Technical data

4. Packages
it is not possible to provide them with the DSL package. It is essential to download these
drivers before from http://www.fli4l.de/download/stabile-version/avm-treiber/ and to ex-
tract them into the fli4l directory.
Circuit-support for Fritz!Card DSL was realised with friendly help from Stefan Uterhardt
(email: [e-mail]).
OPT_FRITZDSL activates support for Fritz!DSL. Default setting: OPT_FRITZDSL='no'.
FRITZDSL_TYPE Several Fritz!-cards exist for a DSL connection. The card used will be
specified by FRITZDSL_TYPE, have a look at table 4.4 for enumerating the supported cards.
Card Type Usage
fcdsl Fritz!Card DSL
fcdsl2 Fritz!Card DSLv2
fcdslsl Fritz!Card DSL SL
fcdslusb Fritz!Card DSL USB
fcdslslusb Fritz!Card DSL SL USB
fcdslusb2 Fritz!Card DSL USBv2
Table 4.4.: Fritz-Cards
Default setting:
FRITZDSL_TYPE='fcdsl'
FRITZDSL_PROVIDER With this option the type of the remote station is set. Possible
options are:
U-R2, ECI, Siemens, Netcologne, oldArcor, Switzerland, Belgium, Austria1, Austria2,
Austria3, Austria4
In Germany almost always UR-2 i used. Siemens and ECI are only used with very old
ports.
For Switzerland and Belgium, the options are self-explanatory and in Austria you have
to try what works for you.
If anyone has a better description for the options in Austria please tell.
Default setting:
FRITZDSL_PROVIDER='U-R2'
4.6.4. OPT_PPTP - DSL over PPTP in Austria/the Netherlands
In Austria (and other european countries) PPTP-protocol is used instead of PPPoE. A separate
ethernet card is connected to a PPTP-Modem in this case.
As of version 2.0 connecting via PPTP is realised as a Circuit - with the friendly help of
Rudolf Hämmerle (email: [e-mail]).
PPTP uses two cards. The first card should be used for connecting the LAN and the second
for connecting to the DSL-modem.
Only the first card can have an IP-address.
This means:
110