Technical data

4. Packages
Figure 4.4.: Detail view of a connection (Keymanagement)
Log: last 20 lines of the connection logfile. If more lines should be displayed enter the number
and click ’show’. If ’all’ is selected the whole logfile will be shown. This tab is only shown
for started connections.
Debug-Log: Shows the output of the start process. OpenVPN connections are started and
the output is shown. This is handy if the connection can’t be started by the start button
and no normal log can be shown. This tab is only shown for connections not started.
Packet filter: Shows the configuration of the the packet filter relevant to this connection.
Packet filter is only configured if the connection is started and configured as a tunnel.
Bridge: Shows the configuration of bridges on the router. Tab is only shown if the connection
is configured as a bridge.
Configuration: Shows the configuration generated on boot for this connection.
Keymanagement: Creates a key for the connection and makes it available for download (see
figure 4.4). If no key is present on first start it will be generated and displayed auto-
matically. You may download it via the corresponding symbol or copy/paste it to a text
file. To save a newly generated keyfile on the router click the disk symbol. Saving can
be undone by clicking the restore symbol.
179