SAMSUNG Q25 BA68-02500A11 040429 Chapter 1 Getting Started This chapter provides basic information for using this computer. System overview and methods for general use are provided.
SAMSUNG Q25 Introducing The Computer Front View LCD Latch LCD Panel Power Button Internet/Wireless LAN button Keyboard Touchpad Touchpad Button Speakers 1-2 SAMSUNG Q25 Manual Status Lights (LED)
Right View USB Port (2.0) Infrared Port Fan Vents Monitor Port Left View USB Port (2.0) Microphone Jack PCMCIA Slot LAN Port Modem port DC-In Port 1394 Port (6 Pin) Memory Card Slot Headphone Jack Chapter 1.
SAMSUNG Q25 Rear View Battery Security Lock Port Bottom View Battery Latches Docking Connector Memory and Mini PCI Module Compartment Note 1-4 SAMSUNG Q25 Manual Wireless LAN module (optional) is installed in the mini PCI compartment.
Introducing the Docking Station (optional) Docking station is an extension device that connects with the computer and allows you to use additional functions including CD drive and various types of ports. Caution You cannot use the LAN port and monitor port on your computer when it is connected to the docking station. Use the ports on the docking station instead. Top View Hook Computer Connector Hook Front View Undock Button Speaker Chapter 1.
SAMSUNG Q25 Right Side CD-RW/DVD-ROM Combo Drive Computer Release Lever Left Side Computer Release Lever 1-6 SAMSUNG Q25 Manual S/PDIF Jack Auxiliary Hard Disk Drive Compartment
Rear View 1394 Port (4 Pin) LAN port PS/2 Port Monitor Port Security Lock Port Security Lock Port Lever USB Ports (2.0) Parallel Port DC-In Port Serial Port Bottom View Woofer (Bass Speaker) Screw To Fix Hard Disk Chapter 1.
SAMSUNG Q25 Turning the Computer On and Off Turning On 1. Insert the battery and connect the power according to the supplied Installation Guide. 2. Lift up the LCD panel and open it to a comfortable angle. 3. Press and then release the power button to turn the system on. Power Button Turning Off 1. Click the Start button on the Taskbar. 2. Select Turn Off Computer. 3. Click Turn Off from the [Turn Off Computer] window.
Creating and Changing User Accounts Multiple users can be registered in a single system so that each user may use their own customized working environment. Procedures to register and change user accounts are provided below. O Registering a new user 1. Click Start > Control Panel. 2. Click User Accounts > Create a new account. 3. Type a name for the new account, and click Next. 4. Select the account type and click Create Account. The new user account has been created. O Changing users 1.
SAMSUNG Q25 Touchpad Movement of the pointer (arrow) on the screen will correspond to movement made with a finger on the touchpad. Touchpad buttons the two buttons below the touchpad provide identical functions to buttons of a mouse. O Click (Select Function) Place a finger on the touchpad, move the pointer on the screen to the icon or item to select, and tap the touchpad once. The click operation is also used to move the ‘cursor’ during document operations.
O Drag (Move / Select) Click and hold the left touchpad button on the point to drag, and drag your finger to the desired location while holding down the touchpad button. This button is held down Place the touchpad pointer on the title bar of the window. O Using the Touchpad Scroll Function The touchpad has a scroll function, which can be used like the wheel dial of a wheel mouse.
SAMSUNG Q25 Using the Keyboard Function Keys Key Numeric Keypad Cursor / Screen Control Keys O Special Function Keys: The key activates special functions when pressed in combination with other keys. Key Combinations Key Name Function Print Screen Saves an image of the current screen in clipboard. System Request In DOS mode, calls another operating system. It does not have specific function in Windows, and exe-cutes predefined function in some programs.
Key Function Screen Adjustment Key Moves up and down pages, or moves the cursor to the start or end of a line. Application Key Provides the right button function of the touchpad. Windows key Display start menu. Chapter 1.
SAMSUNG Q25 Hot Keys Internet/ Wireless LAN button: Launches Internet Explorer or turn wireless LAN on and off. User Key + : Launches a user-defined program. Calculator program is launched as default. Note About wireless LAN button (for models with wireless LAN) For models with wireless LAN, you can use the Internet button to turn the wireless LAN on and off, by completing the following procedures. 1. Turn the computer on, and press to enter Setup. 2.
Status Indicators Icon Name Description Num Lock Turns on when the numeric keypad is activated. Caps Lock Turns on when all alphabet characters you type will be in upper case. Scroll Lock Turns on when it is set to scroll the screen up and down while the cursor position does not change in some applications. Power Turns blue - when the computer is turned on. Blinks - when the computer is in Standby mode. Hard disk drive Blinks when the hard disk drive is in operation.
SAMSUNG Q25 Adjusting LCD Brightness There are 8 levels of LCD brightness (1:Dimmest~8:Brightest). Press +< > or +< > keys from the keyboard to adjust LCD brightness. When changed, the current LCD brightness is displayed on the top left corner of the LCD screen for a few seconds. Whenever you turn the system on or change the power source the brightness level changes according to the settings.
Adjusting the Volume To adjust using keyboard Press +< > or +< > from the keyboard. Using the Volume Control Program On the taskbar, click the Volume ( ) icon, and adjust the slide bars. For advanced volume control options, double-click the Volume ( adjust the settings in the [Master Volume] dialog. ) icon, and Chapter 1.
