User Manual Thank you for buying a Samsung camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera.
Instructions Getting to know your camera ƈ Use this camera in the following order. Before connecting the camera to a PC, via Set up the camera driver the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CDROM. (p.73) Take a picture Take a picture. (p.18) Insert the USB cable Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.75) Check the camera’s power Check the camera’s power.
Danger Warning DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. ƈ Do not attempt to modify this camera in any way. To do so may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. ƈ Leaking, overheating, or damaged battery could result in fire or injury. ҮUse battery with the correct specification for the camera. ҮDo not short circuit, heat or dispose of battery in fire. ҮDo not insert the battery with the polarities reversed. ƈ Remove the battery when not planning to use the camera for a long period of time.
Contents ƃUsing the LCD monitor to set the PLAY camera ōōōōōōōōōōō26 ƈEffectōōōōōōōōōōōō54 ƈInitialisation ōōōōōōōōō65 ƈMotion GIF ōōōōōōōōō55 ƃImportant notesōōōōōōōō66 ƈColor toneōōōōōōōōōō27 ƃStarting play mode ōōōōōō44 ƈRed eye fix ōōōōōōōōō55 ƃWarning indicator ōōōōōōō67 ƈBrightnessōōōōōōōōōō28 ƈPlaying back a still image ōōō44 ƈPictBridge ōōōōōōōōōō56 ƃBefore contacting a service centreō68 ƈSelecting focus type ōōōōō28 ƈPlaying back a movie clip ōōō44 ƈFlash ōōōōōōōōōōōō30 ƈMovie cli
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. < Included items > Computer (see p.75) Camera case User manual, Product warranty Camera strap Software CD (see p.72) SD/SDHC memory card/ MMC (see p.14) DPOF compatible printer (see p.
Identification of features Front & Top Mode dial Shutter button Power button Self-timer lamp Built-in flash Remote control sensor Auto focus lamp Lens/ Lens cover Microphone ſ Instructions for the Built-in flash - The flash opens automatically when you press the shutter button down half way. - Do not open the flash by force. It may break the camera. - Close the flash when you are not using it to prevent breakage.
Identification of features Back & Bottom Zoom W button (Thumbnail) Zoom T button (Digital zoom) Camera status lamp LCD monitor Smart button Eyelet for camera strap Smart button BACK button / FR button Play mode button Tripod socket USB / AV connection terminal ŝ7Ş
Identification of features ƈ Self-timer lamp Bottom Icon Battery chamber cover Status Battery chamber Blinking Blinking Blinking Battery holder Blinking Description - For the first 7 seconds, the lamp blinks at 1 second intervals. - For the final 3 seconds, the lamp blinks quickly at 0.25second intervals. For 2 seconds, the lamp blinks quickly at 0.25-second intervals before taking a picture A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Identification of features ƈ Mode dial You can select the desired working mode by using the mode dial located on the top of the camera. ƃ ASR mode Advanced Shake Reduction (ASR) mode. This mode will reduce camera shake and help you get a clearer image. ƃ AUTO mode Select this mode for quick and easy picture taking with minimal user interaction. ƃ SPECIAL EFFECT mode It is possible to add special effects to your images by using this mode.
Identification of features Connecting to a Power Source ƃ MOVIE CLIP mode A movie clip can be recorded for as long as the available recording time of the memory capacity allows. ƃ PHOTO GALLERY mode The saved images can be reviewed with music or various effects in this mode. ƈ You should use the rechargeable battery (SLB-1137D) supplied with the camera. Be sure to charge the battery before using the camera.
Connecting to a Power Source a INFORMATION Important information about battery usage. ƃ When the camera is not used, turn off the camera power. ƃ Please remove the battery if the camera will not be used for long periods. Battery can lose power over time and are prone to leaking if kept inside the camera. ƃ Low temperatures (below 0°C) can affect the performance of the battery and you may experience reduced battery life. ƃ Battery will usually recover at normal temperatures.
