User Guide
Contents Chapter 1. Getting Started 3 6 20 23 28 Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Off Chapter 2. Using Windows 8 31 32 34 36 39 What is Microsoft Windows 8? Screen At a Glance Using the Charms Using Apps Windows Hot Key Function Chapter 3.
Chapter 1.
Before You Start Before reading the User Guide, first check the following information. •• Optional items, some devices and software referred to in the User Guide may not be provided and/or changed by upgrade. Note that the computer environment referred in the User Guide may not be the same as your own environment. •• The pictures used for the cover and the main body in the User Manual are those of the representative model of each series and may differ from the actual appearance of the product.
Before You Start Chapter 1 Getting Started Safety Precaution Notations Icon 4 Copyright Notation Description Warning Failure to follow instructions marked with this symbol, may cause personal injury and or fatality. Caution Failure to follow instructions marked with this symbol, may cause slight injury to yourself or damage your property. © 2013 Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. owns the copyright of this manual.
Before You Start About the Product Capacity Representation Standard About the capacity representation of the storage The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation. (E.g.
Safety Precautions For your security and to prevent damage, please read the following safety instructions carefully. Since this is commonly applied to Samsung computers, some pictures may differ from actual products. Chapter 1 Getting Started 6 Do not install the computer on a slant or a place prone to vibrations, or avoid using the computer in that location for a long time. This increases the risk that a malfunction or damage to the product will occur.
Safety Precautions Chapter 1 Getting Started Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Power Related The power plug and wall outlet figures may differ depending on the country specifications and the product model. Do not touch the main plug or power cord with wet hands. G If the power cord or power outlet makes a noise, disconnect the power cord from the wall outlet and contact a service center.
Safety Precautions Warning Chapter 1 Getting Started 8 AC Adapter Usage Precautions Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Connect the power cord to an outlet or multiple power plug (extended cable) with a ground terminal. Failure to do so may result in electric shock. When the power supply is ungrounded, the current may leak resulting in electric shock.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Battery Usage Related Please charge the battery fully before using the computer for the first time. Keep the battery out of the reach of infants and pets, as they could put the battery into their mouths. There is a danger of electric shock or choking. Use an authorized battery and AC adapter only. Please use an authorized battery and adapter approved by Samsung Electronics.
Safety Precautions Warning Chapter 1 Getting Started 10 Usage Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Never heat the product (or battery) or put the product (or battery) into a fire. Do not put or use the product (or battery) in a hot location such as a sauna, inside a vehicle exposed to the heat, and so on. There is a danger of an explosion or fire.
Safety Precautions Warning Chapter 1 Getting Started Upgrade Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Avoid direct sunlight when the computer is in an air-tight location such as inside a vehicle. There is a danger of a fire hazard. The computer may overheat and also present opportunity to thieves. Do not use your computer for long periods of time while any part of your body is making direct contact with it.
Safety Precautions Warning Chapter 1 Getting Started Security and Movement Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Before upgrading the computer, be sure to shutdown the computer first and then separate all connected cables. If the notebook computer has an external type (removable) battery, separate the battery, too. Failure to do so may cause electric shock. Follow the instructions for the relevant location (e.g.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 13 Battery Usage Related Dispose of worn-out batteries properly. •• There is a danger of fire or explosion. Installation Related Do not block the ports (holes), vents, etc. of the product and do not insert objects. Damage to a component within the computer may cause electric shock or fire.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Usage Related Do not place a candle, light a cigar, etc. over or on the product. There is a danger of fire. Use a wall outlet or multi-plug with a grounding part. Failure to do so may cause electric shock hazard. Make sure to have the product tested by a safety service engineer after repairing the product.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 15 Do not place your face close to the Optical Disk Drive tray when it is operating. There is a danger of injury due to an abrupt ejection. Check CDs for cracks and damage prior to use. If the computer emits smoke, or there is a burning smell, disconnect the power plug from the wall outlet and contact a service center immediately.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 16 To connect a device that is not manufactured or authorized by Samsung Electronics, inquire at your service center before connecting the device. There is a danger of damaging the product. Upgrade Related Carefully touch a part or device of the product. Failing to do so may result in damage to the product or injury.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Cautions on Preventing Data Loss (Hard Disk Management) Take care not to damage the data on a hard disk drive. •• A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk.
Safety Precautions Using the Power Supply in an Airplane Since the power outlet type differs depending on the type of airplane, connect the power appropriately. Since the representative figures of the power plug and the auto adapter are used, they may differ from the actual parts. Chapter 1 Getting Started 18 When Using the AC Power Plug Connect the power plug pins perpendicular into the center of the power outlet.
Safety Precautions Chapter 1 Getting Started When Using the Auto Adapter When a cigar socket is provided, you have to use the auto adapter (optional). Insert the cigar plug of the auto adapter into the cigar socket and connect the DC plug of the auto adapter to the power input port of the computer. Auto Adapter DC Plug Cigar Plug In-flight Cigar Socket When Using the Airplane Charging Coverter Depending on the airplane, you have to use the auto adapter and charging converter.