SAMSUNG Q25 Proper Seating Posture During Computer Use The proper seating posture during computer use is provided here. Maintaining proper posture during computer use enhances performance and prevents physical bodily harm. If necessary, use a footrest to raise the level of your knees and ease the pressure on the thighs. Seating Posture - Position the chair so that the eyes are slightly higher than the display panel. - Straighten the neck and back. - Place the legs naturally.
Chapter 2 Introducing Windows This chapter provides basic information on using the computer’s main operating system Windows.
SAMSUNG Q25P10 SAMSUNG Windows XP Basics Windows is the computer’s main operating system, which needs to be familiarized with in order for efficiently computer use. Windows XP Tour A tour of the elementary functions provided by Windows XP. Click Start > Tour Windows XP. Or click Start > All Programs > Accessories > Tour Windows XP. Click on the topics to find out about important functions of Windows XP. Click the Title. An explanation will appear on the lower part of the screen.
Understanding the Desktop The Desktop is the working area on the computer. It consists of the large workspace, which is more or less the entire the screen and a Taskbar at the bottom. Start Menu Recycle Bin Language Bar Start Button Taskbar System Tray with Clock Start Button Opens the Start Menu. Taskbar Displays programs that are currently running. Frequently used icons can be placed here. Recycle Bin Deleted files or folders are sent here.
SAMSUNG Q25 Understanding the Start Menu The Start Menu includes everything that is required to start Windows. From the Start Menu it is possible to run a program, open a file, assign system users with the Control Panel, receive support by clicking Help and Support, and search desired items from the computer or Internet by clicking Search.
Understanding a Window A window is the basic component in working with the computer. The My Computer window, which is a window for the computer’s hard drive, will be used as an example here to show the basic composition of a window. Click Start > My Computer. Folder Icon Title Bar Close Window Button Menu Bar Maximize Button Minimize Button Quick Task Window Folders Files Click Shared Files or the Local Disk to view the folders and files in it.
SAMSUNG Q25 Help and Support Center Help and Support Center provides references and troubleshooting information regarding computer use. Click Start > Help and Support. Displays Help Index Related help information appears when a search keyword is entered. Help Topics Connect to Support Center. The computer has to be connected to the Internet Computer information can be viewed and the problem can be diagnosed.
Document Operations To create documents, WordPad or NotePad, which is included in Windows, or a separate specialized word processor program can be used, such as MS Word. Instructions for creating documents using WordPad is provided here. O Creating a New Document 1. Click Start > All Programs > Accessories> WordPad 2. Create and edit your document. For more information about WordPad, refer to on-line Help. O Saving a Document 1. Select File from the Menu, and click Save. 2.
SAMSUNG Q25 O Opening a Document 1. 2. 3. 4. Click Start > All programs > Accessories > WordPad. Select File From the Menu, and click Open. Click on the Look in field and specify the folder in which the file is saved. Select the file to open and click Open. O Printing a Document To print a document, connect a printer to the computer. For more information about connecting and configuring a printer, please refer to the printer manual. To print a WordPad document 1. Turn on the printer, and insert paper.
Chapter 3 Using The Computer This chapter investigates various different functions of the computer and provides information on using the related application programs for them.
SAMSUNG Q25 Using the Docking Station (optional) To dock your computer You can dock your computer anytime whether your computer is turned on or off. Caution You cannot use the LAN port and monitor port on your computer when it is connected to the docking station. Disconnect the cables before docking your computer. 1. Place the front part of the computer on the hooks of the docking station. 2. Press the back part of the computer down until the computer clicks into the docking station fully.
To undock your computer O To undock your computer with the power off 1. Turn off the computer. 2. Grab the two computer release levers on the docking station and pull them outward. 3. Separate the computer from the docking station. O To undock your computer with the power on 1. Push the undock button on the docking station or click Start > Undock Computer. 2. After docking release complete message is displayed on the screen, wait about 10 seconds, and separate the system.
SAMSUNG Q25 Using the CD Drive CD-RW/DVD-ROM combo drive is installed in the docking station. To Run a CD 1. Push the eject button on the CD drive. Emergency Eject Hole Eject Button Operation Light 2. When the tray slides out, place a CD onto it and push down until it clicks. 3. Push the CD tray in gently. The CD will run automatically.
Using the Windows Media Player The Windows Media Player enables the user to configure and play video and audio files from the computer or the Internet. Click Start > Windows Media Player. Or click Start > All Programs > Accessories > Entertainment > Windows Media Player. Playlist pane Features Playback Control area Note Windows Media Player tour For more information about using the Windows Media Player, run the Windows Media Player and click Help and Support > Help Topics > Windows Media Player tour.
SAMSUNG Q25 To Play an Audio CD 1. Insert an audio CD into the CD drive, and a list of all available players is displayed automatically. 2. Select Windows Media Player, and click OK to play the audio CD. To Play a Video CD 1. 2. 3. 4. 5. 6. 3-6 SAMSUNG Q25 Manual Insert a video CD into the CD drive. When a video window appears, double-click the MPEGAV folder. Double-click the DAT file. When a warning window appears, click the Open with button.
To Write Data in CD If your computer has CD-RW functionality, you can copy data to a blank CD or create an audio CD. Note An additional CD writing program is supplied in an additional CD. For information about use, refer to the supplied manual. 1. Insert a blank CD into the CD-RW drive. 2. Click Open Writable CD Folder and click OK. The CD-ROM drive window appears automatically. 3. Click Start > My Computer. Chapter 3.
