ESPAÑOL Wired Remote Controller ENGLISH USER’S MANUAL EΛΛHNIKA DEUTSCH PORTUGUÊS ITALIANO FRANÇAIS MWR-WH01 RUSSIAN MAGYAR POLSKI NEDERLANDS System Air Conditioner E S F I P D G Ne Po Hu R A DB98-31483A(1) MWR-WH00_IB_E_31218-1.
Safety Precautions • Before using the wired remote controller, read carefully these instructions. • After reading the instructions, keep this user's manual in a handy and safe place. If a user is changed, you must hand over the manuals. • Never attempt to install the air conditioning system or to move the wired remote controller by yourself. WARNING Do not attempt to install or repair this wired remote controller by yourself. This remote controller contains no user-serviceable parts.
ENGLISH Contents WIRED REMOTE CONTROLLER ......................................................... 4 GETTING STARTED ........................................................................... 5 SELECTING THE AUTOMATIC OPERATING MODE .......................... 6 SELECTING THE COOLING MODE .................................................... 7 SELECTING THE DRY MODE ............................................................ 8 SELECTING THE FAN MODE..................................................
Wired remote controller The wired remote controller is installed on the wall.
ENGLISH Getting Started You have just purchased a wired remote controller and it has been installed by your installation specialist. Your User’s Manual contain much valuable information on using your wired remote controller. Please take the time to read them as they will help you take full advantage of the unit’s features. In the manual, you will find a series of step-by-step procedures for each function available.
Selecting the Automatic Operating Mode The room temperature and the fan speed are controlled automatically in the auto mode. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. Result: T he air conditioner will be turned on with the most recently used mode.
ENGLISH Selecting the Cooling Mode Select the cooling mode to lower the room temperature. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. Result: T he air conditioner will be turned on with the most recently used mode.
Selecting the Dry Mode Select the dry mode if the room is too humid. Using this mode will slightly lower the room temperature. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. Result: T he air conditioner will be turned on with the most recently used mode.
ENGLISH Selecting the Fan Mode Select the fan mode to circulate air without changing the temperature. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. Result: T he air conditioner will be turned on with the most recently used mode.
Selecting the Heating Mode The heating mode can be selected only on the heat pump models. Select the heat mode to raise the room temperature. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. The air conditioner will be turned on with the Result: most recently used mode.
ENGLISH Selecting the Quiet Mode Select the quiet mode to run the indoor unit as quietly as possible. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. Result: 2 3 T he air conditioner will be turned on with the most recently used mode. Select the desired operation mode by pressing the button. Press the button to select the Quiet mode. Result: The air conditioner will operate in quiet mode.
Selecting the Sleep Mode Select the sleep mode to sleep in comfort without worrying to turn off the air conditioner in the middle of the night. The air conditioner will turn off automatically after 6 hours. 1 Press the (ON/OFF) button to turn on the indoor unit. - Do not press the (ON/OFF) button if the remote controller is on. Result: 2 Select the desired operation mode by pressing the button. Note 3 T he air conditioner will be turned on with the most recently used mode.
ENGLISH Adjusting the Air Swing Direction Adjust the air swing direction to circulate the air according to various needs. By adjusting the air swing direction, the efficiency of the air conditioner can be increased. 1 Press the Result: button. The blade will start swinging up and down. Press the button again to stop the blade from swinging and set the blade to the desired position. Note The air swing direction cannot be set on duct type indoor units. will be displayed when the button is pressed.
Checking the Room Temperature You can check the current room temperature. 1 Press the button to check the room temperature. Result: The room temperature will be displayed for 3 seconds and return to set temperature display. Note The room temperature may be slightly different depending on the installation location of the remote controller. Locking the Wired remote controller Lock the wired remote controller to prevent it from children and changing the settings unwillingly.
ENGLISH Setting the On Timer You can set the indoor unit, which is connected to the wired remote controller, to turn on at the pre-set time. 1 Press the Result: 2 button to set the On Timer. Default time (0.5 hour) will be displayed and the ‘On’ indicator will blink. If the On Timer is already set, current time will be displayed and ‘On’ indicator will blink. Press the button until you set your desired time. Result: You can set the time between 0.5~24 hours. Note 0.
Setting the Off Timer You can set the indoor unit, which is connected to the wired remote controller, to turn off at the pre-set time. 1 Press the Result: 2 Press the button to set the Off Timer. Default time (0.5 hour) will be displayed and the ‘Off’ indicator will blink. If the Off Timer is already set, current time will be displayed and the ‘Off’ indicator will blink. button until you set your desired time. Result: You can set the time between 0.5~24 hours. Note 0.
ENGLISH Setting the Auto Stop Function The wired remote controller can be set to turn off the indoor unit(s) after a set period of time has passed since any button on the remote controller was last pressed. This function is used to turn off the indoor unit in case the user forgets to turn off the indoor unit. 1 Press the mode. Result: 2 4 The wired remote controller will enter the setup mode and the menu will display . Press the button to enter the Auto Stop setup mode.
Setting the Temperature Limits You can set upper limit/lower limit temperature so that the desired temperature is not set too high or low. 1 Press the mode. Result: 2 Press the Result: 3 5 T he wired remote controller will enter the setup mode and the menu will display . buttons and select menu . Each time the buttons are pressed, menu number increases by 1. Press the button to enter the temperature limit setup mode. Set the lower and upper temperature limit by pressing the buttons.
ENGLISH Locking the Part of the Wired remote controller To prevent the wired remote controller from children and changing settings unwillingly, you can lock some functions of wired remote controller. 1 Press the mode. Result: 2 button for 3 seconds to enter the setup T he wired remote controller will enter the setup mode and the menu will display . Press the Result: buttons and select menu . Each time the buttons are pressed, menu number increases by 1. Press the mode.
MWR-WH00_IB_E_31218-1.