User’s Manual Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera.
Instructions Getting to know your camera ■ Use this camera in the following order Set up the camera driver Take a picture Insert the USB cable Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.80) Take a picture. (p.16) Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.82) Check the camera’s power Check the camera’s power.
DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. ■ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre. ■ Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion.
CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. ■ Leaking, overheating, or burst battery could result in fire or injury. •Use battery with the correct specification for the camera. •Do not short circuit, heat or dispose of battery in a fire. •Do not insert the battery with the polarities reversed. ■ Remove the battery when not planning to use the camera for a long period of time.
Contents ●Metering ……………………………37 ●Continuous shot……………………37 ●Sharpness …………………………38 ●Auto Focus type……………………38 ●OSD(On Screen Display) information …………………………39 PLAY ●Starting play mode ………………40 ■Playing back a still image ………40 ■Playing back a movie clip ………40 ■Movie clip capture function ………40 ■On camera movie trimming………41 ■Playing back a recorded voice …41 ●LCD monitor indicator ……………42 ●Using the camera buttons to adjust the camera …………………………42 ■Play mode button …………………42 ●Thumbnail / Enlargement butto
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. < Included items > Camera case User manual, Product warranty PictBridge compatible printer(see p.54) Computer Camera strap Software CD (see p.79) AV cable DPOF compatible printer (see p.51) SD memory card/MMC (see p.
Identification of features Front & Top Microphone Speaker Mode dial Shutter button Power button Camera strap Self-timer lamp / Auto Focus lamp Speaker Optical 3X zoom lens/ Lens cover Flash 《6》
Identification of features Back & Bottom Mode dial Camera status lamp Zoom/ Thumbnail/ Volume button Earphones Jack E (Effect) button LCD monitor +/- button, DELETE button 5 function button Play mode button / Print button USB/ AV connection terminal Cradle connector 《7》
Identification of features Bottom/ 5-function button Cradle(Optional) ■ You can recharge your rechargeable battery, transfer a captured image to print, and download images with the cradle.
Identification of features ■ Self-timer lamp Icon ■ Mode icon : Refer to page 16 for more information about the camera mode setting. Status Blinking Description For 2 seconds the lamp blinks quickly at 0.25-second intervals. For the first 8 seconds, the lamp blinks at 1 second intervals. Blinking For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. A picture will be taken after about 10 seconds and 2 Blinking seconds later a second picture will be taken.
Connecting to a Power Source ■ Number of images and battery life : Using the SLB-0837 Battery life / Number of images Based on the following shooting conditions Using the fully charged battery, Auto mode, 7M image size, Fine image quality, Shot to Approx. 100 MIN / shot interval : 30Sec. Still image Changing the zoom position between the Wide About 200 shots and the Tele after every shot. Using the flash on every second shot.Using the camera for 5 minutes and then Powering it off for 1 minute.
Connecting to a Power Source ■You can charge the rechargeable battery (SLB-0837) by using the cradle. ■How to charge the rechargeable battery (SLB-0837) ● Charging with the cradle CAUTION ● Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera. ● If the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly.
Connecting to a Power Source ■ Insert the battery as shown - If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ / -). - When the battery chamber cover is opened, do not press the battery chamber cover by force. This may cause damage to the battery chamber cover. ■ There are 4 indicators for battery condition that are displayed on the LCD monitor.
Instructions on how to use the memory card ● Samsung cannot be held responsible for lost data. ● It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks, CD etc. ● If there is insufficient memory available : A [Memory Full!] message will appear and the camera will not operate. To optimise the amount of memory in the camera, replace the memory card or delete unnecessary images stored on the memory card.
When Using the Camera for the First Time ■ When the camera is turned on for the first time, a menu will be displayed to set date, time and language in the LCD monitor. This menu will not be displayed again after setting up the date, time and language. Set up the date, time and language before using this camera. ● Setting up the date, time and date type SETUP 1. Select the [Date&Time] menu by pressing the Date&Time ▲ Language 06/07/01 UP/DOWN button and press the RIGHT button. ▼ 13:00 2.