SAMSUNG Q25 4. Select, drag and drop folders or files to copy onto the CD-ROM drive window. Click Write Files to CD in the CD-ROM drive window. CD-ROM drive window 1. Drag and drop folders or files to copy 2. Click Write Files to CD My Computer window 5. When the CD Write Wizard appears, enter the CD label, and click Next. The data will begin copying. 6. When copying is completed, a ‘completed’ message will appear and the CD-ROM drive will open automatically.
Enjoying Home Theater This product supports 5.1 channel output, which is a basic function for home theater systems, and DVD drives. It provides 3D surrounding sound and vivid screen. Note Home theater system usually consists of a TV, DVD, 5.1 channel speaker, and digital amp and provides a high-resolution screen (MPEG2) and 3D surrounding sound (Dolby 5.1 or DTS). With a home theater system, you can enjoy a vivid screen and sound in your home as if you are in a movie theater.
SAMSUNG Q25 ■ Step 2. Configure digital sound output on the computer 1. Click Start > Control Panel > Sounds, Speech and Audio Devices > Sounds and Audio Devices. 2. In the Device volume field on the Volume tab, click Advanced. 3. In the [Master Volume] dialog, click Option > Advanced Controls. Then Advanced button is displayed on the bottom of the dialog. 4. Click Advanced, select “1 SPDIF”, then click Close. ■ Step 3. Enable S/PDIF on the DVD program When using 5.
Using Memory Card Slot Through the memory card slot, you can use memory cards such as memory stick, SD (Secure Digital) memory card, and MMC (Multi Media Card). You can use the memory cards as a removable disk, and use them to exchange data between your computer and digital devices such as a digital camera.
SAMSUNG Q25 2. Click Start > My Computer. The inserted memory card is displayed. 3. You can write data to the memory card. If the memory card is not formatted yet, format the memory card before use. Caution Since the memory card may be easily mislaid when moving your computer, keep the memory card separately. To remove a memory card 1. Press the end of the memory card softly to pop it outward. 2. Remove the memory card.
Working with PCMCIA Cards Various different functions can be added by inserting PCMCIA cards into the system. This system supports 16 / 32 bit, type I or II PCMCIA card types. Caution Before using the PCMCIA slot, remove the slot protector. Push the eject button of the PCMCIA card slot once to pop it outwards. Push the eject button all the way in and the slot protector will be ejected. 1. Insert a card into the PCMCIA card slot on the side of the system. Eject Button 2.
SAMSUNG Q25 Using Samsung Smart Screen Use Samsung Smart Screen program to arrange desktop icons as desired and manage them effectively. 1. Click Start > All Programs > Samsung > Samsung Smart Screen. Note When you launch Samsung Smart Screen for the first time, a dialog box asking whether to register the program as a start program or not appears. If you select OK, the program is automatically launched when you start your computer. 2. Samsung Smart Screen appears.
Chapter 4 Connecting to the Internet This chapter provides instructions on connecting to the Internet.
SAMSUNG Q25 Connecting to the Internet The following options show many ways to connect to the Internet. An appropriate option should be selected depending on the user’s working environment and the user’s system specifications. Option 1 Connecting using a modem and a telephone line Service has to be applied for and received from an Internet Service Provider (ISP) through an Internet service account.
Connecting to the Internet Using a Modem 1. Connect the telephone line to the modem port. Do not use a digital telephone line. 2. To connect the modem to the Internet, and use e-mail, you have to apply to an Internet Service Provider (ISP) for an Internet service. Note For more account information, please contact your ISP. Ask your ISP about Internet fees and the disconnection procedure. If the Internet connection is not disconnected properly, additional telephone charges may incur. Chapter 4.
SAMSUNG Q25 Configuring the Network Environment Settings for Wired LAN Connections A wired LAN environment is an environment where you can connect to the Internet using the company’s LAN or with a broadband modem. 1. Connect the network (LAN) cable to the LAN port of the system. 2. Click Start > Control Panel. 3. Select Network and Internet Connections in the [Control Panel] window. 4. Click Network Connections in the [Network and Internet Connections] window. 5.
7. In the “This connection uses the following items” field, select Internet Protocol (TCP/IP), and click Properties. ① Check the driver ② Select “Internet Protocol (TCP/IP)” ③ Click Properties Note In the above screen, necessary network components can be added by clicking the Install button. 8. Enter the system’s IP and DNS server addresses on the General tab of the [Internet Protocol (TCP/IP) Properties] window.
SAMSUNG Q25 Using Samsung Network Manager Use Samsung Network Manager to configure network setting. Using the program, you can do the following. You can save network settings (including IP address) according to network places such as office and home. When you change places, simply select a network place and the network settings will be automatically changed accordingly. You can easily find out your current IP. O To configure network setting 1. Connect LAN cable to the computer’s LAN port. 2.
5. New place icon is displayed and full dialog box appears. Check your IP and click Close. Network setting is saved. Note To configure network setting of some place other than current place, click the place icon and configure each network device. If you are using DHCP, select ‘DHCP’ check box and click Save. If you are using a static IP, clear ‘DHCP’ check box, enter appropriate network setting and click Save. Ask ISP or network administrator for IP address.
SAMSUNG Q25 Using Both DHCP and Static IP Simultaneously. When you are alternatively using networks with either DHCP or static IP addressing, you can use alternative settings that enable simultaneous configurations of DHCP and static IP to use both of the network connections without reconfiguring. Note This function is provided only when your operating system is Windows XP. 1.
