User Manual (XP)

124
 Complete Restore
1
– When backing up onto DVD
Turn the computer on and insert the
backup DVD into the DVD drive.
If there are multiple backup DVDs,
insert the rst DVD.
– When backing up to another
drive
Proceed to Step 2.
2
Click Start > All Programs >
Samsung > Samsung Recovery
Solution > Samsung Recovery
Solution.
When you cannot start Windows,
turn the computer on and press the
F4 key in the boot screen to enter
restoration mode.
3
When the initial menu screen
appears, click Restore and then click
Complete Restore.
4
Select a Complete Backup
restoration point in the restoration
point selection screen and click the
Next
button. The system is restarted.
5
The restoration progress message
appears after the computer boots up
in restoration mode. If you click OK,
the restoration begins.
If multiple DVDs have been used
for a Complete Backup, whenever
burning a DVD is completed, the
“Insert the next DVD” message will
appear.
6
When the ‘Restart the System’
message appears after the restoration
is complete, click OK to restart the
system. The Complete Restore has
been completed.