LCD monitor indicator ■ The LCD monitor displays information about the shooting functions and selections. ⑳ ① ⑲ ② ⑱ ③ ⑰ ④ ⑯ ⑤ ⑮ ⑥ ⑭ ⑦ ⑬ ⑧ ⑫ ⑨ ⑩ Description 1 Recording mode Description Icons Page 8 Card inserted indicator 9 Auto focus frame - 10 Camera shake warning p.20 11 Date/ Time 12 Exposure compensation 13 White Balance p.29 14 ISO p.28 15 RGB - 2006/07/01 01:00 PM p.59 p.30 RGB p.28 16 Sharpness p.38 17 Image quality / Frame rate p.
Starting the recording mode ■ How to use the AUTO mode ( ) Please select this mode for quick and easy picture taking with minimal user interaction. 1. Insert the batteries (p.12) taking note of the polarity (+ / -). 2. Insert the memory card (p.12). As this camera has a 15MB internal memory, it is not essential to nsert the memory card. If the memory card is not inserted, an image will be stored in the internal memory. If the memory card is inserted, an image will be stored on the memory card. 3.
Starting the recording mode ■ How to use the ASR (Advanced Shake Reduction) mode ( ) The ASR mode can help you get clearer pictures by minimizing camera shake. ■ Wise Shot 2 images are taken at a time. One is taken in the Fill-In Flash mode and the other is taken in the ASR mode. You can select and save only one of the images. ● Things to watch out for using the ASR mode 1. The digital zoom will not operate in the ASR mode. 2.
Starting the recording mode ■ How to use the SCENE mode ( ) Use the menu to easily configure optimal settings for a variety of shooting situations. 1. Select the SCENE mode by rotating the mode dial. 2. Press the menu button and select a desired scene menu. [SCENE mode] ※ The scene modes are listed below. [Nightscene] ( ) : Use this for shooting still images at night or in other dark conditions. [Portrait] ( ) : To take a picture of a person.
Starting the recording mode ■ Recording the movie clip without voice You can record the movie clip without voice. 1. Press the Up button and the ( ) icon will display on the LCD monitor. 2. Press the shutter button and movie clip is recorded without voice for as long as the available recording time allows. 3. To stop the recording, press the shutter button again.
Things to watch out for when taking pictures ■ Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. Using the camera buttons to set the camera ■ The recording mode function can be set up by using the camera buttons.
ZOOM W/ T button ● This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 15X. ● WIDE Zoom Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear farther away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its farthest from the camera. ● TELE Zoom Optical zoom TELE : Pressing the ZOOM T button.
ZOOM W/ T button INFORMATION ● Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. ● You may notice a decrease in image quality when using the digital zoom. ● To view a clearer digital zoom image, press the shutter button halfway at the maximum optical zoom position and press the zoom T button again.
Macro ( )/ Down button ■ While the menu is showing, the DOWN button operates as a direction button. When the menu is not showing, you can use the MACRO/ DOWN button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator displays on the LCD monitor. INFORMATION [Auto focus - No icon] ●When the macro mode is selected, be particularly careful to avoid camera shake.
Focus lock Flash ( ■ To focus on a subject not positioned in the centre of the picture, use the focus lock function. ● Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject. Be careful not to press the SHUTTER button all the way down to avoid taking an unwanted picture. 3.
Flash ( )/ Left button INFORMATION ● If you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move the camera until the second flash fires. ● Using the flash frequently will reduce the life of the battery. ● Under normal operating conditions the re-charging time for the flash is usually within 4 seconds. If the battery is weak, the charging time will be longer.
Flash ( )/ Left button Self-timer ( ● Available flash mode, by recording mode (O:Selectable, X:Not Selectable) X X O X X X X X X X X X X O X O O X O O X X X X X X X X X X O X X X X X X X X O X X X X X O O X X X X X X X X X O O O O O O O O O O O X O X X O O O O O X X X X X X X X )/ Right button ■ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab.
MENU/ OK button +/- button ■ MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICE RECORDING mode is selected.
+/- button ■ RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to be captured. ● Setting RGB Values 1. Press the +/ - button, and then use the UP and DOWN buttons to select the RGB icon ( ). The RGB menu bar will appear as shown. 2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select the desired RGB value. - Up/ Down Button : Navigates between R, G, and B icons. - Left/ Right Button : Changes value of each icon. 3.