Configuring the Network Environment Settings for Wireless LAN Network (WLAN) A wireless network (Wireless LAN) environment is a network environment that enables communication between multiple computers at home or a small-size office through wireless LAN devices. When a computer-to-computer network has been constructed, a computer that is not connected to the Internet can share the Internet by accessing another computer connected to the Internet. (See Page 4-18.
SAMSUNG Q25 Connecting to an Access Point (AP) This section describes how to connect to an AP. You can use the network when you are connected to an AP. Note The connection setup is described for a computer running on Windows XP Service Pack 1. If you are using the Windows 2000 system, refer to P. 4-15 ‘Wireless Network Setup Using the Wireless LAN Setup Program’. For more detailed information such as the network key (encryption key), ask your network administrator. 1.
Connecting to computer-to-computer networks (peer-to-peer or ad hoc) In computer-to-computer wireless networks, you can wirelessly connect 2 or more computers that have wireless LAN modules. Using this method, a computer that is not connected to the Internet can share the Internet by accessing another computer connected to the Internet. (Refer to “Sharing an Internet connection through a wireless network” (P.4-24).) You can connect by completing the following steps: ▶ Step 1.
SAMSUNG Q25 3. On the Wireless Networks tab, click Advanced. 4. Clear ‘Automatically connect to non-default network’ check box, if it is selected. Select ‘Computer-to-computer (ad hoc) networks only’, and click Close. 5. In the Wireless Networks tab, click Add. 6. Enter the network name (e.g. samsung), and unselect ‘The key is provided for me automatically’. Enter the encryption key in the Network key field, and click OK.
7. Check that the configured network name (e.g. samsung) is in the ‘Preferred networks item’, and click OK. Now your wireless network setup has been completed. Chapter 4.
SAMSUNG Q25 O Step 2. Connecting to the configured computer 1. Right-click on the Wireless Network Connection ( and select View Available Wireless Networks. ) icon on the taskbar, 2. Select the wireless network name (e.g. samsung) specified in ‘Setting up a computer-to-computer network’, enter the encryption key in the Network key field, and then click Connect.
Wireless Network Setup Using the Wireless LAN Setup Program When the operating system of your computer is not Windows XP, you should setup the wireless network settings using an additional wireless LAN setup program (PROSet). To use wireless network connection, complete the following procedures. ▶ Step1. Install the wireless LAN configuration program (PROSet). ▶ Step2. Configure wireless network settings through the wireless LAN configuration program. O Step 1.
SAMSUNG Q25 1. Click Scan in the Networks tab. 2. Select the name of desired access point or computer-to-computer network to connect from the searched available networks list, and click Connect. Note If your desired network does not appear, click Refresh. An access point is represented by ( ) icon, and a computer-to-computer network is represented by ( ) icon. An ( ) icon is displayed in front of an access point or a computer-to-computer network with configured security settings. 3.
• To create a computer-to-computer (Ad Hoc) network To create a new computer-to-computer (Ad Hoc) network or to connect to a hidden access point (Stealth/Closed Mode), refer to the following procedures. Note A hidden access point is an access point that exists, but is configured not to be detected by the scan operation to prevent access attempts from unauthorized users. 1. Click Add in the Networks tab. 2. Enter Profile Name and Network name (SSID), select Operating Mode, then click Next.
SAMSUNG Q25 Using Network Services While the computer is connected to the network, you can use network services to share files, folders, and printers. Using computer-to-computer wireless networks, you can access the Internet through a computer that is connected to the Internet even if your computer is not directly connected to the Internet. Note Network services are provided for the computers that are connected to the network through wired or wireless network connections.
O Step 1. Configuring Sharing 1. Right-click the target file or folder to share in My Computer, and select Sharing and Security. 2. Click ‘IF you understand the security risks but want to share files without running the wizard, click here’. Note It has the same security effect as that of the ‘Network Setup Wizard’. This screen does not appear if Internet Sharing Network Wizard has been installed in the computer-to-computer wireless network environment. 3. Select ‘Just enable file sharing’, and click OK.
SAMSUNG Q25 O Step 2. Using Shared Files or Folders This section describes how to access shared files or folders if your computer is a member of the same workgroup. 1. Click Start > My Computer. Under Other Places, click My Network Places in your computer. 2. Click ‘View workgroup computers’, and click the desired computer to access the shared file. Note If your computer is a member of another workgroup: 1. Click Other Places > Microsoft Windows Network. 2. Click the desired workgroup. 3.
Sharing Printers This section describes how to share a printer between computers connected to a network. To share a printer, complete the following procedures: ▶ Step 1. Configure printer sharing in the computer connected to the printer. ▶ Step 2. Add and use the shared printer in other computers on the network. O Step 1. Configuring Printer Sharing 1. From the computer connected to the printer, click Start > Printers and Faxes. 2. Right-click the printer you want to share, and click Sharing. 3.
SAMSUNG Q25 4. In the Printers and Faxes window, you will find the printer icon has been changed to another icon on a hand. O Step 2. Adding and Using a Shared Printer 1. From a different computer that wants to use the shared printer, click Start > Printers and Faxes. 2. Click Add a printer. 3. In the Add Printer Wizard, click Next. 4. Select ‘A network printer, or a printer attached to another computer’, and click Next. 5. Select ‘Browse for a printer’, and click Next. 6.
7. Read the warning about a shared printer, and click Yes to install the shared printer. 8. Select Yes for ‘Do you want to use this printer as a default printer?’, and click Next. 9. Click Finish. 10. When the printer sharing configuration has been completed, the shared printer appears in the Printers and Faxes window. Now you can print using the shared printer even if your computer is not directly connected to a printer. Chapter 4.
