User Manual

E-9
ENGLISH
The terminal is connected too firmly , the terminal may be damaged.
Connect the wires firmly so that wires can not be pulled out easily.
(If they are loose, it could cause burn-out of the wires.)
Connect the wires according to color codes, referring to the wiring
diagram.
WARNING
9
Connect the cables to the terminals as seen in the picture.
Note Each wire is labeled with the corresponding terminal number.
10
Connect the grounding conductor to the grounding terminals.
11
Close the terminal board cover by tightening the screw carefully.
12
Connect the power cable to the indoor unit.
Note In Russia and Europe, consult with the supply authority to
determine the supply system impedance before installation.
1(L)
2(N)
F12(N)1(L)
F2
1
2
1 2
F1 F2
F1
F2
F1 F2
Indoor unit
Outdoor unit
Indoor unit
Outdoor unit
CAUTION  End of the wire must be circular.
 After connecting the cables, make sure terminal numbers on
the indoor/outdoor unit matches.
 Screws on terminal block must not be unscrewed with the
torque less than 12kgf•cm
.
Connecting the Assembly Cable
Earth
terminal
INSTALLING THE AIR CONDTIONER