Proper Posture During Computer Use Chapter 1 Getting Started 20 Maintaining a proper posture during computer use is very important to prevent physical harm. •• Do not use the computer while you are lying down, but only while you are sitting down. The following instructions are about maintaining a proper posture during computer use developed through human engineering. Please read and follow them carefully when using the computer. •• Do not use the computer on your lap.
Proper Posture During Computer Use Chapter 1 Getting Started Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least 50cm. Keep your arm at a right angle as shown by the figure. •• Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. •• Avoid setting the monitor and LCD excessively bright. •• Keep the monitor and LCD screen clean. •• If you wear glasses, clean them before using the computer.
Proper Posture During Computer Use Chapter 1 Getting Started 22 Volume Control (Headphones and Speakers) Use Time (Break Time) Check your volume first to listen to music. •• Take a break for 10 minutes or more after a 50-minute period when working for more than one hour. Illumination Check your volume! •• Do not use the computer in dark locations. The illumination level for computer use must be as bright as for reading a book. •• Indirect illumination is recommended.
Overview Chapter 1 Getting Started 23 Front View •• The pictures used for the cover and the main body in the User Manual are those of the representative model of each series. Therefore the colors and appearance of the pictures may differ from the actual appearance of the product depending on the model. •• The items marked as optional may not be provided or may be provided in different locations. 1 2 3 1 Camera operating This indicates the camera operating indicator (Optional) status.
Overview Chapter 1 Getting Started Status Indicators 1 Fn Lock 2 Caps Lock 24 This indicator displays the On/Off status of the Fn Lock function. On: You can use hot keys without holding the Fn key. Off: You must hold the Fn key before pressing a hot key in order to execute it. This turns on when the Caps Lock key is pressed allowing capital letters to be typed without holding the Shift button down.
Overview Chapter 1 Getting Started 25 Right View 1 2 CD Drive (ODD) 1 (Optional) Plays CD or DVD titles. A CD Drive is optional. The installed drive may differ depending on the model specifications. 2 USB Port You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. 3 Security Slot You can secure the computer by connecting a lock and cable to the Security Slot.
Overview Chapter 1 Getting Started Left View 1 DC Jack A jack to connect the AC adapter that supplies power to the computer. 2 Wired LAN Port Connect the Ethernet cable to this port. 26 The internal heat of the computer is emitted through these holes. 3 Fan Vents 1 2 3 4 5 6 7 8 4 Monitor Port If the vents are blocked the computer may overheat. Avoid blocking the vents as this may be dangerous. A port used to connect a monitor, TV or projector supporting a 15pin D-SUB interface.
Overview Chapter 1 Getting Started 27 Bottom View 1 1 Battery This is a Lithium-Ion rechargeable battery that supplies power to the computer. 2 2 Battery Latches The latch used to remove or install the battery. Memory Compartment The main memory and hard disk drive 3 Cover/Hard Disk Drive is installed inside the cover.
Turning the Computer On and Off Chapter 1 Getting Started 28 Turning the computer on 1 2 3 Connect the AC adapter. Lift the LCD panel up. Press the Power button to turn the computer on. About Windows Activation When you turn the computer on for the first time, the Windows activation screen appears. Follow the activation procedures according to the instructions on the screen to use the computer.
áᔪ Turning the Computer On and Off Chapter 1 Getting Started 29 Ŗᮁ Turning the computer off •• Since the procedures to turn the computer off may differ depending on the installed operating system, please turn the computer off according to the procedures for the purchased operating system. •• Save all your data before clicking on Shut down. 1 ᯲ The Charms menu appears when you place your mouse pointer at the edge of the top or bottom right of the screen.
Chapter 2.
What is Microsoft Windows 8? Chapter 2 Using Windows 8 Microsoft Windows 8 (hereafter referred to as Windows) is an operating system that is required for operating a computer. 31 Searching for Help To use your computer optimally, you need to know how to use it properly. Therefore, It is better to learn how to use Windows by utilizing Windows Help and Support. •• The screen may appear somewhat different depending on the model and the operating system.
Screen At a Glance Chapter 2 Using Windows 8 Windows 8 provides both the new Start screen mode and the Desktop mode of the existing OS. Start Screen 1 Start Screen Refers to the default Start screen of Windows 8. 2 App Refers to the apps that are currently installed. 3 Desktop Displaying the Charms Start Screen When you turn on the computer, the Start screen is displayed, which allows you to use the applications (Application, App, hereafter referred to as an App) at the same location.
Screen At a Glance Chapter 2 Using Windows 8 Desktop This provides similar functions to those provided by the Desktop in prior Windows versions. 1 2 3 2 4  1 Desktop Refers to the Desktop. The Charms is hidden at the right of the screen. Displaying the Place your mouse pointer at the edge of the 2 Charms top or bottom right of the screen to display the Charms.
Using the Charms Chapter 2 Using Windows 8 The Charms is a new type of menu that combines the Start menu with the Control Panel of existing Windows. The Charms allows you to quickly configure the device(s) connected to your computer, search for App(s)/file(s), and use the sharing function, etc. Activating the Charms Search Search Search Share Share Share If you move your mouse pointer to the top or bottom right corner of the screen, the Charms appears.
