Technical data

4. Packages
4.11.2. Configuration of the HWSUPP package
The configuration is made, as for all fli4l packages, by adjusting the file
path/fli4l-3.10.1/ config /hwsupp.txt to meet your own demands.
OPT_HWSUPP The setting ’no’ deactivates the OPT_HWSUPP package completely. There
will be no changes made to the fli4l boot medium or the archive opt.img. OPT_HWSUPP
does not overwrite any other parts of the fli4l installation. To activate OPT_HWSUPP
set the variable OPT_HWSUPP to ’yes’.
HWSUPP_TYPE This configuration variable sets the type of supported hardware. Following
values can be used:
• sim
• generic-pc
• generic-acpi
• aewin-scb6971
• commell-le575
• fsc-futro-s200
• gigabyte-ga-m52l-s3
• lex-cv860a
• pcengines-alix
• pcengines-apu
• pcengines-wrap
• soekris-net4801
• soekris-net5501
• supermicro-pdsme
• supermicro-x7sla
• tyan-s5112
• winnet-pc640
• winnet-pc680
HWSUPP_WATCHDOG The setting ’yes’ activates the watchdog daemon if the hardware
contains a watchdog. The watchdog will automatically restart a non responding system.
HWSUPP_CPUFREQ The setting ’yes’ activates CPU frequency adjustment controls.
HWSUPP_CPUFREQ_GOVERNOR Selection of CPU frequency governor. The selected
governor controls the frequency adjustment behaviour. It’s a selection of one of:
• performance
The CPU allways runs with the highest available frequency.
• ondemand
The CPU frequency will be adjusted depending on the current CPU usage. The
frequency can change very quickly.
128