Quick Guide

STEP 2. ACCESSING THE POWER CORD CONNECTION
Remove the rear access cover and loosen the screw with a screwdriver. The terminal block will then be
accessible.
Access cover
Terminal block
Specified power-supply-cord kit rating
Range rating, watts
Specified rating of
power-supply-cord
kit, amperes
Diameter (inches) of range
connection opening
120 / 240 volts 3-wire 120 / 208 volts 3-wire Power cord Conduit
8,750 - 16,500 7,801 - 12,500 40 or 50A 1
3
/8" 1
1
/8"
STEP 3. INSTALLING THE POWER CORD
For power cord installations, hook the strain relief over the power cord hole (1
3
/8") located below the
rear of the drawer body. Insert the power cord through the strain relief and tighten the device.
Strain relief
Power cord
Conduit connection plate
• You must install the power cord with a strain relief.
• Attach the strain relief to the 1
3
/8" opening in conduit connection plate.
English - 6
Install_30_Electric_Range_USA_DG68-00108G-10_EN+MES.indb 6 2020-03-12  11:26:33