FULL MANUAL MX-T70 Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
SAFETY INFORMATION SAFETY WARNINGS WARNING •• To reduce the risk of fire or electric shock, do TO REDUCE THE RISK OF ELECTRIC SHOCK, DO not expose this appliance to rain or moisture. NOT REMOVE THE COVER (OR BACK). CAUTION NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE •• TO PREVENT ELECTRIC SHOCK, MATCH WIDE PERSONNEL. BLADE OF PLUG TO WIDE SLOT, FULLY Refer to the table below for an explanation of INSERT. symbols which may be on your Samsung product.
PRECAUTIONS 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery 1. Ensure that the AC power supply in your in the general household trash. Do not house complies with the power expose the battery to excess heat, direct requirements listed on the identification sunlight, or fire. Do not short circuit, sticker located on the rear of your product. disassemble, or overheat the battery.
CONTENTS 01 Checking the Components Inserting Batteries before using the Remote Control (AAA batteries X 2) 02 03 04 05 -------------------------- Product Overview 2 3 Top Panel of the Party Audio -------------------------- 3 Rear Panel of the Party Audio -------------------------- 4 Connecting the Party Audio 6 Connecting Electrical Power -------------------------- 6 How to use Audio Group -------------------------- 7 Connecting an External Device 12 Connecting using an Analogue A
07 Using the Samsung Giga Party Audio app 21 Install Samsung Giga Party Audio App -------------------------- 21 Launching the Samsung Giga Party Audio App -------------------------- 21 08 Troubleshooting 22 09 Licence 23 10 Open Source Licence Notice 23 11 Important Notes About Service 23 12 Specifications and Guide 24 Specifications -------------------------- 24 ENG - v
01 CHECKING THE COMPONENTS Party Audio Main Unit Remote Control / Batteries Power Cord •• For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Rear of the Party Audio Main Unit) •• To purchase additional components or optional cables, contact a Samsung Service Centre or Samsung Customer Care. •• When moving the product, do not drag or pull the product from the ground. Lift the product when moving the product.
02 PRODUCT OVERVIEW Top Panel of the Party Audio BASS Remote Sensor When operating the Party Audio system, please aim the front of the remote control at the remote sensor. Display Window Displays operating messages or current status of the Party Audio system. Power Turns the Party Audio on and off. Light Press the (Light) button to turn the Lighting Mode on.
Volume down Volume up BASS Press the (Volume down) button to lower the volume. Press and hold the (Volume down) button to quickly lower the volume. Press the (Volume up) button to raise the volume. Press and hold the (Volume up) button to quickly raise the volume. Press the BASS button to use the powerful bass sound. Press it again to return to the normal sound. Press and hold the BASS button for more than 5 seconds to turn on or off the BLUETOOTH POWER function.
ECHO1 You can give an echo effect to the sound from a connected microphone (MIC1) by adjusting the ECHO1 knob. If you turn clockwise, the echo effect goes up, and if you turn counter-clockwise, the echo effect goes down. VOL1 Use the VOL1 knob to adjust the volume of a connected microphone (MIC1). If you turn clockwise, the volume goes up, and if you turn counter-clockwise, the volume goes down. MIC1 Connect your microphone to the MIC1 jack.
03 CONNECTING THE PARTY AUDIO Connecting Electrical Power Use the power cord to connect the Party Audio to an electrical outlet in the following order: Connect the power cord to the Party Audio and then to a wall socket. See the illustrations below. •• For more information about the required electrical power and power consumption, refer to the label attached to the product.
How to use Audio Group You can connect multiple audio systems in a group to create a party environment and produce higher sound output. Set one Party Audio as the host and any music played on it will be shared among any other Party Audio systems in the Audio group.
Connecting the wireless Group Play mode You can connect up to ten Party Audio systems with the wireless Group Play function. GROUP PLAY GROUP PLAY GROUP PLAY Slave 1 Slave 2 Host 1. Press the GROUP PLAY button on the Host Party Audio system. The “HOST” message appears on the display of the host Party Audio and the LED blinks on the GROUP PLAY button. 2. Press the GROUP PLAY button on the 2nd Party Audio system (Slave 1).
•• All slave units must be connected one by one. For example, after Host is connected, press GROUP PLAY button on slave 1 to connect, and after slave 1 is connected, you should connect slave 2 and slave 3 one by one sequentially. •• While using Group Play, currently connected Bluetooth devices are disconnected and Bluetooth connection is disabled. •• Bluetooth devices can search and connect with the host Party Audio only. •• When in Group Play mode, the slaves cannot connect to a Bluetooth device.
Using the Stereo Group mode You can enjoy stereo sound by connecting two Party Audio systems. ADD STEREO ADD STEREO Left Party Audio (Master) Right Party Audio (Slave) 1. Press the ADD STEREO button on the left Party Audio system. The “ADD STEREO” message appears on the display and the LED blinks on the ADD STEREO button. 2. Press the ADD STEREO button on the right Party Audio system. The “ADD STEREO” message appears on the display and the LED blinks on the ADD STEREO button. 3.
•• While in Stereo Group mode, currently connected Bluetooth devices are disconnected and Bluetooth connection is disabled. •• If you select any source other than BT or power cycle the master Party Audio, the Stereo Group mode is disconnected. •• This product does not support aptX audio stream with Wireless Group Play mode. •• If you try to connect a Bluetooth device while Stereo Group is connecting, the Stereo Group mode may fail. Disconnecting the Stereo Group mode 1.
04 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired or wireless network to play the external device’s sound through the Party Audio. Connecting using an Analogue Audio (AUX) Cable BD / DVD player / Set-top box / Game console Rear of the Party Audio R - AUDIO - L L L IN OUT R R AUX 1 AUX 2 / GROUP PLAY Audio (AUX) Cable (not supplied) 3.5 mm stereo cable (not supplied) Mobile device / MP3 / PMP 3.5 mm stereo Cable (AUX1) 1.