Using the Charms Chapter 2 Using Windows 8 35 Changing the Settings Frequently used Windows menus are collected. Click the Charms > Settings. Icon Name Function Description Wireless Network You can connect to a wireless network. Select a wireless network to connect to. Adjusting the Volume You can adjust the volume or mute the sound. Screen Brightness ⦽ ⦽ ENG ⦽ You can adjust the screen brightness. Notice You can set the interval at which an App sends notices.
Using Apps Chapter 2 Using Windows 8 An App refers to an application program (hereafter referred to as an App). In a larger sense, it refers to all the software programs installed on the operating system. Windows 8 provides basic Apps for frequently performed tasks. Starting/Exiting an App Click on an App in the Start screen to activate it. To exit the App 1 2 Move your mouse pointer to the top of the screen. Your mouse pointer changes to a hand shape.
Using Apps Chapter 2 Using Windows 8 Running Two Apps at the Same Time Adding/Removing an App to/from the Start Screen 1 2 3 4 Click Start screen > right-click your mouse button. at the bottom of the screen to display all the Click All Apps Apps that are currently installed. Select the Apps in the Start screen. Move your mouse pointer to the top of the screen. Your mouse pointer changes to a hand shape.
Using Apps Using the Windows Store If you run the App Store in the Start screen, the Apps in the Windows Store are displayed. However, a Microsoft account is required to purchase App(s) in the Windows Store. Continue after registering your Microsoft Account in the Charms. Chapter 2 Using Windows 8 38 Configuring your Microsoft Account A Microsoft Account allows you to synchronize your settings with other device(s) running Windows 8 online allowing you to share file(s) or settings.
Windows Hot Key Function You can use the following convenient hot keys in Windows 8. Function Hot Keys Function Description Displaying the Start Screen Windows Key Displaying the Desktop Windows Key + D Switches to Desktop mode. Running the Charms Windows Key + C Activates the Charms. Locking the Screen Windows Key + L Locks the screen. Opening the Ease of Access Center Windows Key + U Opens the Ease of Access Center configuration.
Chapter 3.
Keyboard Chapter 3. Using the computer Shortcut key functions and procedures are discussed in the following sections. •• The keyboard image may differ from the actual keyboard. •• The keyboard may differ depending on your country. The following mainly describes the shortcut keys. Shortcut Keys Press both the Fn key and hot key at the same time. Alternatively, press the Fn Lock key as well as a hot key to use the hot key functions more easily.
Keyboard Shortcut Keys Chapter 3. Using the computer Name Settings 42 Function The Samsung software control program, the Settings, is launched. Screen Brightness Control Controls the screen brightness. CRT/LCD Switches the screen output to the LCD or external monitor when an external monitor (or TV) is connected to the computer. Touchpad Turns the Touchpad function on or off. When using an external mouse only, you can turn the Touchpad off.
Keyboard Chapter 3. Using the computer Other Function Keys •• If you press the Fn Lock key, you can use the hot key functions without pressing the Fn key. •• On: You can use the hot key functions without pressing the Fn key. •• Off: You can use a hot key function by pressing the Fn key + the hot key at the same time. If the hot keys do not work properly, you have to install the Settings. Performs the right-click mouse function (touchpad).
Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse. Chapter 3. Using the computer 44 Click Function Place a finger on the touchpad and click on an item once. Alternatively, press the left button once quickly and release it. •• Touch the touchpad with your fingers only. Anything other than your fingers, such as a ball-point pen, will not be recognized by the touchpad.
Touchpad Chapter 3. Using the computer Right Button Function 45 The Gesture Function of the Touchpad (Optional) This corresponds to clicking the right mouse button. •• The Touchpad Gesture function may not be provided and the version of the function may differ depending on the model. Some usage procedures may differ depending on the version. áᔪ Press the right touchpad button once. The corresponding pop-up menu appears.
Touchpad Chapter 3. Using the computer The Scroll Function Charms Menu Activating Function This function is the same as the scroll area of the Touchpad. If you place your finger on the right edge of the touch pad and drag your finger toward the center, the Charms menu appears. If you place two fingers over the Touchpad and move them up, down, left or right, the screen is scrolled up, down, left or right accordingly.
Touchpad Last Run Window Opening Function Place your finger on the left edge of the touch pad and drag your finger towards the center to activate a previously operating program from among the currently running programs. Chapter 3. Using the computer 47 Touchpad On/Off Function Locking with shortcut keys If you want to use the mouse only without using the touchpad, you can turn the touchpad off. To lock the touchpad function, press the + keys.
CD Drive (ODD, Optional) Chapter 3. Using the computer If your computer does not have a CD drive, you can purchase an external CD drive. 2 When the CD tray opens, insert a CD or DVD and push the tray in until it clicks. 3 Push the CD tray inward until it clicks. 48 •• Do not insert a cracked or scratched CD. Otherwise, the CD may break and damage the optical disk drive when the CD rotates at a high speed. •• When you clean a CD or DVD title, wipe with a soft cloth from inside to outside.
Multi Card Slot Chapter 3. Using the computer Using the multi-card slot, you can read and write data on various types of memory cards. When you insert a memory card, make sure to insert the memory card in the correct direction. Pushing an incorrectly inserted memory card may damage the card itself or the slot. •• You can use memory cards as a removable disk and conveniently exchange data with digital devices such as a digital camera, etc. •• Separately purchase memory cards of your desired capacity.