Connecting to a Power Source a ƈ How to charge the rechargeable battery (SLB-1137D) ƃ Charging with the camera Charging LED ƈ Charging LED of the AC Adapter Being Charged Charging is complete Charging error Being discharged (Using the AC adapter) ŝ12Ş Charging LED Red LED is on Green LED is on Red LED is off or blinking Orange coloured LED is on CAUTION ƃ Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause damage to the cable or camera.
a Connecting to a Power Source ƈ Insert the battery as shown - If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ / -). - Do not use force to open the battery chamber. This may damage the battery chamber cover. ƈ There are 4 indicators for battery condition that are displayed on the LCD monitor.
a Instructions on using the memory card ƃ If the memory card is subjected to any of the following, the recorded data may become corrupted : - When the memory card is used incorrectly. - If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading. ƃ Samsung cannot be held responsible for lost data. ƃ It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks, CD etc.
When Using the Camera for the First Time : Smart button ƈ This button is used for shifting the menu cursor to select or for confirming the selected menu. ƈ To select a sub menu, in some menus, touch the button and slide your finger to the left / right. 3648X2056 3136X2352 3648X2432 SIZE [Selecting the main menu : Touching the button] 3648X2736 [Confirming the main menu : Pressing the button] Slow Fast [e.g.
When Using the Camera for the First Time : Setting up the Date / Time and Language ƈ When the camera is turned on for the first time, a menu will be displayed in the LCD monitor to set date, time and language. This menu will not be displayed again after setting up the date, time and language. Set up the date, time and language before using this camera. ƃ Setting up the date, time and date type 1. Press the [Date&Time] menu button. 2. Select a desired date type by pressing the vertical smart button.
LCD monitor indicator ƈ The LCD monitor displays information about the shooting functions and selections. ڻ ڼ ڽ ں No. Description 4 Card inserted indicator Icons Page p.13 5 Battery p.13 6 Optical / Digital Zoom bar / Digital Zoom rate p.24~25 7 Focus mode p.28~29 8 Flash p.30~31 ڹ ؊ ھ ؉ ؋ ، ؈ ۀ ہ ۂ ۃ ۄ ڿ ۅ ۆ ۇ ؆ ؇ [Image & Full Status] No. Description 1 Recording mode 2 Date / Time 3 Icons Page p.9~10 12:00 AM 2007.02.
Starting the recording mode ƈ How to use the AUTO mode ( ) Please select this mode for quick and easy picture taking with minimal user interaction. 1. Insert the battery (p.13) taking note of the correct polarity (+ / -). 2. Insert the memory card (p.13). As this camera has a 20MB internal memory, it is not essential to insert the memory card. If the memory card is not inserted, an image will be stored in the internal memory. If the memory card is inserted, an image will be stored on the memory card. 3.
Starting the recording mode ƃ How to use the APERTURE PRIORITY mode ( ) This mode will set the aperture value for automatic exposure depends on the brightness of the object by automatic shutter speed setting in the camera. 1. Select the ASM mode by rotating the mode dial. 2. Select the APERTURE PRIORITY mode ( ) by using the smart button. 3. Set the desired aperture value by using the smart button. (p.41) 4. Point the camera towards the subject and compose the image by using the LCD monitor. 5.
Starting the recording mode ƈ How to use the ASR (Advanced Shake Reduction) mode ( ) This mode will reduce the effect of camera shake and help you get a well-exposed image in dim conditions. ƈ How to use the SPECIAL EFFECT mode ( ) It is possible to add special effects to your images by using this mode. Select the Special Effect mode by rotating the mode dial. ſ Refer to page 38~40 for more information about the special effect menus. ƃ Things to watch out for using the ASR mode 1.
Starting the recording mode ƈ How to use the MOVIE CLIP mode ( ) A movie clip can be recorded for as long as the available recording time of the memory capacity allows. 1. Select the MOVIE CLIP mode by rotating the mode dial. (Available recording time will display 00:00:22 on the LCD monitor) 2. Point the camera towards the subject and compose the image by using the LCD monitor. Press the shutter button and movie clips are recorded for as long as the available recording time allows.
Things to Watch Out for When Taking Pictures ƈ Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [Lightly press the shutter button] [Press the shutter button] ƈ The available recording time may vary depending on shooting conditions and camera settings.
Using the camera buttons to set the camera ƈ The recording mode function can be set up by using the camera buttons. POWER button ƃ Used for turning the camera’s power on / off. ƃ If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 62 for more information about the auto power off function. Shutter button ƃ Used for taking an image or recording voice in the RECORDING mode.
ZOOM W / T button ƃ If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. ƃ WIDE Zoom Optical zoom WIDE ƃ This camera has a 5X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 25X.
