User Manual (XP/Windows7)

104
Network Setting
Some of the procedures may differ depending on the version of the operating system.
In addition, the gures of the screens may differ from the actual screens.
Setting Up the Wired Network
1
Connect the LAN cable to the wired
LAN port.
2
Click the network icon .
3
When the Network Wizard appears,
click Advanced.
To use DHCP, click Automatic
(DHCP).
To use a static IP address, click
Manual (M)
, enter the IP Address,
Subnet Mask, Default Gateway
, and
DNS elds and click Finish.
When DHCP is not supported, ask
your network administrator for the IP
address information.
4
When the network is connected, the
icon turns green.
Now, you can use the network.