Multi Card Slot Chapter 3. Using the computer 50 1 Insert a memory card into the multi-card slot in the correct direction. To remove a memory card 2 The following message appears on the top right. Alternatively, push the tip of the card in and then remove it once it pops up. Click to open the folder and click View Files. If a message appears to notify you of any problem, click the corresponding window > Continue without Scanning. You can perform the following process described in No. 3.
Multi Card Slot Chapter 3. Using the computer To format a memory card When using the memory card for the first time, you must format the card before using it. Formatting a card deletes all data saved on the card. If the card includes data, backup the data before formatting it. 1 Click the Windows Explorer Desktop. 2 Right-click over a card drive with the touchpad and select Format. 3 Click Start to the formatting.
Connecting an External Display Device If you connect an external display device such as a monitor, TV, projector, etc., you can view the picture on the wider screen of the external device when you give a presentation or watch a video or movie. Chapter 3. Using the computer About the connection cable Users should additionally purchase the necessary connection cables. The computer provides an analog monitor port (D-SUB) and a digital video/audio port (HDMI).
Ŗᮁ Connecting an External Display Device Chapter 3. Using the computer 53 ᯲ Connecting to the monitor port (Optional) You can experience a wider screen by connecting the computer to a monitor, TV or projector with a monitor port. You can give better presentations by connecting the computer to a projector. 1 Connect the D-SUB port of the computer and the port of the monitor or TV with the monitor cable (15 pin).
Ŗᮁ Connecting an External Display Device Chapter 3. Using the computer 54 ᯲ Connecting through the HDMI port (Optional) By connecting the computer to a TV with a HDMI port, you can enjoy both a high visual quality and a high sound quality. After connecting a TV through HDMI, you have to configure the screen and sound. 1 Connect the HDMI cable to the HDMI port of the TV. External Monitor 2 Select Charms menu > Devices 3& ִփ Select a desired monitor mode. > Second Screen.
Connecting an External Display Device Using AMD Graphics Effectively (optional) PowerXpress is Switchable Graphics technology that selectively enables either the internal or external graphics chipset depending on the program to extend the battery life time while maintaining the graphics performance. Chapter 3. Using the computer 1 Right-click on the Desktop and select Configure Switchable Graphics from the popup menu. 2 Click the Browse button and register the software and click the Apply button.
Connecting an External Display Device Using NVIDIA graphics more efficiently (optional) NVIDIA Optimus is a function that enables automatic selection and usage of the internal or external graphics chipsets depending on the currently running software.
Adjusting the Volume Chapter 3. Using the computer You can adjust the volume using the keyboard and the volume control program. Adjusting the Volume using the Keyboard + Alternatively, press the or áᔪ + Ŗᮁ The procedures to record sound using the Windows Recorder are described below. 1 Connect a microphone to the microphone jack. key combination to 2 Right-click over the Volume icon Recording Device. 3 Check if the microphone is set as the default recording áᔪ device.
Adjusting the Volume Using SoundAlive The SoundAlive function enables you to experience more stereophonic sound using stereo speakers. áᔪ •• SoundAlive is only supported in Windows 8. •• The software programs provider may vary, depending on your computer model. Ŗᮁ •• In addition, some pictures may differ from actual product depending on the computer model and software version. 1 ᯲ Right-click over the Volume and click Play Device.
LCD Brightness Control Chapter 3. Using the computer 59 áᔪ The screen brightness is automatically set to the brightest Ŗᮁ level when AC power is connected and the brightness is automatically set dimmer when the computer runs on battery power to extend the battery use time. ᯲ Controlling the Brightness Usingᰆ⊹the Keyboard 1 2 Click the Charms menu > Settings Adjustment icon . > Screen ᖅᱶ Adjust the brightness with the screen brightness control bar.
᯲ Wired Network Chapter 3. Using the computer ᰆ⊹ A wired network is a network environment used for a company network or broadband internet connection at home. 2 •• Since these descriptions are written on the basis of the latest operating system, Windows 8, some of the content and the figures of the descriptions may differ depending on the operating system. Since the procedures for other Windows operating systems are similar, use the computer referring to these descriptions.
Wired Network 4 Select Internet Protocol Version 4(TCP/IPv4) from the list of Network Components and click Properties. Chapter 3. Using the computer 5 •• The Network Component name may differ depending on the Operating System Installed. •• To add a network component, click Install in the screen shown in the figure above. You can add clients, services, and protocols. 61 Configure the IP settings. When using DHCP, select Obtain an IP address automatically.
Wired Network áᔪ Chapter 3. Using the computer 62 Ŗᮁ Using the WOL (Wake On LAN) function ᯲ is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN). - feature may not work while using Hybrid power saving feature. Hybrid sleep mode can be disabled from Power Options under Control Panel.
Wireless Network (Optional) A wireless network (Wireless LAN) environment is a network environment that enables communication between multiple computers at home or a small-size office through wireless LAN devices. Chapter 3. Using the computer 63 •• The screen figures and terms may differ depending on the model. •• Depending on the program version, some functions may not be provided or different functions may be provided.
