Technical data

7. Client/Server interface imond
the commands there another one exists: timesync. If used imonc will synchronize the
clock of the client with the router’s clock. The command dialtimesync is not supported
anymore, it is substituted by "dial; timesync".
• /d:”fli4l-Directory” Pass the fli4l-directory as a start parameter. May be of interest when
using more than one fli4l version.
• /wait If the hostname can’t be reolved imonc will not exit anymore – start another try
by doubleclicking the tray icon.
• /nostartcheck Disables checking of imonc already running. Only makes sense to monitor
several different fli4l routers in a net. When using more instances the builtin syslog- and
E-Mail-capabilites will be disabled.
Usage (to be entered in the link):
X:\...imonc.exe [/Server:Host] [/Password:Password] [/iport:Portnumber]
[/log] [/tport:Portnumber] [/rc:"Command"]
Example with IP address:
C:\wintools\imonc /Server:192.168.6.4
or with name and password:
C:\wintools\imonc /S:fli4l /P:secret
or with name and password and router command:
C:\wintools\imonc /S:fli4l /P:secret /rc:"dialmode manual"
7.2.3. Overview
The Windows client queries some imond information on the existing connections and displays
it in its window. In addition to general status information such as uptime of the router or the
time (both locally and on the router), for each existing connection the following informations
are shown:
Status Connection establishment/Online/Offline
Name Telephone number of the caller or circuit name
Direction Indicates if a connection is incoming or outgoing
IP IP, that was assigned to the router
IBytes Bytes received
OBytes Bytes sent
Online time Actual online time
Time Sum of all online times
KTime Sum of all online times in consideration of charge in-
tervals
Cost Computed costs
The data is updated every 2 seconds by default. In the context menu of this overview it
is possible to copy the assigned IP to the clipboard as well as hanging up the channel (for
272