Technical data

1. Documentation of the base package
– Execution of user-defined commands on incoming phone calls (e.g. to perform In-
ternet dial-up)
– Support for IP aliasing (multiple IP addresses per network interface)
– VPN support
– IPv6 support
– WLAN support: fli4l can be an access point as well as a client
– RRD tool for monitoring the fli4l
– and much more. . .
• Hardware requirements
– Intel Pentium processor with MMX support
– 64 MiB RAM, better 128 MiB
– Ethernet network adapter
– ISDN: supported ISDN adapter
– an USB stick, an ATA hard disk or a CF card (which is accessed the same way as
an ATA hard disk); alternatively, booting from a CD is also possible
• Software requirements
The following tools are required on Linux systems:
– GCC and GNU make
– syslinux
– mtools (mcopy)
No additional tools are required on MS Windows systems, all necessary tools are provided
by fli4l.
Last but not least, the client utility imonc exists for controlling the router and for displaying
the router’s state. This tool is available for MS Windows (windows/imonc.exe) and also for
Linux (unix/gtk-imonc).
And now . . .
Have fun with fli4l!
Frank Meyer and the fli4l team
email: [e-mail]
11