User Manual (XP/Windows7)

122
Restore Function
Not only can you use Samsung Recovery Solution when Windows is running, but
also when you are unable to boot up into Windows. Let’s learn how to use Samsung
Recovery Solution.
Optional functions such as Initial State Image, Initial Status Backup, and Partitioning are
only available in some models.
Partition Setup & Initial Status
Backup
If you turn your computer on for the rst
time, the Initial Status Backup function
is performed after registering Windows.
This function saves an image of the Initial
Status of the C drive to a secure location
so that users can restore the computer
to the Initial Status using the Complete
Restore function. An Initial Status Backup
is only performed once immediately after
the computer is purchased.
1
If you turn the power on for the rst
time, the Register Windows screen
appears. If you register Windows
according to the instructions on the
screen, the computer will be restarted.
2
After the computer has been
restarted, the Partition Setup screen
appears.
To resize the C and D drives, adjust
the partition size using the slide bar
and the click Next.
The Partition Setup function is only
available when the computer is
turned on for the rst time and will
not be available afterwards. Once
you have completed the partitioning,
it cannot be resized. Partition the
disk carefully.
3
The Initial Status Backup screen
appears.
To continue the Initial Status Backup,
click Restart Now
. The computer will
restart.
4
The Initial Status Backup is performed
to backup the initial status of the
C drive to a secure location. This
backup image is used for the
Complete Restore function that
restores your computer to the initial
status.
5
When the Initial Status Backup is
complete, restart Windows.