SAMSUNG Q25 Sharing an Internet connection through a wireless network By connecting your computer to another computer, which is connected to the Internet over a wired connection, through a wireless network (Peer-to- Peer), you can access the Internet from your computer. Note To share an Internet connection, the computers should be connected to a computer-to-computer (peer-to-peer) wireless network.
3. In the Advanced tab, select ‘Allow other network users to connect through this computer’s Internet connection’, and click OK. O Step 2. Checking the Shared Internet Connection When the Internet connection sharing configuration has been completed, the network icon in the Network Connections window is displayed as follows: Click Start > Control Panel > Network and Internet Connections > Network Connections. A computer connected to the Internet.
SAMSUNG Q25 Infrared Communication (Optional) Your computer may have infrared port. Using the infrared port, you can transfer data to computer, printer, camera and other devices through infrared communication. Note Restrictions in Use For infrared communication, the devices should have infrared communication capability, and should be located within 1 m of each other. In addition, there should be no obstacle between the infrared ports of the target devices.
Note If you cannot use infrared communication 1. Check BIOS setup. a. Start the computer, and press to enter System Setup. b. Select I/O Device Configuration in the Advanced menu, and press . c. Select Infrared, and set the item to Enabled by pressing or . d. Save the configuration, and exit the Setup. 2. Check Windows configuration. a. Click Start > Control Panel > Performance and Management > System > Hardware tab > Device Manager. b.
SAMSUNG Q25 4-28 SAMSUNG Q25 Manual
Chapter 5 System Management This chapter provides information on efficient computer management.
SAMSUNG Q25 Managing Power Use Power Options to save power consumption. You can switch Standby Mode while you are not using your computer or configure the system components to shut it down on a specified time. Specifying Power Save Time You can specify Turn Off Monitor, Turn Off Hard Disk, System Standby Mode, and Maximum Power Save Mode. Select Start > Control Panel > Performance and Maintenance > Power Options > Power Schemes tab. Then specify time in each item and click OK.
Using the Power button You can configure the function of the power button. Click Start > Control Panel > Performance and Maintenance > Power Options and select the Advanced tab. Configure the Power button function. Configuring the function of the +< combination. Caution > key When the Power button is configured to put the system into Power-Saving Mode, manually shutting down the computer requires the Power button to be pressed and held for more than 4 seconds. Chapter 5.
SAMSUNG Q25 Using the Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power. This computer uses smart rechargeable Lithium-Ion (Li-Ion) battery. Caution Please read the instructions on the battery before use. Please refer to the system operation environment (Page A-2) of this manual and operate and store the battery at room temperature. Ejecting and Attaching Battery 1. Shutdown system and close LCD. 2.
Monitoring the Battery Charge You can check the battery charge status using one of the following two methods: O To monitor in control panel Click Start > Control Panel > Performance and Management > Power Options > Power Meter tab. Power source and remaining battery charge are displayed. Power supply status Remaining Battery Charge O To monitor on the battery Press the PUSH button on the battery. The amount of remaining battery charge (%) is displayed. Slightly press PUSH button.
SAMSUNG Q25 Increasing Battery Life O Adjust LCD Brightness + < > : Dim the LCD display brightness. O Use Power Saving Mode This function reduces power consumption when the system is not being used for a prolonged period of time. O Use Battery Calibration When the battery is in continuous use without being completely charged or discharged, there may be a difference between the displayed battery charge and the actual battery charge, owing to the inherent characteristics of the battery.
Using the Security Lock The security lock is a device used to physically ‘fix’ the system when using it in a public place. The locking device needs to be purchased separately. The shape and methods of use may differ depending on the manufacturer. Please refer to the manual provided with the security lock for proper use. Connect the security lock cable to a fixed object (①), and to the security lock port (②).
SAMSUNG Q25 Upgrading Memory Module Your computer has an installed 128/256 MB memory module depending on your model. There is an empty slot for an additional memory module in the memory compartment on the bottom of the computer. To add memory module, complete the following procedures. Note Before installing memory module, turn off the system completely. Do not install memory module when the system is in suspended mode. 1.
3. Push the memory module in until the module clicks into place. If the memory module is not fixed completely, push the module while pushing the memory module latches outward. 4. Close and fix the memory compartment cover using a screwdriver. Note To remove a memory module After removing the memory compartment cover, push the memory module latches outward to pop the memory module outward. Pull out the module at about 30° angle. Chapter 5.
SAMSUNG Q25 Adding a Hard Disk to the Docking Station Your docking station has a room for an additional hard disk drive (HDD). If you need more storage, you can add a new hard disk by completing the following procedures. To add a hard disk 1. Turn off and detach the computer from the docking station. 2. Place the docking station so that the bottom is up. 3. Remove the screw fixing the hard disk bracket, and pull out the hard disk bracket. 4.
6. Insert the bracket into the hard disk compartment, and fix it using a screwdriver. To format a hard disk If necessary, format the hard disk before use. Caution What is format? Format is an initialization operation to use a hard disk drive. Since format operation deletes all the data in the hard disk, please make sure that there is no important data in the disk before formatting. 1. Click Start > My Computer. 2. Press the right touchpad button on the added hard disk drive (e.g.
SAMSUNG Q25 Traveling with the Computer - When traveling, keep the system and the AC adapter disconnected. Otherwise, it may affect the functions of the system. - When traveling by plane, use a bag designed for notebook PCs and hand-carry the computer. - Allow the computer and disks to pass through security X-rays but do not pass the computer and disks through metal detectors. - Do not use the computer during take off and landing. - Ask the airline about available adaptors for cabin use.