ZOOM W / T button INFORMATION ƃ Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. ƃ If the Zoom buttons are being pressed during the Movie clip shots, the voice will not recorded. ƃ You may notice a decrease in image quality when using the digital zoom. ƃ To view a clearer digital zoom image, press the shutter button halfway at the maximum optical zoom position and press the zoom T button again.
Face recognition(FR) button INFORMATION ƃ This function can detect up to 8 persons. ƃ When the camera recognises many people at the same time, it will focus on the nearest person. ƃ When the camera detect a target face, the white colour focus frame will display over the target face and the gray colour focus frame will display over the rest faces(up to 7). Press the shutter button halfway down to focus the face and the white focus frame turns green.
Using the LCD monitor to set the camera MENU page ASM VOICE O O O O O O O p.35~36 W/B X O O X X X O p.37 ISO X O X X X p.36 X O O *1O X EV X X X O p.36 MULTI O O O O O - O SPOT X O O X O - O CENTER X O O X O - O METERING SHARPNESS X O O X O X X p.33 X X X X O X X p.38 M.GIF X X X X O X X p.39 COMPOSITE X X X X O X X p.
Brightness Selecting focus type ƈ You can change the brightness of the image. BRIGHT ƈ You can select the focus type in accordance with the subject distance. The distance ranges are show below. SUPRE MACRO MACRO NORMAL(AF) MANUAL ƃ Changing the brightness To select the brightness, touch the button and slide your finger to the left or right.
Selecting focus type ƃ Types of focus modes and focus ranges (W : Wide, T : Tele) Focus Type Wide(W) Tele(T) Normal 80cm-Infinity 1.5m~Infinity Macro 10cm~80cm 50cm~80cm Auto Macro 10cm-Infinity 50cm-Infinity Super Macro Manual Focus 1~10cm (Wide only) 1cm-Infinity 50-Infinity ƈ Manual Focus (MF) Where the automatic focusing is not available, for example, in very dark conditions, use the manual focus. Please be careful when using the manual focus as the picture can be blurred easily.
Flash ƈ You can select the flash type in accordance with the subject distance. The distance ranges are show below. ƈ When using the ASR, Continuous shot, High Speed Continuous shot, Motion Capture, AEB, Movie clip mode and Still image mode (except the NIGHT, PORTRAIT, CHILDREN, BACKLIGHT and BEACH & SNOW mode), the flash will not operate. INFORMATION FILL IN RED EYE AUTO OFF 7 ſ When Super macro is selected, the flash is automatically switched off. ſ When [CONTINUOUS], [HIGH SPEED], [M.
Flash Size ƃ Flash mode indicator Menu tab Flash mode Flash off ƈ You can select the image size appropriate for your application. Description The flash does not fire. Select this mode when capturing images in a place or situation where flash photography is prohibited. When you capture an image in a poorly lit condition, the camera shake warning indicator ( ) will display on the LCD monitor. Auto flash If the subject or background is dark, the camera flash will operate automatically.
Continuous shot ƈ You can select the type of shooting and the number of continuous shots. - SINGLE : Take one picture only AEB - CONTINUOUS : Images will be taken continuously M. CAPTURE HIGH SPEED until the shutter button is released. CONTINUOUS The shooting capacity depends on SINGLE the memory. - HIGH SPEED : This takes 3 shots continuously (2.5 shots per second) when the [Still image mode] shutter is pressed and held down. - M.
Sharpness Effect ƈ You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. ƈ By using the cameraŖs digital processor, it is possible to add special effects to your images VIVID NORMAL SOFT 7 [PROGRAM mode] ( ( ( ( Sub menu SOFT NORMAL VIVID Icon Description The edges of the image are softened.
Quality / Frame rate Self-timer / Remote control ƈ You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Still image mode Mode Movie clip mode Icon Sub menu Super Fine Fine Normal 30FPS 15FPS File Type jpeg jpeg jpeg avi avi ƈ This function is used when the photographer would also like to be in the picture.
Self-timer / Remote control ƃ Remote control range When you take a picture by using the remote control, refer to the illustrations shown alongside about the remote control range. [Shutter button on the remote control] ƃ Replacing battery for the remote control Make sure the + (positive) polarity is toward the top and the - (negative) polarity is toward the bottom while installing battery for the remote control. Replace battery for the remote control in the local service centre. Use the CR 2025 3V battery.
