDrla[e channo F_,. Chlm_ FIm_lntl Press the Menu button k t Nue_ Move the joystick down to select "CHANNEL" O0 F 4 Off b OMI_II 4F,_IIL HM_U then press the joystick [o en[el_ 2 Antares Move the joystick down [o select" Fine Tune, 4 ANT_.AW F FIW. _ F nee Tue_ 4 _ =MO_O A 4MITF AutoPm_em 0_.
SPECIAL FEATURES Digital ] Noise Reduction If' the broadcast signal received by your TV is weak, you carl activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. z ¸ 1 ( Press the Menu button. Move thejoystick down to select" FUNC[{ON", then press the joystick 2 ( Move thejoystick down to select" Digital NE i i .........
SPECIAL FEATURES Changing ] the Screen Size Press the Aspectbutton tO change the screen, Normal • Normal: • Zooml: • Zoom2: Zoom1 Zoom2 Sets the picture to 4:3 normal mode. Magnifies the size of the picture on screen. You can also move the picture on screen using the joystick Magnifies the size of the picture more than Zoom1. You can also move the picture on screen using thejoystick up or down. up or down. Notes: Screen size cannot be changed in the PIP mode.
SPECIAL Using FEATURES the I R.surf feature This feature aRovv,s you to set the TV to return to a particular channel after a certain amount of' time. For example, you may be watching a channel when commercials start. You can set the R.Surf to "5 minutes", then svv,[tch channels. After 5 minutes, the TV will return to the original channel To use the R.surf: White you are watching the channel to which you want to return, press the ILsurf button. The onscreen display wil! read _Suffoff" : Press the P.
SPECIAL FEATURES Setting the ] On/Off ]_mer -_ Before using the timer, you must set the TV's clock. (See "Setting the Clock" on page 3.19) Press the Menu button. Move the joystick down to select _FUNCTION", then When press thejoystick to enter. "Timer" any of the timers are set, the LED will illuminate (front panel of TV). iz /)£ Press the joystick to enter ) i¸ "Fimo Move thejoystick to the leftorrighttoselectclock _4 s..
I SPECIAL FEATURES I -,11 r15 deactivate 5 select Move me joystick to the right to highlight "On/Off' then move the joystick up or down to select" On or off' Cl_k the "On time," "Off" during this step. 11:_ When finished move [ne joystick to the riga[ 6 fo set the Offtime move thejoystick down to highght" Off time Move the joystick I_0IT_ne --:-- am_ to the i_ _Pq4. OM_ _MBnu rlgn[ 8RG Set I_e hours ann minutes, 'Follow the same proceaure as trl steps 1-5 above.
SPECIAL FEATURES Dolby W_e ] Surround _O_y Su_0u_d Dolby Pro P_ (PCL545R) _0g[_ 0p_ _]_rs yOU to e_ _g_a_ls 1_ SU_0u_ S0U_, Logic Dolby Pro Logic wilt provide you with fu[[ surround program sources. For best results, look for programs lowing logo: I_D[DOLBYSURROUND] sound from Dolby Surround and movies that are marked -_1 Quick 1 way to access dolby sur- round mode: Simply press the "Surround" button on the remote Press the Menu button control.
SPECIAL FEATUP,ES Choosing ] a Multi-Channel Sound (MTS)track Dependhlg on the particular program being broadcast, you can listen to stereo, mono, or a Separate Audio Program. (SAP audio is usually a foreign language translation. Sometimes SAP has unrelated information iike news or weather.) -ql 1 Quick way to access the MTS menu: Just press the "MTS" button on tile remote control.
SPECIAL Auto FEATURES ] Volume Each broadcasting station has its own the volume every time the channel is the volume of the desired channel by is high or by raising the sound output 1 Press the Menu button, Move thejoystick down to select" SOUND" Tner Bless me joystick to ente£ Move the joystick down to select" Auto Volume", then move thejoystick to the lee or right to select" On," Or _Off." Press the Menu button to exit, 49 (.
SPECIAL FEATURES Viewing Closed 1 Captions Your TV decodes and displays the closed captions These captions are usuMly subtitles for the hearing lations. All VCRs record the closed caption signal ed video tapes also provide closed captions. Most vide closed captions as well. Check for the closed and on the tape's packaging: [_. that are broadcast with certain TV shows.
SPECIAL FEATURES Viewing Picture-in-Picture You can use the Activating ] PIP feature to simultaneously watch two video sources. Picture-in-Picture Quick way to access 1 Press the Menu button. Movethej0ystickdown tO _1 _l Se'ect° PtF' then press thejoysticktoenter. _i '_, 'M_,_ -ql if you turn TV offwhile watching and turn it on again, 2 Move thejoysucK the PIP menu: Simply press the "PIP" but_ ton on the remote control. m PIP window the will disappear.
