Technical data

4. Packages
Dial-in data of some german providers
Provider APN Username Password
T-Mobile internet.t-mobile arbitrary arbitrary
Vodafone web.vodafone.de arbitrary arbitrary
E-Plus internet.eplus.de eplus gprs
O2 (Vertragskunden) internet arbitrary arbitrary
O2 (Prepaid-Kunden) pinternet.interkom.de arbitrary arbitrary
Alice internet.partner1 arbitrary arbitrary
UMTS_DIALOUT Default setting: UMTS_DIALOUT=’*99***1#’
Dialing parameters for the connection
UMTS_GPRS_UMTS Default setting: UMTS_GPRS_UMTS=’both’
Which transfer mode should be used
Possible values (both, gprs, umts)
UMTS_APN Default setting: UMTS_APN=’web.vodafone.de’
UMTS_USER Default setting: UMTS_USER=’anonymer’
UMTS_PASSWD Default setting: UMTS_PASSWD=’surfer’
Specify data needed for dial-in.
Set username and password for the provider used. UMTS_USER is the username,
UMTS_PASSWD the password.
Name of the APN (Acess Provider Node) for some german providers
• http://www.teltarif.de/mobilfunk/internet/einrichtung.html
UMTS_NAME Default setting: UMTS_NAME=’UMTS’
Set a name for the circuit here - maximum 15 chars. It will be shown in the imon-client
imonc. Blanks are not allowed.
UMTS_HUP_TIMEOUT Default setting: UMTS_TIMEOUT=’600’
Specify a hangup time in seconds here if no traffic is detected over the UMTS connection.
A timeout ’0’ is equal to no timeout.
UMTS_TIMES Default setting: UMTS_TIMES=’Mo-Su:00-24:0.0:Y’
Times mentioned here determine when the circuit becomes active and at what costs. This
allows to use different circuits and default routes at different times (Least-Cost-Routing).
The daemon imond will control routing.
UMTS_CHARGEINT Default setting: UMTS_CHARGEINT=’60’
Charge-Interval: Timespan in seconds, that will be used for calculating online costs.
UMTS_USEPEERDNS Default setting: UMTS_USEPEERDNS=’yes’
Use the provider’s DNS server or not.
229