Voice recording / Voice memo ISO INFORMATION ƃ A distance of 40cm between you and the camera (microphone) is the best distance to record sound. Exposure compensation ƈ This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value in the compensating exposure menu. Exposure compensation menu is available in the Program, ASM (Excluding M mode) and Movie clip mode. ƃ Compensating Exposure 1.
White balance ƈ The white balance control allows you to adjust the colours to appear more natural. When a menu except the AWB (Auto White Balance) is selected, you can only select the negative color effect. White Balance menu is available in the Program, ASM and Movie clip mode. AUTO DAYLIGHT CLOUDY Fluorescent H Fluorescent L TUNGSTEN CUSTOM : The camera automatically selects the appropriate white balance settings, depending on the prevailing lighting conditions. : For taking images outside.
Scene menu ƈ Use the menu to easily configure optimal settings for a variety of shooting situations. ſ The scene modes are listed below. [NIGHT] ( ) : Use this for shooting still images at night or in other dark conditions. [PORTRAIT] ( ) : To take a picture of a person. [CHILDREN] ( ) : To take a picture of fast moving objects, for example, children. [LANDSCAPE] ( ) : To take pictures of distant scenery.
Special Effect : Motion GIF Special Effect : Composite shooting ƈ You can make Motion GIF with captured images. Motion GIF : Taking images continuously and save them in a file. This file supports animation. ƃ How to make the Motion GIF 1. Select the Special Effect mode by rotating the mode dial. 2. Press the Motion GIF menu button. 3. Select the image size and FPS (Frame Per Second). 4. Press the Shutter button to take pictures. (Max. 50 images) 5. Press the OK menu button to save the image.
Special Effect : Composite shooting ƃ Changing a part of composite shot before taking the last shot Before taking the last composite shot, you can change a part of composite shot. 1. During the composite shots, press the BACK button. 2. A previous image will be deleted and new frame will display. If there is an image taken before, press the BACK button again and a previous image will be deleted again.
Aperture Value Photo Gallery mode ƈ This mode will set the aperture value for automatic exposure. Smaller Aperture values make the object sharp but blur the background. Larger Aperture values make both the object and background sharp. ƈ When the images play back, you can add play back effect and listen to a B.G.M. Only still images can be played back. Movie, Voice files are not played back. ƈ Selecting a play back mode 1. Select the Photo Gallery mode by rotating the mode dial.
Photo Gallery mode ƈ Album mode : Images play back by album. If a memory card is not inserted, Personal / Family / Friend / Event albums can be selected. All of images saved in the internal memory play back. ƃ Selecting an album You can select an album by using the smart button. Before selecting an album, insert images into albums. : All images save in the memory play back. : Images saved in the Personal album play back. : Images saved in the Family album play back.
Photo Gallery mode ƃ Playing back an album Press the slide show menu button. 100-0001 : Starting the slide show : Selecting an effect of the slide show : Setting play interval : Selecting a B.G.M A B.G.M can be played back with images. OFF Only a saved music can be selected. You can’t add any music on the B.G.M list. : Selecting play back time [Play] : The slide show is closed after one cycle. [Repeat Play] : The slide show is repeated until cancelled.
Starting play mode ƈ Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. ƈ You can set up the PLAY mode function by using the camera buttons and LCD monitor. ƈ If the memory card is inserted in the camera, all the camera functions apply only to the memory card. ƈ If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory.
Starting play mode ƃ Playing back a recorded voice ƃ Movie clip capture function : capture still images from the movie clip. 1. Press the II menu button while playing back a movie file. 2. Press the Capture menu button. The captured image is saved under a new file name. 100-0001 00:00:15 Capture 1. Select the recorded voice that you want to play 100-0001 back by using the smart button. 2. Press the [Play] button; menus for voice will display. 3. Press the Ȟ button to play back a voice clip file.
Starting play mode LCD monitor indicator ƈ The LCD monitor displays shooting information about the displayed image. ƃ Playing back a recorded voice memo 1. Select the still image that includes the voice memo by using the smart button. 2. Press the [Edit] button and menus will display. 3. Press the ( ) icon to play back a voice memo. - To pause a voice file while playing it back, press the II button. - Pressing the Ȟ button again will cause the voice file to restart.
