User Manual (XP/Windows7)

108
1
Select the Boot menu in the BIOS
Setup.
2
Press <Enter> on the Boot Device
Priority
item.
XXXXXXXX
Boot Device Priority
NumLock
Enable Keypad
Summary Screen
Boot-time Diagnostic Screen
Brightness Mode Control
Wireless Device Control
Powersave Mode
Smart Battery Calibration
[Off]
[By NumLock]
[Disabled]
[Disabled]
[Auto]
[Always On]
[Enabled]
3
Press the down key (↓) to move to the
IDE HDD item and press the F6 key
to move the item to the top.
[Boot priority order]
1. USB CD : N/A
2. IDE HDD : XXXXXXXX
3. PCI BEV : N/A
4. USB FDD : N/A
5. USB KEY : N/A
6. USB HDD : XXXXXXXX
7.
8.
[Excluded from boot order]
- USB ZIP : N/A
- USB LS120 : N/A
- PCI SCSI : N/A
- Other USB : N/A
- PCI : N/A
Boot Device Priority
4
Press the F10 key to save the settings
and exit Setup.
The highest boot priority device is
now set to the Hard Drive.
Changing the Boot Priority
This computer is congured to boot from an external-type ODD rst.
This chapter describes how to change the boot priority so that the computer boots from
the hard disk drive rst.