User Manual

E-6
Accessories
PREPARING FOR INSTALLATION
The following accessories are supplied with the air conditioner:
Note The number of each accessory is indicated in parentheses.
Note If these accessories are supplied, they will be in the accessory box.
General Tools
Batteries for
Remote Control (2)
User’s Manual (1)
The following connection accessories are optional. If they are not supplied, you should obtain them before
installing the air conditioner.
Installation
Manual (1)
Remote Control (1)


Tools required for installation
Tools for test operations
Accessories in the Indoor Unit Case
 Vacuum Pump(Backward flowing prevention)  Manifold Gauge  Stud Finder
 Torque Wrench  Pipe Cutter  Reamer  Pipe Bender
 Spirit Level  Screw Driver  Spanner  Drill
 L Wrench  Measuring Tape
 Thermometer  Resistance Meter  Electroscope
Installation Plate (1)
PE T3 Foam Tube
Insulation (1)
Vinyl Tape (2)
3-wire
Power Cable
2-wire
Assembly Cable
Pipe Clamps A (3) Pipe Clamps B (3) Cement Nail (6) M4 x 25
Tapped Screws (6)
Drain Hose,
length 2m (1)
Putty 100g (1)
Assembly Pipe Indoor Unit

26/35/52/70

: Ø6.35mm (1)

26/35

: Ø9.52mm (1)

52

: Ø12.70mm (1)

70

: Ø15.88mm (1)