Wireless Network (Optional) áᔪ Chapter 3. Using the computer 64 Ŗᮁ Connecting to a Wireless LAN ᯲ 2 If there is an AP, you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows. Click Connect. If a network key is set for the AP, enter the network key and then click OK. ᰆ⊹ 1 For the network key, please ask your network administrator. If you click the Charms menu > Settings > Network Connections icon, a list of available APsᖅᱶappears.
Using the TPM Security Device (Optional) A TPM (Trusted Platform Module) security device is a security solution that protects your personal information by saving the user authentication data on the TPM chip installed on the computer. To use the TPM security device, you have to initialize the TPM chip in the BIOS Setup, initialize the TPM program, and then register the user. •• This function is only supported for models with TPM (security chip).
Using the TPM Security Device (Optional) Initializing the TPM chip 2 When you use the TPM function for the first time or you want to register the user again, you have to initialize the TPM chip. 1 Restart the computer. 66 If the BIOS screen appears, select the Security > TPM Configuration item and press Enter. SysInfo •• Initializing the TPM chip erases all authentication information saved on the TPM chip. Any decision to initialize must be taken carefully.
Using the TPM Security Device (Optional) 5 When the system reboots, press the corresponding key(s) by following the onscreen instructions. 6 When the computer restarts automatically and the Samsung logo screen appears, press the F2 key repeatedly. 7 Select the Security > TPM Configuration > Change TPM Status item and set the item to Enable and Activate. Aptio Setup Utility Security TPM Configuration TPM Support Change TPM Status Security Chip State Press the F10 key to save the changes.
Using the TPM Security Device (Optional) Method 2 1 Turn the computer on and immediately press the F4 key several times. 2 After a moment, the Recovery program runs. 3 Click System Software. 4 When a pop-up window appears to ask you to reboot the system, click Yes. The system starts to reboot. After a moment, the SW Update program automatically runs. 5 Connect to the network. 6 Select TPM Host SW and click Install. 7 After the program is completely installed, click Close.
Using the TPM Security Device (Optional) 3 4 5 Select a Security Platform Feature and set a basic user password. Chapter 3. Using the computer Using the TPM program For more information about using the TPM program, refer to the online help for the program. Complete the registration according to the instructions. The user registration for the TPM program has been completed.
Using the TPM Security Device (Optional) 2 If the Confirm Attribute Changes window appears, select the range to apply the encryption to and click OK. (This dialog box only appears when the folder is encrypted.) 4 Chapter 3. Using the computer 70 You will be able to confirm that the color of the folder (file) name in the encrypted folder has been changed to green. If the current operating system is Windows 8/7, the user account control window appears. In this case, click Continue.
Using the TPM Security Device (Optional) Chapter 3. Using the computer 71 Decrypting an encrypted folder (file) When the virtual drive (PSD) does not appear 1 You can only use the virtual drive (PSD) when you have selected the Personal Secure Drive (PSD) option during the program registration. 2 3 Right-click over an encrypted folder (file) and select Decrypt from the pop-up window.
Using the TPM Security Device (Optional) When the virtual drive (PSD) is not loaded To use the virtual drive (PSD), the virtual drive (PSD) should be loaded first. If it is not loaded, you can load it according to the procedures below. 1 Right-click over the Security Platform icon in the system tray of the Taskbar and select Personal Secure Drive > Load from the pop-up menu. 2 In the load window, enter the basic user password and click OK.
Using the TPM Security Device (Optional) Deleting the virtual drive If a virtual drive has been created, you have to delete the virtual drive before deleting the existing authentication information saved on the TPM chip. 1 2 3 4 5 6 7 Right-click over > Create/Manage. Chapter 3. Using the computer 73 Deleting the existing authentication information saved on the TPM chip.
Samsung Software Update SW Update is a software program that searches for Samsung software programs and drivers installed when you purchased the computer and helps you update any drivers or programs. •• You can check updatable files before performing the update only when you are connected to the internet. •• SW Update does not provide any updates for device drivers or software programs installed separately by the user.
Diagnosing the Computer Status and Troubleshooting The Support Center program, which is Samsung’s computer’s troubleshooting guide, supports diagnosing the system and has a FAQ for frequently occurring problem(s). Support Center may not be provided or may be a different version depending on the model. 1 2 From the Start Screen, right-click any area and select All in the bottom right corner. Then, click Support Apps Center. Support Center is activated and starts diagnosing your computer.
Using the Security Slot You can secure the computer by connecting a lock and cable to the Security Slot. To use this feature, you have to purchase the lock and cable additionally. To use the lock and cable, refer to the product manual. Tie the lock and cable to a fixed object and install the other end of the cable to the security slot. Chapter 3.
Chapter 4.
BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs. •• Use the BIOS setup to define a boot password, change the booting priority, or add a new device. •• Since incorrect settings may cause your system to malfunction or crash, take care when configuring the BIOS. •• The functions of the BIOS setup are subject to change for product function enhancement purposes. •• The BIOS Setup menus and items may differ depending on your computer model. Chapter 4.
