Operation Manual

PENTAGRAM horNET P 6121-L5 / P 6132-07 / P 6133-10

4. Click Install PENTAGRAM horNet for your adapter. If you are using Windows Vista, the

User Account Control window may display. To proceed with the installation, click

Continue (if you are performing the installation using an account that has no

administrative privileges, you may also need to enter the user name and password for an

administrative account).

5. Select I accept the terms of the license agreement and click Next >.

6. If you wish to install the driver with utility software (recommended), select Install driver

and Ralink WLAN Utility. If you wish to install the driver only, click Install driver only.

Click Next >.

7. If you wish to use the software included with the adapter (recommended), select Ralink

Configuration Tool and click Next >. If you wish to use your system’s wireless network

wizard, select Microsoft Zero Configuration Tool and click Next >.

8. Click Install to install the driver and configuration utility.

9. If a restart is required, select Yes, I want to restart my computer now to restart the

computer after the installation or select No, I will restart my computer later to restart

the computer at a later time. Click Finish to complete the setup wizard.

Installing the adapter

PCI adapter

1. If your computer is powered on, shut down the operating system, then turn the computer

off and disconnect it from mains.

2. Open the computer case and locate an available PCI slot on the motherboard.

3. Insert the adapter into the PCI slot. Ensure that the card’s connector is placed securely in

the slot. It may be necessary to apply force to the card to ensure it is firmly seated. Attach

the adapter to the computer chassis with a screw. Close the case.

4. Attach the external antenna to the adapter’s antenna connector.

5. Turn the computer on and wait for the operating system to launch. Log on, if necessary.

6. If the Found New Hardware Wizard window appears, select Install the software

automatically (Recommended) and click Next. The driver will be installed automatically.