User guide

1-49
English

supervisor password must have been

password also deactivates the user
password.
In the
Set User Password item, press
< Enter > and complete the procedures from

Setting up a Hard Disk Drive
Password (Optional)

cannot be accessed from another computer.
Press Enter in the
Set HDD Password item



setting function is not provided for
some models.
Changing the hard disk drive
password
For security purposes, you can

password after restarting the
computer by pressing the computer
Power button.
If you cannot change the hard

HDD
Password Frozen message
appears when entering the BIOS
Setup and then selecting Security
> HDD Password , press the Power
button to turn the computer on
again.
Setting Up a Boot Password
To setup a boot password, the administrator
password (Set Supervisor Password) should
be set in advance.
Set the
Password on boot item to Enabled.
Once a boot password is set, you have to
enter a password to boot up the computer.
Deactivating the Password
1
Press < Enter > on the password to be
deactivated. For example, to deactivate
a supervisor password in the
Set
Supervisor Password item, press
< Enter >.
2
In the Enter Current Password item,

and press <
Enter >.
3
Leave the Enter New Password item
 Enter >.
4
Leave the  
empty, and press <
Enter >.
5
In the [ Setup Notice ] window, press
< Enter >.
The password is deactivated.