Using the camera buttons to adjust the camera ƈ In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail ( ) / Enlargement ( ) button ƃ You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image.
Thumbnail ( ) / Enlargement ( ) button ƃ Image enlargement ƈ Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. To start the slide show, press the Start menu button. Movie file, Voice file and GIF file won't be displayed. 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by using the smart button. 3.
Starting the slide show Protecting images ƃ Setting play interval : Set the slide show play interval to the number of seconds preferred. 10 sec 5 sec ƈ This is used to protect (Lock) specific shots from being accidentally erased. It also unprotects (Unlocks) images that have been previously protected. ONE : Protect / release displayed image. ALL : Protect / release all saved images 3 sec 1 sec ONE ALL OFF - If you protect an image, the protect icon will be displayed on the LCD monitor.
Deleting images DPOF ƈ This is used to delete the displayed image. YES : deletes displayed or checked ( ) image. NO : cancels deleting displayed image or checked ( ) image. - The protected images can’t be deleted. - If you wish to delete multi-image, check to delete the image by using the ( ) button and the smart button (horizontal) and then press the [Yes] menu. - The number of images will display right bottom of the LCD monitor.
DPOF : STANDARD DPOF : Print size ƈ This function allows you to embed print quantity information on a stored image. 1. Select the DPOF menu by pressing the smart button. 2. Select a desired sub menu by pressing the smart button. [ONE PIC] : Select a number of prints of displayed image. [ALL PICS] : Configure number of prints for all pictures except movie and voice files. [CANCEL] : Cancel the print setup. 3. Press the OK button to confirm the setting.
DPOF : Index Rotating an image ƈ Images (except for movie clips and voice file) are printed as index type. 1. Select the [INDEX] menu by pressing the smart button. 2. Select a desired sub menu by pressing the smart button. If [NO] is selected : Cancel the index print setting. If [YES] is selected : The image will be printed in index format. NO YES ƈ You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will be saved in its rotated state. 1.
Resize ƈ Change the resolution (size) of pictures taken. Select [User image] to save an image to be the start-up image. The resized image will have a new file name. 100-0151 100-0 151 INFORMATION RESIZE 1. Press the smart button (horizontal). 2. Press the [RESIZE] menu button. 3. Select a desired sub menu by pressing the smart button. START IMAGE 1M 1024X768 3M 2240X1680 5M 2688X2016 7M 3136X2352 ƃ You can change the resolution of only those files compressed in the JPEG 4:2:2 format.
Trimming Effect ƈ By using the camera’s digital processor, it is possible to add special effects to your images. 1. Press the [Edit] button. 2. Press the [EFFECT] menu button. 3. Select a desired sub menu by using the smart button. ƈ You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge. 2. Press the [Edit] button. 3. Press the [Trim] menu button. 4. Enlarge the image by using the Zoom button. To move the image, use the Smart button. 5.
Motion GIF ƈ You can make Motion GIF with captured images. Motion GIF : Taking images continuously and save them in a file. This file supports animation. ƃ How to play back the Motion GIF file 1. Select a Motion GIF file by using the smart button. 2. Press the [Play] button and menus display. 3. Press the start menu button. ƃ How to make the Motion GIF 1. Press the [Edit] button. 2. Press the Motion GIF menu button. 100-0001 ISO : 80 Av : F3.5 Tv : 1/50 FLASH : OFF 3648X2736 2007.02.01 M.
PictBridge ƈ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. ƃ Setting up the camera for connection to a printer 1. Connect the camera to a printer’s USB port with the supplied USB cable. 2. Select the [Printer] menu by using the smart button.
PictBridge ƈ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. ſ Some menu options are not supported on all printers. If not supported, the menus are not displayed in the LCD. ſ If the setting values are not changed in the automatic / manual setting, the setting values are automatically kept. 100-0001 ƈ Printing images (Custom mode) : Images will be printed with changed printer setting. 1.
PictBridge ƈ Reset : Initialises user-changed configurations. - In custom printing mode, press the Reset menu button. Setup menu ƈ In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Menu tab Main menu Sub menu Secondary menu OSD set (Recording mode) Full Basic Hide LCD Save OSD set (Playback mode) Full Basic Hide - Series Reset File ENGLISH DEUTSCH Language DANSK Page p.