BIOS Setup Chapter 4. Settings and Upgrade 79 System Setup Keys The BIOS Setup Screen The BIOS Setup menus and items may differ depending on your computer model. SAMSUNG BIOS Configuration Setup Menu Help Help for the selected item appears automatically. Setup Items Setup Menu Description SysInfo This is a description about the basic specifications of the computer. Advanced Using this menu, you can configure the major chipsets and additional functions.
Setting a Boot Password Chapter 4. Settings and Upgrade 80 If you set a password, you have to enter the password when you turn the computer on or enter the BIOS Setup. 1 Select the Security menu in the BIOS Setup. By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer. 2 In the Set Supervisor Password item, press . 3 Enter a password, press , re-enter the password for confirmation, and press again.
Setting a Boot Password Setting a User Password Using the User Password, you can turn the computer on but you cannot change the major settings of the BIOS Setup because you cannot enter the BIOS Setup. This helps prevent unauthorized access to the major settings in the BIOS Setup menu. Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password.
Setting a Boot Password Deactivating the Password 1 Press on the password to be deactivated. For example, to deactivate a supervisor password in the Set Supervisor Password item, press . 2 In the Enter Current Password item, enter the currently configured password and press . 3 Leave the Enter New Password item field empty, and press . 4 Leave the Confirm New Password field empty, and press . The password is deactivated.
Changing the Boot Priority As an example, the procedures to change the highest boot priority device to the hard disk drive are described below. Chapter 4. Settings and Upgrade 3 83 Press the down key (↓) to move to the SATA HDD item and press the F6 key to move up to the top item. Boot Menu The screen images and terms may differ from actual product depending on the computer model and driver version. [Boot Priority Order] 1. SATA CD : XXXXXXXXXXXX 2.
Upgrading Memory One or more memory modules are installed on the computer. There are 2 memory slots and users can replace the installed memory or add new memory. Chapter 4. Settings and Upgrade 84 Adding or Replacing Memory Modules 1 Remove the screw on the memory compartment cover at the bottom of the computer using a screw driver. •• Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the computer is in Sleep mode.
Upgrading Memory 3 Push the memory module down so that it is completely fixed. If the memory does not fit easily, push the memory module down while pulling the memory module latches outward. Chapter 4. Settings and Upgrade 4 Close the memory compartment cover and fasten the screw. Removing a memory module Pull the memory module latches outward. The memory module will pop up. Remove the memory module out at an angle of 30 degrees.
Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power. A Lithium-Ion smart battery is supplied with this computer. •• Carefully read and follow the precautions printed on the battery before using the battery. •• Before using your computer for the first time after purchasing it, charge the battery completely. Chapter 4.
Battery Chapter 4. Settings and Upgrade Charging the Battery 1 87 Measuring the Remaining Battery Charge Attach the battery and connect the AC adapter to the DC-in jack of the computer. The battery will then start charging. You can view the battery charge status by completing the following procedures. Confirming the battery charge in the Taskbar Disconnect the AC adapter and move the mouse cursor over the battery icon in the system tray of the Taskbar to confirm the remaining battery charge.
áᔪ Battery Chapter 4. áᔪ Settings and Upgrade 88 Ŗᮁ Using the power management program Extending the Battery Usage Time ᯲ This program helps you use the battery more efficiently and supports the power mode optimized for the operating ᯲ environment. Decreasing the LCD Brightness ᰆ⊹ 1 2 Click the Charms menu > Settings Adjustment icon . Ŗᮁ > Screen ᖅᱶ Adjust the brightness with the screen brightness control bar. The battery life will be extended.
Battery Using the Battery Calibration Function When charging/discharging the battery repeatedly for a short time only, the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display. Chapter 4. Settings and Upgrade 3 In this case, the actual battery charge and the remaining charge display will be the same by discharging the battery completely using the Battery Calibration function, and then recharging it again.
Chapter 5.
Recovering/Backing up the Computer (Optional) If a problem occurs with your computer, Recovery (recovery program) allows you to easily restore your computer to the default (factory) settings. Alternatively, you can back up your computer so that you can restore it to your preferred state at any time. 91 •• Recovery may not be provided or may be a different version depending on the model. •• For models whose hard disk or SSD capacity is less than 64 GB, the Recovery program is not provided.
Recovering/Backing up the Computer (Optional) Recovering 3 You can recover your computer to the default (factory) status when your computer does not boot up. 1 Chapter 5. Troubleshooting If the initial menu screen appears, click Recover. Select a recovery point and click Recover. If you set the User Data Maintenance to ON, the computer is restored while maintaining the current user data. - If Windows does not start T urn your computer on and press the F4 key. Run recovery mode.
Recovering/Backing up the Computer (Optional) Recovering after a Backup 2 You can recover your computer after you have backed up your computer to a separate drive or external storage device. Chapter 5. Troubleshooting 93 Click Backup in the Recovery Home screen. Select the drive to save and click Backup. You cannot select a DVD drive. Backing up 1 To back up your computer to an external storage device, connect the external storage device and select the relevant drive. Select the drive to save to.
