User Manual (XP/Windows7)

151
Q
I cannot nd an AP.
A Verify whether the Wireless LAN LED
is on.
If it is turned off, turn it on by pressing
the Wireless LAN On/Off button
(Fn
+ ).
Q
The Wireless LAN device is
operating properly, but I cannot
connect to the Internet or to
another computer.
 This is due to an incorrect
conguration, or a conguration
error. Check the following:
A1 When connecting to a wireless Ad-
Hoc network, check if the network
name (SSID) is the same.
A2 If a network key (encryption key) is
used, the AP (Access Point) and
wireless Ad-Hoc network keys must
be the same.
The AP network key can be
congured using an AP management
program. For more detailed
information, ask your network
administrator or product provider.
A3 Check that the device driver is
installed properly. If the driver is
not properly installed, you will nd
a yellow exclamation mark on the
network icon by clicking Device
Manager > Network Adapter.
Q
The signal strength is excellent,
but I cannot connect to the
network.
 Even if the signal strength is
excellent, the network connection
may not operate properly if the
TCP/IP properties are not properly
congured, or the network key
(encryption key) is incorrect.
A1
Check that the TCP/IP properties
are congured properly. When
connecting to an AP, right-click the
Network Connections
icon on
the taskbar and select Network and
Sharing Center. If you click the View
Status
next to a connected wireless
network device and then click the
Detail
button, you can view the IP
information.
Wireless LAN Related