Specifications

ADDING AN

iDCS 14 BUTTON KEY STRIP

• Place the keyset face down on a flat surface.

• Remove the base pedestal by placing your thumbs over the attachment clips

and press outward while simultaneously pressing down on the keyset body

with your fingertips.

• Remove the ribbon cable knockout from the bottom of the keyset.

• Clip the 14 button strip to the side of the keyset.

• Plug one end of the ribbon cable into the keyset and the other end into the

14 button strip.

• Place the support bracket over the ribbon cable and secure with the six

screws provided.

• Reattach the base pedestal.

REMOVE KNOCKOUTS

CONNECT RIBBON CABLE

idcs_keyset.qxp 12/9/2009 9:08 AM Page 18