Chapter 6 Customizing your computer This chapter provides information how to use the system setup, customizinig screen settings.
SAMSUNG Q25 Using System Setup System Setup is a utility that enables the computer environment to be changed to suit the user. System Setup is used when changing the system password, booting priority, or when adding new devices. Please use extra care when configuring System Setup, as it may cause serious system error. To enter System Setup 1. Turn on the computer. 2. When the booting screen appears, press . 3. The initial System Setup screen will appear in a moment.
System Setup Menus Menu Items Description Main Configures the basic system environment Advanced Configures OS and major chipset options of the system Security Configures system security options Boot Configures booting options Exit Exits System Setup Note For more information on System Setup menus or options, please refer to Help on the right side of the screen. System Setup Navigation Keys Displays the Help window. Exits the current sub menu or opens the Exit menu.
SAMSUNG Q25 Configuring the Password O Setting the Supervisor Password By configuring a supervisor password, you can restrict system access to authorized users only. Note Do not lose or forget your password. If you have forgotten your password, contact the Samsung service center. 1. Select the Security menu in the System Setup. (To enter into System Setup, see Page 6-2.) 2. On the ‘Set Supervisor Password’ item, press .
O Setting the User Password You can configure user passwords so that other users can use the system. Note Before configuring a user password, a supervisor password must have been configured. Users can start the system with their user password, but cannot enter into the System Setup. Deactivating the supervisor password also deactivates the user password. On the ‘Set User Password’ item, press , and complete step 3-4 of Configuring the Supervisor Password.
SAMSUNG Q25 Changing Booting Priority You can select the booting priority among the devices such as the hard drive, CD-ROM drive, etc. The following example describes how to configure the hard drive as the first booting device when the CD-ROM drive is configured as the first booting device by default. 1. Select the Boot Menu in System Setup. 2. Press on Boot Device Priority item.
Configuring Resolution and Color Depth Screen resolution is the number of pixels displayed on the screen. High resolution makes the overall screen area large, although individual items appear small. Color quality is determined by the number of bits used to represent a pixel on the screen. High color quality displays more number of colors on your screen. 1. Select Start > Control Panel > Appearance and Themes > Change the screen resolution. 2.
SAMSUNG Q25 Using External Display Devices Using external display devices such as monitor or projector, you can view the screen images alternatively or simultaneously. You can extend the screen into two display devices to use larger workspace. Using external display devices would be especially useful when you are giving presentations or watching a video file. 1. Connect a monitor or a projector to the monitor port of the computer or the docking station. 2.
Monitor Displays on an external device such as monitor or a projector. Notebook Displays on the notebook LCD only. Intel(R) Dual Display Clone Displays the same screen on the notebook LCD, and an external device such as monitor or projector. Extended Desktop Extends the screen into the notebook LCD and an external device such as monitor or projector to use a 2 times larger workerspace.
SAMSUNG Q25 Checking for Viruses The Norton AntiVirus software is provided as the virus inspection program. Note When Norton AntiVirus is launched for the first time, the Norton AntiVirus configuration window will be displayed. Read the instruction carefully and proceed with each step. Live Update downloads the latest version of the program through networks. Once this is completed, the first virus examination will start. These steps must be completed in order for Norton AntiVirus to run properly. 1.
Chapter 7 Recovering the Computer This chapter provides recovery procedures using the System Recovery CD when the computer is not operating properly.
SAMSUNG Q25 Restoring the System Note This description is only for models running Window XP. The System Restore function allows you to restore your computer to an earlier copy (called restore point), and restores the settings if a problem occurs. The System Restore function is provided by Windows XP to enable the resolution of various problems without reinstalling Windows XP completely. You can use System Restore in the following cases. · The system files are deleted or damaged by mistake.
O Returning your computer to an earlier restore point The procedures to return your computer to an earlier restore point when a problem has occurred are described below. 1. Start > All Programs > Accessories > System Tools > System Restore. 2. Select ‘Restore my computer to an earlier time’, and click Next. 3. Select the desired restore date (①) from the calendar restoration and select the desired restore point from the list (②), and then click Next.
SAMSUNG Q25 Reinstalling Software If you have reinstalled the Windows operating system, or the system and program do not operate properly, you can re-install the driver and program using the system software CD. Note The drivers and programs included in the system software CD are listed in the D:\ReadMe.htm file. (Provided that the name of CD-ROM drive is “D”.) This computer is optimized for Microsoft Windows XP, therefore driver other than the ones included in the System Software CD are not provided.
Driver Installation Screen O Installing programs 1. In the initial screen, click Application Installation. 2. Click Standard installation in the program installation screen (standard installation is recommended). Program Installation Screen Standard installation: Installs and recovers programs to the state of shipment. User installation: You can select the program installation location, and other options for the program installation. Chapter 7.
SAMSUNG Q25 Reinstalling Windows XP If the Windows XP does not operate properly due to an error in the system, or if you have replaced the hard disk drive, you can reinstall Windows XP using the system recovery CD. Caution With the system recovery CD, you can reinstall Windows XP only. To return the system to the state of shipment, reinstall the device drivers and programs with the system software CD after reinstalling Windows XP with the system recovery CD.
User installation: Enables Windows installation after partitioning or for matting the hard disk drive. Note that all data on the hard disk drives may be deleted depending on your configuration. 3. The description for the standard installation appears. Click Yes. The installation starts, and the system will be restarted after a while. 4. After the system has restarted, the message ‘Press any key to boot from CD’ appears. Do not press any key at this time.