Recovering/Backing up the Computer (Optional) Recovering You can recover your computer using the backup from the above process. 1 2 3 If the backup image is saved to an external storage device, connect the device. Start Recovery and click Recover. Select a Recover Option and click Recover. Select a point to recover. 4 Chapter 5. Troubleshooting 94 The recover is performed based on the screen instructions. You can use your computer after the recover is completed.
Recovering/Backing up the Computer (Optional) Chapter 5. Troubleshooting 95 To copy the external storage disk When you replace a storage device such as the HDD, SSD, etc. (hereafter referred to as a hard disk) built into your computer, you can move your existing data to the new storage device easily and safely. The new storage device must have sufficient capacity to save your existing data. You need to purchase an external hard USB connector separately to connect the hard disk and your computer.
Recovering/Backing up the Computer (Optional) Export Disk Image Function If you frequently recover your computer to the default (factory) settings, you can conveniently recover your computer after exporting the default (factory) status disk image to an external storage device. 1 2 3 Connect the external storage device, and then select a drive to save to. Click Run. Perform the process by following the instructions to completely save the default (factory) status disk image to the external storage device.
Recovering/Backing up the Computer (Optional) Computer Recovery Function in Windows 8 If a problem occurs with your computer, the recovery program allows you to restore your computer to the default settings. For models where the SSD is less than 64GB, use the Windows System Restore function instead of the Recovery program. 1 Click the Charms menu > Settings > Change PC Settings > General. 2 Click the Start button for Refresh.... or Remove..... Refresh....
Reinstalling Windows (Optional) You can reinstall Windows using the SYSTEM RECOVERY MEDIA for Windows when Windows is no longer working properly. (For models supplied with a SYSTEM RECOVERY MEDIA.) For models supplied with the Samsung Recovery Solution, you can reinstall Windows using the Samsung Recovery Solution. These descriptions are for Windows 7/8 and Windows Vista and for supported models only. Chapter 5.
Reinstalling Windows (Optional) 4 The following window appears, select an installation option. Chapter 5. Troubleshooting 5 If you click Custom, the procedures from Step 5 continue sequentially. If you click Upgrade, the procedures from Step 6 continue sequentially. •• Upgrade Select this option to Upgrade Windows while maintaining current files, configurations and programs.
Reinstalling Windows (Optional) Chapter 5. Troubleshooting Reinstalling when Windows does not start When Windows does not start, boot up with the SYSTEM RECOVERY MEDIA and from there you can reinstall Windows. 1 Insert the SYSTEM RECOVERY MEDIA into the DVD drive and restart the computer. 2 If the Press any key to boot from CD or DVD... message appears while booting, press any key on the keyboard. 3 4 For Windows 7/8, this screen may not appear depending on the version.
Q&A You can look for potential problems that may occur with the system and view the relevant solutions. Also, you may look up any reference(s) required while operating the computer. Recovery Related Q1 A What is a Recovery Area? Samsung computers have an additional partition to recover computers or save backup files. (Only for models with the Recovery.) This partition is called a Recovery Area and it includes a recovery image that comprises of the OS and application programs. Chapter 5.
Q&A Q3 A Q4 A What is a recovery image? This refers to the computer status (including operating system, specific driver(s), software(s), etc.) which is converted to a data image. It is required to recover your computer and is embedded in the computer's hard disk. However, this is not provided for storage devices where the capacity is less than 64 GB due to the small capacity.
Q&A Q4 A Since I'm familiar with Windows 7, I would like the Desktop screen to appear as it does in Windows 7. Currently, there is no way to set the Desktop to appear by default. Chapter 5. Troubleshooting Q7 A Press the Windows key + D key simultaneously to reveal the Desktop when the Start screen appears. This is currently the only workaround. Q5 A Refer to your printer manual for detailed instructions for each model.
Q&A Q9 A I want to remove the pre-installed Windows 8 operating system and install a different OS. If you want to install a different operating system on your PC, you need to change the BIOS settings first. For more information, visit http://www.samsung.com and go to Customer Support > Troubleshooting. Search for Windows 8 and look through the list of search results for the relevant issue. Chapter 5.
Q&A Sound Related Q1 A I cannot hear any sound from the TV after connecting via the HDMI port. 1. Right-click over the taskbar on the Desktop and click Play Device. 2. Change the option to Digital Audio (HDMI), HDMI device, HDMI Output or another option and click Set as Default. Then click OK. Chapter 5. Troubleshooting 105 Others Q1 A You can configure your computer in the same way as existing Windows systems.
Chapter 6.
Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Always follow these instructions to help guard against personal injury and damage to your system.
Important Safety Information Chapter 6 Appendix 108 Care During Use The Instruction On Safety Operation of NotePC •• Do not walk on the power cord or allow anything to rest on it. 1. When installing and operating devices please refer to safety requirements in the user guide. •• Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. •• Some products have a replaceable CMOS battery on the system board.
Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas.
Replacement Parts and Accessories Connect and Disconnect the AC adapter The socket-outlet shall be installed near the equipment and shall be easily accessible. Do not unplug the power cord by pulling the cable only. Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets the requirements for use in the country where you purchased your equipment.
Regulatory Compliance Statements Wireless Guidance (If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections).
Regulatory Compliance Statements • Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service. • Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information.
Regulatory Compliance Statements Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network.
