Technical data

4. Packages
If the file is deactivated WPS clients using it can not connect to the Access Point anymore.
WPS-Clients connected with deactivated file are not affected.
Default setting: WLAN_x_PSKFILE=’yes’
WLAN_x_BRIDGE As an alternative to package ADVANCED_NETWORKING you may
specifiy the bridge to which the WLAN should be bound here.
Example: WLAN_x_BRIDGE=’br0’
Attention: Use either ADVANCED_NETWORKING or this setting and not both!
4.23.2. Examples
Connecting to an Access Point via WPA
OPT_WLAN='yes'
WLAN_N='1'
WLAN_1_MAC='00:0F:A3:xx:xx:xx'
WLAN_1_ESSID='foo'
WLAN_1_MODE='managed' # connection to an Access Point
WLAN_1_CHANNEL='1'
WLAN_1_RATE='auto'
#
# WPA Configuration
#
WLAN_1_ENC_N='0' # no WEP
WLAN_1_WPA_KEY_MGMT='WPA-PSK' # WPA pre shared key
WLAN_1_WPA_TYPE='1' # WPA 1
WLAN_1_WPA_ENCRYPTION='TKIP'
WLAN_1_WPA_PSK='your best passphrase choice ever (16-63 characters)'
#
# irrelevant in WPA context
#
WLAN_1_ENC_N='0'
WLAN_1_ENC_ACTIVE='1'
WLAN_1_ACL_POLICY='allow'
WLAN_1_ACL_MAC_N='0'
Access Point with WPA2 Encryption
OPT_WLAN='yes'
WLAN_N='1'
WLAN_1_MAC='00:0F:A3:xx:xx:xx'
WLAN_1_ESSID='foo'
WLAN_1_MODE='master' # Access Point
WLAN_1_CHANNEL='1g' # Channel 1, Mode 'g' on an
# Atheros card
WLAN_1_RATE='auto'
#
# WPA Configuration
#
WLAN_1_ENC_N='0' # no WEP
WLAN_1_WPA_KEY_MGMT='WPA-PSK' # WPA pre shared key
238