+/- button ■ White balance : The white balance control allows you to adjust the colours to appear more natural. ● Selecting a White Balance 1. Press the +/ - button, and then use the UP and DOWN buttons to select the white balance icon ( ). The white balance menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to set the white balance to the desired value. The value you set wil be displayed on the LCD monitor.
+/- button ■ Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the + / - button. ■ Long Time shutter : This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in NIGHT SCENE mode, you can set the shutter speed and aperture values to your preference. ● Compensating Exposure 1.
E (Effect) button ■ It is possible to add special effects to your images by using this button. ■ Available Effects, by recording mode (O : Selectable X : Not selectable) ■ When you select 3072X1728 (Wide 5M) image size, you can only select the color menu of the special effects.
E (Effect) button Capture:SH [The frame is activated] 2. Press the Up/ Down/ Left/ Right button to move the focus frame position. Capture:SH HighLight [Range 1] HighLight [Range 2] HighLight [Range 3] Move:◀▶ [After changing the frame position] HighLight [Range 4] 3. To select the focus frame position, press the +/- button again and you can take a picture. 3. The preset focus frame will appear.
E (Effect) button ● Changing a part of composite Before taking the last composite shot, you can change a part of composite shot. Composite shooting ■ You can combine 2 ~ 4 different shots in a still image. 1. Press the E button in the available camera modes with the exception of Movie clip and Auto mode and select the menu. Composite Capture:SH Del:+/- Capture:SH [Before taking the 3rd shot] 2. Select a desired sub menu by pressing the Up/ Down button and press the OK button.
E (Effect) button Photo Frame Movie Clip frame stabiliser ■ You can add 9 types of frame-like borders to a still image you want to capture. 1. Press the E button in the available camera modes with the exception of Movie clip and Auto mode and select the menu. 2. Select a desired sub menu by pressing the Up/ Down button and press the OK button. Photo Frame ■ This function helps stabilise images captured during movie recording. You can select this menu only in the MOVIE CLIP mode.
Using the LCD monitor to adjust the camera settings ■ You can use the menu on the LCD monitor to set up recording functions. ■ The items indicated by are default settings.
Quality/ Frame rate Size ■ You can select the image size appropriate for your application. Mode STILL IMAGE mode MOVIE CLIP mode ■ You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Metering ■ If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. - Multi : Exposure will be calculated based on an METERING average of the available light in the image Multi Spot area. However, the calculation will be biased towards the centre of the image area. This is suitable for general use. - Spot : Only the rectangular area in the centre of the LCD monitor will be metered for light.
Sharpness ■ You can adjust the sharpness of the picture you are about to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. Auto Focus type ■ You can select your preferred Auto Focus type according to the shooting condition.
OSD(On Screen Display) information ■ In any mode with the exception of VOICE OSD INFORMATION RECORDING mode, you can check the recording Full Basic status in the LCD monitor. LCD Save ■ Idle mode : If you select the [LCD Save] and the camera isn't operated during the specified time(about 30 SEC.), the camera power will become idle automatically (LCD monitor : OFF, Camera status lamp : Blinking). - To use the camera again, press any of the camera buttons except the power button.
Starting play mode ■ Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. ■ If the memory card is inserted in the camera, all the camera functions apply only to the memory card. ■ If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. ● Playing back a still image 1. Select the PLAY mode by pressing the play mode button ( ). 2.
Starting play mode ■ On camera movie trimming : You can extract desired frames of movie clip during the movie clip play back. ● If the running time is under 10 seconds, the movie clip can’t be trimmed. 1. Press the Pause button at the point of the movie clip that you want to start extracting. 2. Press the T button. 3. Press the Play & Pause button and the extracted Trim:T Capture:E range will be displayed on the status bar. 4.
LCD monitor Indicator Using the camera buttons to adjust the camera ■ The LCD monitor displays shooting information about the displayed image. ⑫ ① ② Play mode button ISO:80 Av:F3.5 Tv:1/30 Flash:On 3072X2304 2006/07/01 ③ ④ ⑤ No. 1 2 3 4 5 6 7 8 9 10 11 12 《42》 ■ In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions.
