Technical data

7. Client/Server interface imond
– Colors: Define the main colors for the Traffic Information window. It should be
taken into account that the DSL channel and the first ISDN channel will be assigned
the same color value.
– Limits: Set the maximum transfer values for DSL here - upload and download.
• The syslog area is used to configure the display of syslog messages.
– Activate Syslog-Client: Should imonc display syslog messages? This option be
switched off if an external syslog client (for example Kiwi’s Syslog Client) is used.
– Show All Messages From: Messages should be shown from which priority on? It
makes sense to start with debug priority to see which messages are interesting for
you. After that you may set the priority to your preferance.
– Save Syslog Messages To A File: Should syslog messages be saved to a file in addi-
tion? Choose the messages to be logged to the file in the groupbox. The following
placeholders are present:
%y – will be replaced by the current year
%m – will be replaced by the current month
%d – will be replaced by the current day
– Show Port Names: Should we display port names instead numbers?
– Firewall-Messages In User Mode: Specify here whether Firewall Messages should
also be shown in user mode or not.
• The Fax Area serves to configure Fax display in imonc. This area only appears if mgetty
resp. faxrcv are installed on the router (OPT- packages on fli4l’s homepage).
– Fax Logfile: The filename set here is used to save Fax lists locally.
– Local Directory: To display Faxes they have to be stored locally. Set the directory
destination for this option here.
– Actualization: There are two different ways for imonc to recognize a new Fax that
has been received. Either imonc monitors the syslog messages (the syslog-client in
imonc must be activated then) or it checks the lofiles in intervals. Prefer the first
option if possible. If using the second option you may specify the time interval to
actualize the page Fax overview. Note that this setting is not given in seconds but
will be multiplied with the setting in Common/Actualization interval.
• The area grids serves for adapting the tables in imonc to your own needs. Set for each
grid which colums should be shown and for grids in the area calls, connections and Faxes
since what time the infos should be displayed.
7.2.5. Calls Page
The calls page is only dsiplayed if the configuration variable TELMOND_LOG is set to ‘yes’ because
no call log exists otherwise. All incoming calls that were logged while the router was working
are displayed on this page. You may choose between viewing calls saved locally or on the
router. When clicking on the reset button while reviewing the calls saved on the router the
logfile there will be erased.
278