Connecting a mobile device via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. LIGHT AUX USB PAIRING ADD STEREO USB1 (5V 2.1A) OR GROUP PLAY PAIRING EFFECT Bluetooth device TEMPO USB2 SOUND (5V 0.5A) MODE DOWN DJ EFFECT UP The initial connection 1. Press and hold the PAIRING button on the remote control for more than 5 seconds to enter the “BT PAIRING” mode.
Bluetooth Multi connection The Party Audio can be connected to 2 Bluetooth devices at the same time. Bluetooth device 1 Bluetooth device 2 1. Connect the Party Audio to up to two Bluetooth devices. (See page 13) 2. If you attempt to connect a 3rd Bluetooth device, the 1st and 2nd devices will disconnect. 3. Play music from one of the connected Bluetooth devices while two devices are connected. The other device will automatically pause.
•• Bluetooth Multi connection may not be supported depending on the connected device’s specifications. •• Removable/detachable Bluetooth devices (Ex:Dongle etc..) ,windows phone, laptops, TV, etc. do not support Bluetooth Multi connection. •• After Bluetooth Multi connection pairing, there may be a slight delay before music starts playing depending on the Bluetooth devices.
05 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Party Audio. Rear of the Party Audio USB2 (5V 0.5A) USB1 (5V 2.1A) OR USB storage device (not supplied) 1. Connect a USB storage device to the USB1 or USB2 jacks on your Party Audio. 2. Press the (Source) button on the top panel or on the remote control, and then select “USB1” or “USB2”. •• You can also select a source using USB button on the remote control. 3.
Supported Audio Formats File Extension *.mp3 *.wma *.aac *.wav *flac Audio Codec Sampling Rate Bit Rate MPEG 1 Layer3 32 kHz ~ 48 kHz 32 kbps ~ 320 kbps MPEG 2 Layer3 16 kHz ~ 24 kHz 8 kbps ~ 160 kbps MPEG 2.
06 USING THE REMOTE CONTROL How to Use the Remote Control LIGHT PAIRING AUX USB EFFECT LIGHT Power DJ Press the (LIGHT) button to turn the Lighting Mode on. Press the button repeatedly to cycle through LIGHT AUX USB the available light modes: AMBIENT, PARTY, PAIRING EFFECT DJ DANCE, THUNDERBOLT, STAR or OFF.
LIGHT AUX USB PAIRING AUX USB PAIRING SOUND MODE LIGHT Press the TEMPO + or TEMPO - buttons to change the tempo of the music up or down. TEMPO•• This function only works in the USB1 and USB2 mode. TEMPO LIGHT SOUND MODE EFFECT TEMPO +, USB - AUX USB DJ PAIRING EFFECT This function lets you turn on the DJ effect function. AUX TEMPO Press the button repeatedly to cycle through the available DJ sound effects: NOISE,TEMPO FILTER, CRUSH, CHORUS, WAHWAH or OFF.
BASS Repeat BASS BASS Press the (Repeat) button to use the Repeat function in “USB1”and “USB2” mode. Press the button repeatedly to cycle through the available repeat functions: ONE, FOLDER, ALL, RANDOM or OFF. Press the BASS button to use the powerful bass sound. Press it again to return to the normal sound. Press and hold the BASS button for more than 5 seconds to turn on or off the BLUETOOTH POWER function.
07 USING THE SAMSUNG GIGA PARTY AUDIO APP Install Samsung Giga Party Audio App To control this product with your Smart Device and the Samsung Giga Party Audio app, download the Samsung Giga Party Audio App from the Google Play Store or Apple App Store, and install it on your Smart Device. NOTES •• The Samsung Giga Party Audio app is compatible with Android mobile phone devices running Android OS 6.0 or later. •• The Samsung Giga Party Audio app is compatible with Apple mobile devices running iOS 10.
08 TROUBLESHOOTING Before seeking assistance, check the following. The unit will not turn on. It cannot make a Bluetooth connection. Is the power cord plugged into the outlet? ;; Connect the power plug to the outlet. Is the system connected to another system in wireless Group Play mode or Stereo Group mode? ;; Try Bluetooth connection again after disconnecting the wireless Group Play or Stereo Group connection.
I can’t connect a slave to Group play. ;; After 1 hour, the host will block any additional slaves from being added. Press the GROUP PLAY button on host, after it display “HOST” message, the slave can be reconnected. It cannot make a “Wireless/Wired Group/Add Stereo/Bluetooth” connection. Qualcomm aptX is a product of Qualcomm Is the distance between systems too far? ;; It is recommended to make a “Wireless/ Wired Group/Add Stereo/Bluetooth” pairing within 1 meter from the system.
12 SPECIFICATIONS AND GUIDE Specifications Model Name MX-T70 USB1: 5V/2.1A USB1/USB2 USB2: 5V/0.5A Weight 26.5 kg Dimensions (W x H x D) 463.0 x 884.0 x 455.0 mm Operating Temperature Range +5°C to +35°C Operating Humidity Range AMPLIFIER Rated Output power 10 % ~ 75 % Tweeter 150W x 2, 12 ohm Middle 300W x 2, 6 ohm Woofer 600W x 1, 3 ohm NOTES •• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. •• Weight and dimensions are approximate.
© 2019 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Centre. Country /Area Contact Centre Web Site ` Asia Pacific CHINA 400-810-5858 www.samsung.com/cn/support TAIWAN 0800-329-999 0809-00-5237 ( B2B / Dealer) www.samsung.com/tw/support HONG KONG 3698 4698 MACAU 0800 333 www.samsung.com/hk/support (Chinese) www.samsung.