SAMSUNG Q25 O If You Cannot Run Windows If you cannot run Windows, you have to boot the system with the system recovery CD, and reinstall Windows. If you boot the system from the system recovery CD, you can install Windows only with the user installation option. You cannot install with the standard installation option. 1. Insert the system recovery CD into the CD-ROM drive and start the computer. 2. If the following message appears on the screen, press any key from the keyboard.
Q&A This section provides information on possible problems, solutions and other references for system use. Windows Related Q1The system does not shutdown properly. A When the system does not shutdown normally, press and hold the Power button until the system manually shuts off. If the Power-Saving Mode is configured into the Power button, press and hold for more than 4 seconds to shut the system off. When the system is turned on after such manual shutdown, Scandisk will run to check errors in the system.
SAMSUNG Q25 Display Related Q1The LCD screen is blank. A Adjust the LCD screen brightness. Use the + < keys. >, + < > Q2 The screen saver disturbs screen viewing during Media Player or video file operation. A Under the Media Player Options, in Player > Enable Screen Saver During Use, uncheck the box and restart the player. Q3 In DOS mode, changing the full screen DOS mode by pressing ALT+Enter key displays a broken image for a short period.
Q7 I pressed +< > keys, then the screen blinks. A This problem may occur when you pressed +< > keys to convert display devices while there is no external display device connected. Connect an external display device first, then convert display devices. Q8 When I pressed +< > keys to change display devices, the screen resolution is changed. A Change the resolution again on [Graphics Controller Properties] dialog. (Refer to ‘Using External Display Devices’ (P. 6-8).
SAMSUNG Q25 Q12 Desktop is displayed abnormally or some icons disappear while the system is operating. A This problem may occur when you entered hibernate mode while using the Extended Desktop mode, removed the monitor and then pushed power button to exit hibernate mode. When the desktop is displayed abnormally, press right touchpad button on the desktop and click Refresh. When the icons disappear, press +< > or ++ to change the display setting.
Modem Related Q1I cannot hear the modem sound. A1 Check that the telephone line is properly connected to the modem. A2 Check that the modem driver is installed properly. 1. Click Start > Control Panel > Performance and Maintenance > System. 2. Select Hardware tab > Device Manager > Modems in the System Properties window, and check if there is a yellow exclamation mark on the installed modem icon.
SAMSUNG Q25 Otherwise, enter the ATX3 command manually before making a call. It can correct this problem by skipping the dial tone check step. Configuring the Modem through the Control Panel 1. Click Start > Control Panel > Network and Internet Connections 2. Under See Also, click Phone and Modem Options. 3. In the Modems tab, select the installed modem, and click Properties. 4. In the Modem tab of the Modem Properties window, clear the ‘Wait for dial tone before dialing’ check box. 5.
Wired LAN Related Q1 Function. A is a function that activates the system in rest mode when a signal (such as ping or magic packet commands) arrives from network(wired LAN). To use function 1. Click Start > My Computer > My Network Places > View network connections. 2. Click the right button on the touchpad over Local Area Connection, and select Properties. 3. Click Configure..., and select Power Management tab.
SAMSUNG Q25 Wireless LAN Related Refer to “Configuring the Network Environment Settings for Wireless LAN Network (WLAN)” (P.4-9) for the basic uses of a wireless LAN. Q1 The Wireless LAN device is operating properly, but I cannot connect to the Internet or to another computer. This is due to an inappropriate configuration. Check the following check lists: A1 If you are using a computer-to-computer (Ad Hoc) network connection, check that the name of the configured network (SSID) is correct.
Q3 I cannot share an Internet connection. A1 It may require some time to synchronize the computers to share an Internet connection after the Internet connection sharing configuration is completed. If you cannot share Internet connection even after a longer period, restart the computer. A2 Check if the connection between the network adapters is configured to bridge.
SAMSUNG Q25 A4 Verify whether the AP is operating properly. When the AP is not operating normally, turn off the AP and after a short while turn it on again. Verify whether the AP’s firmware is the most recent version. (Contact the AP manufacturer or the place where you purchased the AP for details of the AP firmware.) A5 Verify whether the AP has been properly connected to the network.
Q5 In the Windows XP ‘Available wireless networks’ window, the Wireless Network Connection is displayed as ‘Not Available’. A1 When there is a Wireless LAN button, ensure that the Wireless LAN button is turned on. (Refer to ”Hot Keys” (P. 1-14)) A2 Check if there is additional program for a wireless LAN connection installed. Windows XP supports wireless LAN connections through the Wireless Zero Configuration (WZC) service.
SAMSUNG Q25 Q6 The Wireless network connection operates properly, but the Wireless Network Connection ( ) icon on the Taskbar displays the “Disconnected” message. A This is one of the known problems when you are using a wireless LAN connection after installing Windows XP service pack 1. For more information, refer to the following link for known problems with Microsoft. http://support.microsoft.com/default.
Q10 The network does not operate properly when both the wireless and the wired network connections are simultaneously configured with the same IP address. A You cannot use the wireless and the wired network connections using the same IP address simultaneously. To use either the wireless or the wired network in turn with the same IP address, you have to Disable whichever network device will not be using in the network connection of the Control Panel.
SAMSUNG Q25 If you are using Windows 2000, check that the network authentication mode is configured to Share in the security settings of the wireless LAN program (PROSet). For more network authentication procedures, ask your AP (Access Point) administrator. A4 For a model with an installed 2100 11b card, remove the security patch (Q815485) if it is installed. The WPA Q815485 patch provided by Microsoft can be used only when there is 802.