Thumbnail( )/ Enlargement( ) button/ Volume button( ) ■ You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. ■ When a movie clip, voice memo or voice recording file is playing back, you can control the volume of those files using this button. ● Thumbnail display 1. While an image is displayed full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3.
Thumbnail( )/ Enlargement( ) button/ Volume button( ) ● Trimming : You can extract part of the image and save it separately. 1. Select an image that you want to enlarge and press the enlargement button. Trimming? 2. Different parts of the image can be viewed by Yes No pressing the 5 function button. Confirm : OK 3. Press the MENU button and a message will be displayed as shown alongside. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
Play & Pause ( )/ Down button ■ In Play mode, the play & pause/ down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor. - If a still image with a voice memo, a voice file, or a movie clip is playing In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip. During playback : Temporarily stops playback.
E (Effect) button Delete ( Colour ■ By using the camera’s digital processor, it is possible to add special effects to your images. 1. Select a still image or movie clip and press the button. 2. Select a desired sub menu and press the OK button. : Captured images will be stored in black and white. : Captured images will be stored in a sepia tone. : Captured images will be stored in a red tone. : Captured images will be stored in a green tone. : Captured images will be stored in a blue tone.
Setting up the play back function using the LCD monitor ■PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button.
Setting up the play back function using the LCD monitor Menu tab Main menu Type Quality Date File Name RESET Sub menu Auto Plain Photo FastPhoto Auto Draft Normal Fine Auto Off On Auto Off On No Yes Secondary menu - ※ Menus are subject to change without prior notice. Page p.56 p.56 Starting the slide show ■ Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1.
● Configure slide show effects : Unique screen effects can be used for the slide show. 1. Select the [Effect] sub menu by pressing the SLIDE UP/ DOWN button and press the RIGHT button. Show Off Interval 2. Use the Up/ Down Button to select the type of Effect effect. : Normal display. Back:◀ Set:OK : Image is displayed slowly. : Image is displayed slowly from the centre outwards. : Image moves from the top left. : The image slides diagonally from top left to bottom right. : The image slides irregularly. 3.
Resize Deleting images 《50》 2048X1536 1024X768 640X480 Start Image Exit:MENU Move: ● Image Resize Types (O : Sectable X : Not Selectable) DELETE Select All Pics Exit:MENU Move: Select:T Del:OK ◀▶ ● Deleting images 1. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. [Select] : Selection window for an image to delete is displayed. - Up/ Down/ Left/ Right : Select an image - Zoom T Button : Select the image for deletion.
Rotating an image DPOF ■ You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Select a desired sub menu by pressing the UP/ DOWN button. ■ The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs.
DPOF : STANDARD DPOF : Index ■ This function allows you to embed print quantity information on a stored image. 1. Select the [Standard] menu by pressing the UP/ DOWN button and press the RIGHT button. 2. Select a desired sub menu by pressing the UP/ DOWN button. [Select] : Selection window for an image to print is displayed. - Up/ Down/ Left/ Right : Select an image to print. - Zoom W/T Button : Select the number of prints.
DPOF : Print size On Screen Display information ■ You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. ※ DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10 ※ Depending on the manufacturer and printer model, cancelling the printing may take a little longer for the printer to process. 1. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
Copy To Card PictBridge ■ This enables you to copy image files, movie clips and voice recording files on the camera's built-in internal memory to the camera's removable SD memory card. COPY TO CARD No Yes Exit:MENU Move: ◀▶ ● Copying to the Memory Card 1. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. - [No] : Cancels "Copy to Card".
PictBridge PictBridge : Picture Selection ※ If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible printer to the camera through USB cable with [Connecting Computer] message. By pressing the Printer button, at this point, you can connect the easy printing mode with [Connecting Printer] message. In some instances the camera may not connect to the printer, this will depend on the make of the printer.
PictBridge : Print Setting PictBridge : Reset ◀▶ ■ You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Press the Menu button and the PictBridge menu Pictbridge will display. Auto Size 2. Use the UP and DOWN buttons to select the Auto Layout Auto Type desired menu, and then press the RIGHT button. Auto Quality Auto Date 3.
