User Manual

24_ using advanced functions
using advanced functions
SETTING TIMER
mode
mode allows you to set a comfortable sleep temperature while saving energy and
having sound sleep. mode can be set up when the air conditioner is on.
1. Set the operating mode.
Press the Mode button on the remote control until Cool/
Heat appears on the remote control display.
is only available in Cool/Heat mode.
2. Press the button on the remote control.
indicator appears and Off timer indicator
starts blinking on the remote control display.
3. Set the length of time you want the air conditioner to stay
on.
Default time is set to 8 hours. Press the
Up or Down button on the remote control to change the
time setting while Off timer indicator is blinking.
You can set the time up to 12 hours, increasing in
30 minute unit up to first 3 hours and in hourly unit after
first 3 hours.
4. Press the Set/Cancel button on the remote control to
active it on.
The remote control display will show the hour(s) you have set.
When the set time has elapsed, the air conditioner will automatically turn off and
then indicator disappears.
If mode is not set within 10 seconds, the air conditioner will end setting.
• Temperature/Fan speed/Air swing can be adjusted after setting in Heat
mode.
• Temperature can be adjusted and the air conditioner automatically adjusts the Fan
speed/Air swing after setting in Cool mode.
AVXWV£ª£ª_IB IM_E_29812.indd 24 2008-11-12 13:42:39