Setup menu Menu tab Main menu Start Image Sound Volume Beep Sound Start Sound Shutter Sound Format Delete All Copy to Card Video Out Reset Sub menu Off User image Off Medium Off Sound2 Off Sound2 Off Sound2 No No No NTSC No Secondary menu LOGO Low High Sound1 Sound3 Sound1 Sound3 Sound1 Sound3 Yes Yes Yes PAL Yes Page p.62 ƈ How to select the setup menu 1. In any mode with the exception of Photo Gallery mode, press the extension menu button ( ) and press the setup menu button ( ). p.63 p.63 p.63 p.
Setup menu [OSD set] [ File name ] ƈ You can check shooting (Recording mode) and displayed image (Play back mode) information. ƈ This function allows the user to select the file naming format. Full Ȝ OSD Set OSD Set OSD Set Hide File LCD Save Language Language Date&Time Date&Time Exit:BACK [Recording mode menu] [Full] Full Basic Ȝ Basic Hide OSD Set File Exit:BACK [Play back mode menu] : When the smart button is touched, the icons will be enlarged and OSD will be displayed.
Setup menu [ Language ] [ Imprinting the recording date ] ƈ There is a choice of languages that can be displayed on the LCD monitor. Even if the battery and AC charger are removed and inserted again, the language setting will be preserved. ƈ There is an option to include DATE / TIME on still images. LANGUAGE sub menu : English, Korean, French, German, Spanish, Italian, S.Chinese, T.
Setup menu [ Auto Focus lamp ] [ Quick view ] ƈ You can turn the Auto Focus lamp on and off. ƈ If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. ƃ Sub menus [Off] : The AF lamp will not light up in a low light condition. [On] : The AF lamp will light up in a low light condition.
Setup menu [ Sound Volume ] [ Shutter sound ] ƈ You can select the sound volume levels of start sound, operation sound and shutter sound. ƈ You can select the shutter sound.
Setup menu [ Delete All ] [ Copy To Card ] ƈ Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. ƈ This enables you to copy image files, movie clips and voice recording files to the memory card. [No] : Cancel the "Delete All". [Yes] : A confirmation window will display. Select the [Yes] menu by pressing the smart button. A [Processing!] message appears and the unprotected files in the DCIM subfolder will be deleted.
Setup menu [ Selecting Video out type ] ƈ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. ƈ Connecting to an external monitor In RECORDING/ PLAY mode, you can view the stored still images or movie clips by connecting the camera to an external monitor via the AV cable.
Important notes Be sure to observe the following precautions! ƈ This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes ƈ Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell of the camera and also affect its performance. Rough handling can damage the LCD monitor.
Warning indicator Low Battery! ϛThere is low battery capacity ƍ Insert a fully charged battery. Low Light! ϛWhen taking pictures in dark places ƍ Take pictures in Flash Photography mode. DCF Full Error ϛViolation of DCF format ƍ Copy the images to a PC and format the memory. Before contacting a service centre ƈ Please check the following The camera doesn’t switch on ϛThere is low battery capacity ƍ Insert a fully charged battery. (p.13) ϛBattery is inserted incorrectly with the polarities reversed.
Before contacting a service centre The images are unclear ϛA picture was taken the subject without setting an appropriate macro mode ƍ Select an appropriate macro mode to take a clear image.
Specifications ƈ Image Sensor - Type : 1/1.8ůCCD - Effective Pixel : Approx. 10.1 Mega-pixel - Total Pixel : Approx. 10.3 Mega-pixel ƈ Lens - Focal Length : Schneider Lens f = 7.8 ~ 39mm (35mm film equivalent : 38~190mm) - F No. : F2.8 - F4.4 - Digital Zoom : · Still Image mode : 1.0X ~ 5.0X · Play mode : 1.0X ~ 11.4X (depends on image size) ƈ LCD Monitor : 2.
Specifications - Movie Clip : · With Audio (recording time : memory capacity dependent, Max. 4GB) · Size : 640x480, 320x240 · Frame rate : 30 fps, 15 fps · 5X Optical Zoom and Mute in Zooming ƈ Storage - Media : · Internal Memory : About 20MB · External Memory (Optional) : SD, MMC(Plus)(2GB guaranteed)/SDHC Card (up to 4GB guaranteed) * Internal Memory capacity is subject to change without prior notice. - File Format : · Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.
