User Manual
Table Of Contents
- MX-T40_ENG
- 01 Checking the Components
- 02 Product Overview
- 03 Connecting the Sound Tower
- 04 Connecting an External Device
- 05 Connecting a USB Storage Device
- 06 Using the Remote Control
- 07 Using the Samsung Sound Tower (Giga Party Audio) App
- 08 Troubleshooting
- 09 License
- 10 Open Source License Notice
- 11 Important Notes About Service
- 12 Specifications and Guide
- MX-T40_SPA
- 01 Revisión de los componentes
- 02 Descripción del producto
- 03 Conectando el Sound Tower
- 04 Conectar un dispositivo externo
- 05 Conectar un dispositivo de almacenamiento USB
- 06 Funciones del control remoto
- 07 Uso de la aplicación Samsung Sound Tower (Giga Party Audio)
- 08 Solución de problemas
- 09 Licencia
- 10 Aviso Sobre Licencia de código abierto
- 11 Nota Importante Sobre el Servicio
- 12 Especificaciones y guía
ENG - 5
ADD
STEREO
Press the ADD STEREO button to connect to another Sound Tower wirelessly.
Press the ADD STEREO button again before connecting another Sound Tower to exit
Stereo Group mode. When the connection is made, you can enjoy stereo sound.
Press and hold the ADD STEREO button for more than 5 seconds to disconnect the Stereo
Group mode.
GROUP
PLAY
Press the GROUP PLAY button to connect up to ten Sound Tower systems wirelessly.
Press the GROUP PLAY button again before connecting other Sound Tower to exit
wireless Group Play. When the connection is made, you can use multiple Sound Tower
systems at the same time using Group Play mode. Press and hold the GROUP PLAY
button for more than 5 seconds to disconnect the wireless Group Play mode.
USB
Connect a USB device to the USB port on the main unit.
• Press the (Source) button to select USB.
GROUP
PLAY OUT
Terminals
Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the main
unit to Audio In on an external analog output device.
• Be sure to match connector colors.
• If the external analog output device has only one Audio In jack, connect either left or
right.
AUX2/
GROUP
PLAY IN
Terminals
Use an Audio Cable (not supplied) to connect AUX2 (IN) terminals on the main unit to
Audio Out on an external analog output device.
• Be sure to match connector colors.
• If the external analog output device has only one Audio Out jack, connect either left or
right.
• Press the (Source) button to select AUX2.
• If the product is in AUX2 mode with no playback and no command input for more than
20 minutes, the system will turn off.
• If the product is in AUX2 mode with playback for more than 8 hours and no command
input, the system will turn off.
AUX1
Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to Audio
Out on an external device.
• If the product is in AUX1 mode with no playback and no command input for more than
20 minutes, the system will turn off.
• If the product is in AUX1 mode with playback for more than 8 hours and no command
input, the system will turn off.
Power
Connect the power cord to the Power jack and connect the other end of the power cord to
a wall socket to supply electrical power to the Sound Tower.