User manual
12 English English 12
English 13
Recording Speed
• When the USB memory is not enough, it will be displayed
“NOT ENOUGH MEMORY”.
• The recording works if the USB device or the HDD is
formatted in the FAT file system. (The NTFS file system is
not supported.)
• When you use CD high speed search function, the CD
recording can’t work.
• Sometimes, the recording time may be longer with some
USB devices.
• In the program mode, you can't use the CD recording
function.
• When the CD recording, the EQ and GIGA SOUND
functions can not work and automatically change to OFF.
• When the CD recording, the REPEAT function can not
work and automatically changes to OFF.
• If you use the MIC function during the CD recording, the
voice from the microphone will be recorded.
• You can not record the radio when searching or no
available frequencies in the Tuner mode.
• Note that setting the input level too loud when recording
music from an external device through the AUX and USB
channel may introduce noise into the recording. In that
case, lower the external device’s volume level.
You can select the recording speed before recording.
Each time you press the CD REC SPEED button
on the remote control, the recording speed will
change as following:
RECORD SPD x 1
;
RECORD SPD x 4
• While the
TunerorExternalSourceisrecording,the
recordingspeeddoesnotsupported.
• Whe
nyouselectRECORD SPD x 4,theaudiosoundwill
notbeoutput.
• If you connected the Microphone, you just have one recording
speed mode: RECORD SPD x 1.
• During recording, if you disconnect the Microphone, the
recording will stop, even if you reconnect the Microphone, it
will still stop.
You can directly select the user EQ mode by press
the USER EQ button.
1. Press the USER EQ button on the main unit until
the required option is selected.
Each time you press this button, the sound mode
will
switch as following:
OFF
;
U1 B 0
;
U2 B 0
;
U3 B 0
2. You can refer the above to set the BASS, MIDDLE,
TREBLE level.
Selecting USER EQ Mode
Your mini-compact
system supports the
predefined equalizer settings between high and
low frequencies to be in harmonious with the
current music genre.
1. Press the EQ button.
Each time you press this button, the sound mode
will
switch as following:
OFF
;
FLAT
;
RANCHA
;
SAMBA
;
CUMBIA
;
HABANA
;BOOMBA;REGGAE;PARTY;POP ;HIPHOP
;ROCK;JAZZ;CLASS;STA+EQ;DYN+S;MP3+
;VIR+S;U1 B 0 ; U2 B 0 ; U3 B 0
2. Set the BASS, MIDDLE, TREBLE level.
Press the ENTER button when you select the
U1 B 0
;
U2 B 0
;
U3 B 0
Result: The BASS level flash.
Press the TUNING/ALBUM
, or .
button to select
from -06 to 06.
Press the ENTER button.
Result: The MIDDLE level flash.
Press the TUNING/ALBUM
, or .
button to select
from -06 to 06.
Press the ENTER button.
Result: The TREBLE level flash.
Press the TUNING/ALBUM
, or .
button to select
from -06 to 06.
Press the ENTER button.
Result: setting is completed.
Selecting EQ Mode
• When CD Recording, the EQ/USER EQ function can't work
and the EQ/USER EQ automatically switches to "OFF"
mode.
• If no buttons is pressed within 8 seconds, your settings will
automatically be cancelled and the previous settings will be
saved.
• The EQmodemaybedifferentdependingonyourregion.
The GIGA Sound Function amplifies bass and improves
bass twice as much for you to appreciate powerful real
sound.
1. Press the GIGA SOUND BLAST button on the
main unit or the SOUND button on the remote
control. Each time press this button, the sound
will
switch as following:
ADAPTIVE
;
OFF
;
GIGA SOUND
2. To cancel this function, press the GIGA SOUND
BLAST button until the “OFF” is displayed.
• The GIGA SOUNDmodemaybedifferent
dependingonyourregion.
GIGA SOUND function
You can directly select the Dynamic spot mode for
listening music.
1. Press the DYNAMIC SPOT button on the main unit.
Each time you press this button, the sound mode will
switch as following:
DYN+S
;
OFF
• The DYNAMIC SPOTmodemaybedifferent
dependingonyourregion.
Using the DYNAMIC SPOT Mode
MX-E750-E760-E761-E770-E771-0417.indd 13 2012-4-24 18:04:13
Downloaded From Disc-Player.com Samsung Manuals