Setup menu ■ In this mode, you can set up basic settings. In any camera modes, except Voice Recording and MP3, PMP, TEXT VIEWER modes, press the MENU button. Press the LEFT/RIGHT button and select the [SETUP] menu tab. The items indicated by are default settings. Menu tab Main menu File Power Off Sub menu Series Reset 1, 3, 5, 10min ENGLISH DEUTSCH Secondary menu - ESPAÑOL Menu tab Main menu Off Sound Page p.58 USB p.
Setup menu [ File name ] [ Auto power off ] ■This function allows the user to select the file naming format. [Series] : New files are named using numbers that follow the previous sequence, even when a File Power Off new memory card is used, or after Language formatting, or after deleting all pictures. Format Date&Time [Reset] : After using the reset function, the next file Back:◀ name will be set from 0001 even after formatting, deleting all or inserting a new memory card.
Setup menu [ Format ] [ Setting up the Date/ Time/ Date type ] ■ This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images MP3, TEXT and PMP files will be deleted.Be sure to download important images to your PC before formatting the memory. ■ You can change the date and time that will be displayed on the captured images and set up the date type. If [No] is selected : The memory card will not be formatted.
Setup menu [ Sound ] ■ If you set the operation sound to on, various sounds will be activated for camera startup when buttons pressed, so that you can be aware of the camera operation status. ● [Sound] sub menu : Off/ Low/ Medium/ High [ AF Sound ] ■ If you set the operation sound to ON, various sounds will be activated for camera startup so that you can be aware of the camera operation status.
Setup menu [ LCD brightness ] ■ Connecting to an external monitor ■ You can adjust the LCD brightness. SETUP Sound USB AF Sound AF Lamp LCD [Using the AV cable with Cradle] Dark Normal Bright Back:◀ Set:OK [ Selecting Video out type ] ■ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.
Setup menu [ Initialisation ] INFORMATION ● NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. ● PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway. ● When using a TV as an external monitor, you will need to select the external or AV channel of the TV. ● There will be a digital noise on the external monitor, but it is not a malfunction.
Start up image MYCAM Start Image Start Sound Shutter Sound ◀ Off ◀ ■ You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. ●Use a saved image for the start-up image with the [Start Image] in the [RESIZE] menu in the play mode. ●The start-up image will not be deleted by deleting all images or [Format]menu. ●The User images will be deleted by [Reset]menu.
Downloading files INFORMATION ● Take care of the illegal duplication of MP3 & multimedia files. It violates various copyright laws. ● This camera can only play back MP3 files in the MP3 mode and SDC files (modified XviD MPEG4 video / MPEG Layer2 audio type) in the PMP mode. ● If a file can not be played back on this camera, convert it into the supported file format by using the Digimax Converter. (p.86) ● Up to 200 files can be saved in a folder.
Starting the MP3/ PMP/ TEXT VIEWER mode INFORMATION [MP3 mode] 003/003 Move: ◀▶ ◀▶ J-Heart - Misty.mp3 waiting for you by J He misty by J Heart.MP3 Select:OK MP3 misty by J He [PMP mode] 0:00:03/ 0:26:28 003/003 Move: ◀▶ ◀▶ Animation Comic [SDC]-Movie sample.sdc Select:OK [SDC]-Movie sample.s Who bent my camera? [TEXT VIEWER mode] 001/001 Move: ◀▶ ◀▶ TEXT.TXT Thank you for buying a Samsung Camera.
LCD monitor indicator for MP3/PMP/TEXT VIEWER mode ■ The LCD monitor displays information about the MP3, multimedia and Text file. Indication of present TEXT MP3 mode Battery (p.12) Current page / Whole page Encoding Type (ANSI, Uni) TEXT VIEWER mode Volume Indication Battery (p.12) Equalizer TEXT Contents Playing time Time line Type of play back (p.70) Bit rate (p.65) MP3 misty by J He Volume (p.67) Play & Pause/ Control button (p.