Game/Program Related Q13D game is not executed, or some functions are not working. A Change the graphic setting of the game to ‘2D’ or ‘Software Renderer’, then execute the program again. Q2I launched a game right after installing it, and the game is not executed. A This problem may occur when the game is not compatible with Windows XP. Launch the game again, and it will be executed properly. Q3When I play a game, the screen is displayed in reduced size.
SAMSUNG Q25 Q7 When I pressed + keys while playing a game, the computer does not operate properly. A Do not press + keys while playing a game, since it may cause a system error. Q8 When I played an audio file (Mid/Mp3/Wave) on Windows Media Player, the screen resolution is changed or the screen is not displayed. A This problem may occur when you press +< > keys or ++ keys while using the Windows Media Player in full screen mode.
Docking Station Related Q1 I cannot replace the docking device when the system is in Standby or Hibernate mode. A Since removing a docking device when the system is in Standby or Hibernate mode causes the system to become unstable, the remove operation is not supported when the system is in this state. Please remove the docking device after the system is no longer in Standby or Hibernate mode. Q2 The Undock button does not work properly.
SAMSUNG Q25 Q7 Replacing a docking device after installing an external CD-ROM drive displays a Collision Sign in the Device Manager (Window2000). A To use an external CD-ROM drive, boot the system with the drive connected to it, or connectthe drive when the docking station has been installed. If a problem arises, reboot your system to resolve the problem.
Appendix Appendix System specifications, software types and safety instructions are provided here.
SAMSUNG Q25 System Specifications The following is the basic hardware specification for the purchased product. Variations may exist depending on the model type. Item Specification Comment CPU Optional Main Chipset Intel Pentium M LV 1.1~1.4GHz / Intel Celeron M ULV 800~900MHz, 1.0~1.1GHz 2MB / 1MB / 512KB L2 cache On board 256 DDR SDRAM (An additional 128/256/512/1024 MB module can be installed, 1DDR socket) Intel 82855GME Hard Disk (HDD) UltraDMA, S.M.A.R.T 9.
Docking Station Specifications Item Specification CD drive CD-RW/DVD-ROM Combo drive (optional) Hard Disk Drive Space For the installation of UltraDMA, S.M.A.R.T 9.5mmH Ports Monitor, LAN (RJ-45), IEEE 1394 (4 Pin), PS/2, Dimension (mm) 274 x 238 x 14.9 (max: 19.6) Weight 760g Comment USB 2.0 x 2, Serial, Parallel, S/PDIF, and DC-In Width x Depth x Height Operation Environment Operation Power Voltage Operation Power Frequency The same as the system.
SAMSUNG Q25 Wireless LAN Specifications (Optional) Intel(R) PRO/Wireless LAN 2100 3B Mini PCI Adapter Item Physical Specifications Specifications Dimensions 59.75 X 44.45 mm (Width X Height) operation temperature Same as system operation specifications and humidity Temperature: 0 ~ 70°C, Humidity: less than 85% Power Saving Mode 135mW Power Receiving Mode 1.0W Specification Transmission Mode 1.6W Power 3.3V Compatibility IEEE 802.
Intel(R) PRO/Wireless 2200BG Network Connection Item Specifications Physical Dimensions 59.75 X 44.45 mm (Width X Height) Specifications operation temperature and humidity Same as system operation specifications Temperature: 0 ~ 70°C, Humidity: less than 85% Power Power Saving Mode Receiving Mode 135mW 0.85W Specification Transmission Mode 1.45W Power 3.3V Compatibility IEEE 802.11g, IEEE 802.
SAMSUNG Q25 Copyright Samsung Co., Ltd. owns the copyright to this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronically, mechanically, or through audio, without the consent of Samsung Co., Ltd. The information in this document is subject to change without prior notice. The manufacturer of this product does not guarantee against data loss. Please ensure that important data is backed up and stored separately to prevent from data loss.
Safety Instructions Instructions for Setup Set up the system on a stable work surface. If the system is dropped it may be damaged or it may inflict injuries on the user. Do not use loose power outlets or damaged power cables. There is a danger of electric shocks or fires. Set up the system in a clean, dry and airy place. If the system overheats, it may be damaged or it may cause fires. Use standard power voltage. High-voltage may result in product damage or cause fires.
SAMSUNG Q25 Instructions for careful handling Handle with care so as not to damage the data in the hard disk. - Since the hard disk is fragile and sensitive to external conditions, it may be damaged from temperature changes or impact during operation. Take extra care to prevent such damages. - Loss of data due to external conditions or carelessness during use is the user’s sole responsibility and the manufacturer shall not be held liable for any compensation.
Use only authorized parts and do not disassemble, repair or modify the computer unless at an authorized dealer. Use authorized service centers as the system may be damaged. Do not touch the power strip with wet hands. There is a danger of electric shock. Place the computer away from heat devices (such as heaters). It may damage the system or cause fires. Clean with cleaners specifically for computers Do not use benzene, paint thinner, or alcohol to clean the computer. It may damage the product.
SAMSUNG Notebook Computer Global Warranty 1. What is Global Warranty System (GWS) ? Warranty Repair Service will be provided by Samsung Electronics Co., Ltd as required during Warranty period. 2. What is process ? a. The GWS service only applies to the regions mentioned below. b. Only products that are subject to GWS, and are within the guarantee period apply. c.