SPECIAL FEATURES Selecting I a Signal Source (Antenna or Cable) for PIP I Press the Menu button, Move the joystick down to select _ P{P" rnen cress thejwstick to enter.
SPECIAL FEATURES Swapping the ] Contents of the PIP Image and Main Image _1 Quick way to access swapping: Simply press the "Swap" button on the remote control.
SPECIAL FEATURES Changing the ] PIP Channel -,111Quick way to access PIP CI 1: Simply press the (PIP) "C][]" button on the remote control. Move thejoystick down to select" Channel," then move thejoystick to the left or right to change the channel that appears in the PIP window, Press the Menu button to exit. Note: The PiP channels are not available when RF is set to ANTB. (The PIP channels hnk to ANT A).
SPECIAL Using FEATURES ] the V-Chip The _Chip feature automaticaRy locks out programming that is deemed inappropriate for children. The user must first enter a PIN (personal ID number) before any of' the VChip restrictions can be set up or changed. Note : When the Vchip function. Setting Up Your %ature is active, the PIP and channel Personal ID Number Quick menu: button Press the Menu burton.
SPECIAL How FEATURES to I Enable/Disable the V-Chip 1 Press the Menu button. L_ Move the joystick down to select"FUNCTION," then press thejoystick tOenter. 2 _n _,_ _NR b_ m_a_ ¢_._.pr_ 4 E._ O. __ : Move thejoystick down to select"V-Chip," then press !bejoystick to enter. The _Enter Pin" screen will appear. Enter your 4,digit The "V-Chip Mode" screen wilI appear, and "V-Chip Lock" w it be highlighted, TOenable the V_Chipfeature, move thejoystick to the right so that the ?V_ChipLock" .....
SPECIAL FEATURES ] Move the joystick down to select _V-Chip," then press thejoystic k to enter. ]he" Enter Pin" screen wit{ appear, Enter your 4_ digit PiN number, ....................................................................................................................
SPECIAL FEATURES I 6 HOWto set the FV,D, L S and V sub-ratings. First. ntgmtght one of these TV*Ra[mgs:TV-YT. [V-PC fV_14 or TV*MA fSee Step 4, Dnprewous pageJ Next while the TV-Rating ts htghhghted, repeatedly move thejoystick to the right, This will cycle mrougn me ava,_* ante sun-raungs fF_L, S.
SPBCIAL FEATURES The "V-chip Mode" screen wilI appear, Move thejoystick down to highlight" MPAA Rating," press thej0ystick 1o enter, ] / Wou_m,_ ii_iiJi The _MPAA rating" screen will appear. MPAA category. Moving thejoystick up or down will cycle through the MPAA categories: G Generalaudience (no restrictions). PG Paren!a !guidance sugges!edr .PG-13 PG13(Parentsstrong!ycau!!oned): .
SPECIAL FEATURES ] Customizing Your TV comes controlling if your equipped the TV, VOR and Setting Your Up 9_,rjth a "unNersaI" the universal cable Remote box Your remote are made Remote remote Control control. can also operate by manufacturers Control In addition a VCR, other to Operate to DVD and cable box thai] (even Samsung).
SPECIAL FEATURES Setting Up Your ] Remote Control to Operate Your Cable <1 The remote "modes": "TW' Press the MODEbutton and make sure that th_ Cable LEDis ilIuminated. Box control "VCR," has fuur "CABLE", and "DVD." Press the "MODE" the remote control mode. button to switch to the "Cable" Onyour Samsung remote control, press SET. Make Enter 3 digits of the cable box code Iieted below for Your brand of cable box. sure you enter 3 digits of the code, even if the first digit is a "0.
SPECIAL VCR FEATURES ] Codes Admiral Aiwa 006, 079 015 Akai 017, 022, 023, 027, 030 Audio Dynamics Bell & Howell Broksor_ Candle Cannon Citizen Colortyme 014, 016 002 010 007,009, 007,009, Crai8 Curt_Mathes Daewoo DBX Dim.
TROUBLES}lOOTING If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center. Identifying Problems Problem Possible Poor picture. Try another channel. Adjust the antenna. Check all wire connections. Poor sound qualit3< Solution Try another channel. Adjust the antenna. No picture or sound. Try another channel. Press the TV/Video button. Make sure the TV is plugged in.
APPENDIX Cleaning and Maintaining Your TV With proper care, your TV unit will give you many years of"service. Please follo_ V these guidelines to get the maximum performance from your TV_ Placement Do not place the TV near extremely hot, cold, humid oi- dusty places. Do not place the TV near appliances with electric motors that create magnetic fields, such asvacuum cleaners. Keep the ventilation openings clear; do not place the TV on a soft surface, such as cloth or paper.