Using the camera buttons to adjust the camera Volume button ■ You can control the volume with this button. There are 0~30 steps Play & Pause/ Control button ■ When a file is playing back, press the Down button to pause the file. Pressing it again will resume playback. ■ MP3 mode You can search the MP3 files by pressing the Left/ Right button. You can’t search the MP3 file during play back. ■ PMP mode You can search the Multimedia files by pressing the Left/ Right button.
Using the camera buttons to adjust the camera Hold / Equalizer button Playlist button ● If you press the Hold button for over 1 second, the camera buttons are locked. - If the camera buttons are locked, the buttons can't be operated while playing back. But Power off, Video out, USB connection and LCD on functions can be operated. ● While a multimedia file is playing back, you can select a desired file by using the browsing menu. 1. While a multimedia file is playing back, press the Playlist button ( ).
Setting up the playback function using the LCD monitor Menu tab ■ MP3/ PMP mode functions can be changed by using the LCD monitor. Press the MENU button and the menu will display on the LCD monitor. Menu tab Main menu Resume Sub menu Page p.70 TEXT Main menu MP3 MP3 Skin p.70 Delete All p.71 Show Interval - Page p.70 Auto Scroll p.72 p.72 MP3 BGM Language p.
Setting up the playback function using the LCD monitor Play mode Resume ■ You can set the playback type. 1. Press the Menu button in each mode. 2. Select a desired playing type in the [Resume] menu by pressing the Up / Down button and pressing the OK button. Resume Resume Resume [MP3 mode] [PMP mode] [TEXT VIEWER mode] : When the camera is turned on/ off or camera mode is changed, this camera will memorize the latest stopped frame. MP3 mode : plays back from the beginning of the file.
Setting up the playback function using the LCD monitor Delete all Playing back the slide show ■ All files stored on the memory card will be deleted. In the MP3 mode, only MP3 files are deleted. In the PMP mode, only multimedia files are deleted. In the TEXT VIEWER mode, TEXT files are deleted. ■While the MP3 file is playing back, captured images are displaying on the LCD monitor continuously. : Display the images once. : Display the images continuously.
Setting up the playback function using the LCD monitor Display setting ■ You can set the play back function display on the LCD. [ ] : If there is no operation during 5 seconds, Menu bar will disappear. [ ] : Menu bar will not display on the LCD monitor. [ ] : Menu bar will display on the LCD monitor. Auto Scroll Player Display ※ To see the caption, insert the caption file (.smi) by using the Digimax Converter. (p.
Important notes Be sure to observe the following precautions! ■ This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes ■ Do not attempt to disassemble or modify the camera. ■ Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to the camera and is not a malfunction. ■ When images are uploaded or downloaded (when the charger and USB cable are inserted into the cradle at the same time), the data transfer may be affected by static electricity. In this case, disconnect and re-connect the USB cable before trying the transfer again.
Before contacting a service centre ■ Please check the following The camera doesn’t switch on ㆍThere is low battery capacity → Insert charged battery (p.12) ㆍBattery is inserted incorrectly with the polarities reversed.
Before contacting a service centre Images are too bright ㆍExposure is excessive → Reset exposure compensation No image on external monitor ㆍThe external monitor has not been connected properly with the camera → Check the connection cables ㆍThere are incorrect files in the memory card → Insert a memory card that has correct files When using the PC’s explorer, the [Removable Disk] file does not show ㆍCable connection is incorrect → Check the connection ㆍThe camera is off → Turn the camera on ㆍThe operating sy
Specification ■ Sharpness : Soft, Normal, Vivid ■ Effect : Normal, B&W, Sepia, Negative, Red, Green, Blue, RGB, Composite , Highlight, Frame ■ White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom ■ Voice Recording : Voice Recording (max 1 hour), Voice Memo in Still Image (max. 10 sec.
Specification ■ Power Source : Rechargeable battery : SLB-0837 (860mAh) Adaptor : SAC-45, SUC-C2 Cradle : SCC-NV3 (Optional) ※ Included battery type may vary depending on sales region. ■ Dimensions (WxHxD) : 94.5 x 57 x 17.5 mm ■ Weight : 142g (without battery and card) ■ Operating Temperature : 0 ~ 40°C ■ Operating Humidity : 5 ~ 85% ■ Software - Camera Driver : Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.0 ~ 10.