Software Notes About the software Please ensure that you read this instruction manual carefully before use. ҮThe attached software is a camera driver and image editing software tool for Windows. ҮUnder no circumstances should all or part of either the software or the user manual be reproduced. ҮCopyrights for software are licensed only for use with a camera. ҮIn the unlikely event of a manufacturing fault, we will repair or exchange your camera.
About the software ƈDigimax Biz Reader : This is the Visiting Card Recognition software solution. You can recognize visiting card and edit namecards database easily with this software. This software is only compatible with Windows. INFORMATION ƃ Be sure to check the system requirements before installing the driver. ƃ To play back the movie taken with this camera on the computer, DirectX 9.0 must be installed.
Setting up the application software 3. To play back a movie clip recorded with this camera on the computer, install the XviD codec.
Setting up the application software 5. After restarting the computer, connect the PC to the camera with the USB cable. 6. Turn on the camera power. The [Found New Hardware Wizard] will open and the computer will recognise the camera. ſ If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was set up successfully.
Starting PC mode ƈ Connecting the camera to a PC ƈ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk ƍ DCIM ƍ 100SSCAM]. The image files will then be displayed.
Starting PC mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. Removing the removable disk ƈ Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. ƈ Windows 2000/ME/XP/Vista (The illustrations may differ from those shown depending on the Windows O/S.) 1.
Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk may be safely removed. Removing the USB Driver for Windows 98SE ƈ To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager. 7. Unplug the USB cable. Setting up the USB Driver for MAC 1.
Digimax Master ƈ You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. ƈ To start the program, click [Start ƍ Programs ƍ Samsung ƍ Digimax Master ƍ Digimax Master]. ƃ Downloading images 1. Connect the camera to your PC. 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded.
Digimax Master ƃ Image viewer : You can view the stored images. ڹ ƃ Image edit : You can edit the still image. ڽ ھ ڹ ڼ ڿ ں ڻ ڼ ں ڻ - Image viewer functions are listed below. ڹMenu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ںImage selection window : You can select the desired images in this window. ڻMedia type selection menu : You can select image viewer, image edit and movie edit functions in this menu.
Digimax Master Digimax Biz Reader ƃ Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ڹ ƈ Digimax Biz Reader is digital business card management software which recognize the information on business card like name, company, telephone number, e-mail and so on. It offers the more effective businesss information management solution with digital camera.
Digimax Biz Reader ƈ Recognizing the namecard image file ƃ Downloading camera's namecard images to computer 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk ƍ DCIM ƍ 100SSCAM]. The image files will then be displayed. * File names assigned in the Biz mode, will be set SB1ZXXXX 3. Downloading camera's namecard images : Refer to page 76 (Downloading stored images). 2. Click the [Open] button. 3.
Digimax Biz Reader ƃ Partial recognizing : Partial recognition function can be used when misrecognition. 1. Select the namecard to partial editing. 2. Drag the area to partial editing in namecard image window, choose the proper field in pop-up window, and then the recognized result is entered to the field automatically. ۀ ڹ ں ڿ ھ ſ Drag only the character area without margin. ſ Refer to the [Help] menu in Digimax Biz Reader for further information.
FAQ ƈ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. ƍ Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. ƍ Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer.
FAQ ƃ When a codec for playing back the movie clip isn't installed, or isn't compatible ƍ Install the codec as listed below. [ Installing codec for Windows ] 1) Insert the CD provided with the camera. 2) Run the Windows Explorer and select [CD-ROM drive:\XviD] folder and click the XviD-1.1.0-30122005.exe file. ſ The XviD codec is distributed according to the GNU General Public License and anyone can copy, distribute and change this codec.
Correct Disposal of This Product Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO MEMO ŝ87Ş
MEMO ŝ88Ş MEMO
SAMSUNG TECHWIN CO., LTD. SAMSUNG FRANCE S.A.S. SAMSUNG OPTO-ELECTRONICS UK LIMITED OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086, 8088, 8090, 8092, 8099 FAX : (82) 31-740-8398 www.samsungcamera.com BP 51 TOUR MAINE MONTPARNASSE 33, AV .DU MAINE 75755, PARIS CEDEX 15, FRANCE HOTLINE PHOTO NUMÉRIQUE : 00 800 22 26 37 27(Numéro Vert-Appel Gratuit) TEL : (33) 1-4279-2200 FAX : (33) 1-4320-4510 www.samsungphoto.