Regulatory Compliance Statements If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices.
Regulatory Compliance Statements Health and safety information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Chapter 6 Appendix 115 SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Regulatory Compliance Statements Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limitesapplicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada.
Regulatory Compliance Statements range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.
Regulatory Compliance Statements La sortie de puissance du dispositif sans fil (ou des dispositifs) qui peut être intégré dans votre système est bien inférieure aux limites d’exposition de RF établies par Industrie Canada. Son utilisation est soumise aux deux conditions suivantes : 1) ce dispositif ne peut pas provoquer d’interférences nuisibles et 2 2) ce dispositif doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer des anomalies dans le système.
Regulatory Compliance Statements European Directives This Information Technology Equipment has been tested and found to comply with the following European directives: •• EMC Directive 2004/108/EC •• Low Voltage Directive 2006/95/EC •• R&TTE Directive 1999/5/EC Chapter 6 Appendix 119 European Radio Approval Information (for products fitted with EU-approved radio devices) This Product is a Notebook computer; low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating
Regulatory Compliance Statements Chapter 6 Appendix EU R&TTE Compliance Statements Česky [Czech] Samsung tímto prohlašuje, že tento Notebook PC je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede Samsung erklærer herved, at følgende udstyr Notebook PC overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Regulatory Compliance Statements Magyar [Hungarian] Polski [Polish] Alulírott, Samsung nyilatkozom, hogy a Notebook PC megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Niniejszym Samsung oświadcza, Ŝe Notebook PC jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Samsung declara que este Notebook PC está Português conforme com os requisitos essenciais e outras [Portuguese] disposições da Directiva 1999/5/CE.
Regulatory Compliance Statements To view the EU Declaration of Conformity for this product (in English only), go to: http://www.samsung.com/uk/support/main/ supportMain.do or http://www.samsung.com/uk/support then search the model number of the product. If the Declaration of Conformity for the model you are interested in is not available on our web-site, please contact your distributor or below address. doc.eu@samsung.com Manufacturer Information Samsung Electronics Co., Ltd.
Regulatory Compliance Statements The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows: General European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz. The low band 5.15 - 5.35 GHz is for indoor use only.
WEEE Symbol Information Correct disposal of this product (Waste Electrical & Electronic Equipment) Chapter 6 Appendix 124 Correct disposal of batteries in this product Pb (Applicable in countries with separate collection systems) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
Samsung Packaging Take-Back Program In partnering with select recyclers, Samsung offers packaging take-back at no cost to you. Simply call the following number for the locations nearest you. CRT Processing, LLC (877) 278-0799 Kathy Severson – Logistics contact Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
Product Specifications The system specifications may differ depending on the derived models. For detailed system specifications, refer to the product catalogue. Intel Dual-Core i3/i5/i7 Processor CPU (Optional) Memory type: DDR3 2 SODIMM Intel HM70 Main Chipset (Optional) Intel HM75 Intel NM70 SSD 7mmH SATA HDD 9.
Product Specifications Registered Trademarks Chapter 6 Appendix ENERGY STAR® Partner As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Samsung is a registered trademark of Samsung Co., Ltd. Intel, Pentium/Dual-Core/Quad-Core are registered trademarks of the Intel Corporation. AMD, Dual-Core/Quad-Core are registered trademarks of the AMD Corporation.
Glossary Chapter 6 Appendix 128 The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup DHCP (Dynamic Host Configuration Protocol) A way to save the current data to restore it later if necessary. A backup is a way to restore computer data when the data or computer is damaged. This refers to automatically allocating IP addresses to the users on the network by the network administrators.
Glossary Chapter 6 Appendix 129 DVD (Digital Versatile Disk) Icon DVD was developed to replace CD (compact disk). Although the shape and size of the disc are the same as that of a CD, the capacity of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD video is digital unlike VHS (analog) video and supports MPEG2 compression and digital audio. To play a DVD, a DVD drive is required. This refers to a small image that represents a file that users can use.
Glossary Network A group of computers and devices, such as printers and scanners, connected by a communications link. A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links. The biggest network is the Internet, a worldwide network. Chapter 6 Appendix 130 PCMCIA( Personal Computer Memory Card International Association) card This is an extended card slot specification for mobile computers such as a notebook computer.
Glossary Chapter 6 Appendix 131 Server TCP/IPv4 In general, a server refers to a computer that provides shared resources for network users. This is a 4 byte (32 bit) address system separated into each byte (8 bits) by a dot and each byte is represented as a decimal number. Share USB (Universal Serial Bus) This refers to setting a resource of a computer such as a folder or printer so that other users can also use it.
Index Chapter 6 Appendix A AP M 63 B Memory 84 Monitor Connection / Output 52 Multi Card Slot 49 Battery 86 BIOS Setup 78 O Booting Priority 83 Overview C P Charge 87 Password Click 44 Product Specifications Supervisor Password 80 SW Update 74 Support Center 75 T Touchpad 23 126 R Double-Click 44 Recorder 57 Drag 45 Recovery 91 Dual View 53 L LCD Brightness S Safety Precautions 59 6 Scroll 46 Security Slot 76 Shortcut Key 41 Status Indicators 24 81