About the software Software Notes Please ensure that you read the software instructions carefully before use. ·The attached software is a camera driver and image editing software tool for Windows. ·Under no circumstances should all or part of either the software or the user manual be reproduced. ·Copyrights for software are licensed only for use with a camera. ·In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
About the software ■ Digimax Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie clips clip with this software. This software is only compatible with Windows. INFORMATION ● Be sure to check the system requirements before installing the driver. ● You should allow 5 ~ 10 seconds for running the automatic setup program. If the frame does not show, run the [Windows Explorer] and select [Samsung.
Setting up the application software 3. To play back the movie clip recorded with this camera on the computer, install the XviD codec. 4. Install the software by instructions on the monitor.
Setting up the application software 5. After restarting the computer, connect the PC to the camera with the USB cable. 6. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognize the camera. Starting PC mode •If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". •In this mode, you can download stored images to your PC through the USB cable.
Starting PC mode ■ Connecting the camera to a PC [Using the USB cable with Cradle (optional) ] Removable Disk ■ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable.
Removable Disk 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. Removing the removable disk ■ Windows 98/ 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. ■ Windows 2000/ ME/ XP (The illustrations may differ from those shown depending on the Windows O/S.) 1.
Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk may be removed safely. Removing the USB Driver for Windows 98SE ■ To uninstall the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager. 7. Unplug the USB cable. Setting up the USB Driver for MAC 1.
Digimax Converter ■ Multimedia (Movie, Video clip, etc) files can be converted into movie clips that can be played back on this camera. This software is only compatible with Windows. (Windows 2000/XP recommended) ■ How to use the Digimax Converter 1. Double click the Digimax Converter icon ( ) on the desktop. 2. Click the Add icon ( ) and select a file that you want to add. 3. If you want to add a caption, check "Use subtitles from file(*.smi)". 4. Select settings that you want and click the Convert button.
Digimax Converter INFORMATION ● If there is no font that is compatible with the script file on your PC, the script is shown as ' '. ● Transferring the converted file to a removable disk is time consuming. It may take a long time. The duration depends on the file size. ● Do not use the PMP mode while driving. It may create a traffic hazard. ● A file that does not support fast search on the Windows Media Player can't select converting range and divide file size.
Digimax Master 4. Select a destination and make a new folder in which to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, images will be downloaded. 5. Click [Next >] button. ● Image viewer : You can view the stored images. ① ⑤ ⑥ ⑦ ② ③ ④ 6. A window will open as shown alongside.
Digimax Master ●Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ● Image edit : You can edit the still image. ① ① ④ ② ② ③ - Image edit functions are listed below. ① Edit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Adjust] : You can modify image quality. See the [Help] menu. [Retouch] : You can change the image or add effects to the image. See the [Help] menu.
FAQ ■ Please check the following if the USB connection malfunctions. Case 1 The USB cable is not connected or you are using a cable with an incorrect specification. → Use a USB cable with the correct specification. Case 2 The camera is not recognized by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. → Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera.
FAQ ■ When the movie clip doesn’t play back on the PC ※ When the movie clip recorded by the camera doesn’t play back on the PC, the causes are mostly due to the codec installed on the PC. ● When codec for play back the movie clip isn’t installed → Install the codec as listed below. [ Installing codec for Windows ] 1) Insert the CD provided with the camera. 2) Run the windows explorer and select [CD-ROM drive:\XviD] folder and click the XviD-1.1.0-30122005.exe file.
Correct Disposal of This Product Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
SAMSUNG TECHWIN CO., LTD. SAMSUNG OPTO-ELECTRONICS GmbH OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8222, 8488, 8490 FAX : (82) 31-740-8398 www.samsungcamera.com ZENTRALE, KEINE REPARATUR AM KRONBERGER HANG 6 D-65824 SCHWALBACH/TS, GERMANY TEL : 49 (0) 6196 66 5303 FAX : 49 (0) 6196 66 5366 TECHNISCHE SERVICE HOTLINE : 00800 4526 3727 (nur kostenfrei fur Anrufe aus Deutschland) SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
