Technical data

4. Packages
OPENVPN_x_COMPRESS Default see: OPENVPN_DEFAULT_COMPRESS
See OPENVPN_DEFAULT_COMPRESS (Page 169). In contradiction to the default setting this
setting only affects the OpenVPN connection mentioned.
OPENVPN_x_CREATE_SECRET Default see: OPENVPN_DEFAULT_CREATE_SECRET=’no’
See OPENVPN_x_SECRET (Page 164). In contradiction to the default setting this setting
only affects the OpenVPN connection mentioned.
OPENVPN_x_DIGEST Default see: OPENVPN_DEFAULT_DIGEST
See OPENVPN_DEFAULT_DIGEST (Page 170). In contradiction to the default setting this
setting only affects the OpenVPN connection mentioned.
OPENVPN_x_FLOAT Default see: OPENVPN_DEFAULT_FLOAT
See OPENVPN_DEFAULT_FLOAT (Page 170). In contradiction to the default setting this setting
only affects the OpenVPN connection mentioned.
OPENVPN_x_KEYSIZE Default see: OPENVPN_DEFAULT_KEYSIZE
See OPENVPN_DEFAULT_KEYSIZE (Page 170). In contradiction to the default setting this
setting only affects the OpenVPN connection mentioned.
OPENVPN_x_ISDN_CIRC_NAME Default OPENVPN_x_ISDN_CIRC_NAME=”
Specifies on which ISDN circuit the OpenVPN connection will be established. Enter the
name of the ISDN circuits defined in ISDN_CIRC_x_NAME=” (Page 151). The ISDN Circuit
has to be of type ’raw’.
OPENVPN_x_PING Default see: OPENVPN_DEFAULT_PING
See OPENVPN_DEFAULT_PING (Page 171). In contradiction to the default setting this setting
only affects the OpenVPN connection mentioned.
OPENVPN_x_PROTOCOL Default: OPENVPN_x_PROTOCOL=’udp’
Specifies the protocol to be used for establishing an OpenVPN tunnel. Possible values are
’udp’, ’udp6’, ’tcp-server’, ’tcp-server6’, ’tcp-client’ or ’tcp-client6’. Settings
’tcp-server’ or ’tcp-client’ make only sense if a VPN tunnel has to be established
through a number of paket filters or other tunnels. If no special case should be handled
always use the default setting ’udp’. By adding ’6’ the tunnel will be IPv6 capable
(WAN) and can be reached over IPv6-Internet.
OPENVPN_x_RESOLV_RETRY Default see: OPENVPN_DEFAULT_RESOLV_RETRY
See OPENVPN_DEFAULT_RESOLV_RETRY (Page 171). In contradiction to the default setting
this setting only affects the OpenVPN connection mentioned.
OPENVPN_x_PING_RESTART Default see: OPENVPN_DEFAULT_PING_RESTART
See OPENVPN_DEFAULT_PING_RESTART (Page 171). In contradiction to the default setting
this setting only affects the OpenVPN connection mentioned.
OPENVPN_x_START Default see: OPENVPN_DEFAULT_START
See OPENVPN_DEFAULT_START (Page 171). In contradiction to the default setting this setting
only affects the OpenVPN connection mentioned.
174