Laser Facsimile User’s Guide Msys 6750
Trademarks • Windows is a trademark of Microsoft Corporation. • IBM is a trademark of International Business Machines. • Centronics is a trademark of Centronics Data Computer. • Other names and trademarks mentioned in this manual are trademarks of their respective holders.
Contents Chapter 1 Getting Started Setting up your machine ________________________________ 1.2 Unpacking ____________________________________________ 1.2 Control locations and functions __________________________ 1.3 Front view ___________________________________________ 1.3 Rear view ___________________________________________ 1.4 Inside _______________________________________________ 1.4 Choosing a location ____________________________________ 1.
1 Getting Started Chapter 2 Operation 2 Using the control panel _________________________________ 2.2 Using the number keypad _______________________________ 2.4 Entering alphanumeric characters _______________________ 2.4 Entering numbers _____________________________________ 2.6 Editing numbers or names _____________________________ 2.6 Inserting pause _______________________________________ 2.6 Troubleshooting Appendix ii 3 Receiving a fax _________________________________________ 2.
Chapter 2 Operation (Continued) Mail box ______________________________________________ 2.21 Confidential transmission _____________________________ 2.21 Setting up mail box for confidential receiving ____________ 2.23 Printing received confidential document ________________ 2.24 Polling ________________________________________________ 2.25 What is polling? ______________________________________ 2.25 Being polled by a remote machine (TX poll) ______________ 2.
Chapter 2 Operation (Continued) Other functions _________________________________________ 2.38 Using function buttons _________________________________ 2.38 Redial _______________________________________________ 2.38 Flash ________________________________________________ 2.39 Status _______________________________________________ 2.39 Printing reports ________________________________________ 2.40 User options ___________________________________________ 2.
Appendix FCC regulations ––––––––––––––––––––––––––––––––––––––––– 4.2 Canadian radio interference regulations –––––––––––––––––––– 4.2 EC declaration of conformity ––––––––––––––––––––––––––––– 4.3 Laser safety statement ––––––––––––––––––––––––––––––––––– 4.4 Safety information ––––––––––––––––––––––––––––––––––––––– 4.5 Power saver –––––––––––––––––––––––––––––––––––––––––––– 4.6 Specifications ––––––––––––––––––––––––––––––––––––––––––– 4.7 Index –––––––––––––––––––––––––––––––––––––––––––––––––– 4.
Important Precautions and Safety Information When using this fax machine, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons: 1. Read and understand all instructions. 2. Use common sense whenever operating electrical appliances. 3. Follow all warnings and instructions marked on the product and in the literature accompanying the product. 4. If an operating instruction appears to conflict with safety information, heed the safety information.
1 Getting Started 1.
Setting up your machine Unpacking Machine AC power cord *1 Toner cartridge Telephone/modem line cord *1 Printer exit tray 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 One-touch label Document tray Laser facsimile user’s guide *1 The shape of AC power and telephone line cord plugs may differ, depends on your country. 1.
1 Control locations and functions Getting Started Take a moment to familiarize yourself with the main components and understand their functions. Caution : Use of controls or adjustments other than those specified herein may result in radiation exposure. Front view Document tray Document guide Printer exit tray Control panel Document exit tray Cassette Manual feed tray Paper level indicator Note: Your machine may look slightly different from the illustration. Setting up your machine 1.
Rear view LINE Telephone line jack TEL Extension telephone jack Power cord connector Inside Cover Toner cartridge 1.
1 Choosing a location Do not place your machine: - In direct sunlight. - Near heat sources or air conditioners. - In dusty or dirty environments. Setting up your machine Installing the toner cartridge 1. Open the cover by pressing the cover release button. 2. Raise the cover. Setting up your machine 1.5 Getting Started To help guarantee trouble-free operation of your machine, place it on a flat, stable surface near your workstation.
3. Unpack the toner cartridge. Grip the cartridge firmly and pull the sealing tape slowly from the cartridge. You may feel some initial resistance. Green cap As the tape will have a small amount of toner on both sides, take care not to get toner on your clothes. Remove the green cap from the right side of the cartridge. 4. Gently shake the cartridge from side to side 5 or 6 times to distribute the toner evenly inside the cartridge. 5. Find the cartridge slots inside the machine, one on each side. 1.
1 6. Grasp the handle and slide the cartridge down between the cartridge slots, until it drops into place. Getting Started 7. Close the cover. Make sure that the cover is securely closed. Notes: • Do not expose the cartridge to direct sunlight or strong room light. • To avoid damaging the photo-sensitive drum, never open the drum shutter. • To avoid damaging the cartridge, complete cartridge installation as quickly as possible.
Loading paper into the cassette You can load approximately 250 sheets of paper in the paper cassette. The window on the front of the paper cassette shows the amount of paper currently left in the cassette. When the cassette becomes empty, the window turns into red. Paper full Paper Empty To load a stack of paper 1. Remove the paper cassette by pulling it toward you. 2. Fan the paper and load the paper in the cassette under the guides with the print side face down.
3. Make sure that the stack goes under the metal retaining clip A . Paper overloading may cause paper jams. Make sure that paper is A under this metal clip. 4. Make sure that the stack of paper does not exceed the line indicated by mark on the left inside wall of the cassette. Setting up your machine 1.9 Getting Started D EA RH E TT LE 1 If you are using a preprinted stock, such as letterhead, place the printed side face down with the top edge of the page toward the front of the cassette.
5. Pinch the side guide as shown below to adjust it to proper paper width. The paper cassette is preset to load letter size paper. If you want to load A4 or legal size paper, adjust the cassette for the paper you want to load. For details on how to adjust the paper cassette, see ‘How to adjust paper guides’ on page 1.11. 6. Insert the cassette back into the printer. 1.
1 How to adjust paper guides There are two main guides and one auxiliary guide as shown below to adjust for the paper length. One of main guide is for legal, A4, or folio size, and the other is for letter (LTR), executive (EXEC), or B5 size paper. When you load letter size paper, it is recommended that you use the auxiliary guide on the upper right corner of the cassette with the appropriate main guide.
When you load letter, executive, or B5 size paper, it is recommended that you use the auxiliary guide with the main guide before loading paper. To adjust the auxiliary guide, remove the guide 1 , then insert it to the appropriate position 2 . B5 B5 O IS JI S EX LT EO R 1 EO B5 B5 JI IS O S EX LT R 2 Width guide Squeeze the guide as shown and slide the guide to the left until it lightly rests against the edge of the paper stack.
1 Manually feeding paper Manual feed slot 1. Pull out the paper cassette, raise and then lower the manual feed tray toward you. Manual feed tray 2. Load the desired print material in the manual feed slot with the left edge to the far left of the slot. You must feed one sheet at a time. Setting up your machine 1.13 Getting Started When you copy on heavier weight papers, transparencies, you must manually feed them one sheet at a time through the manual feed slot.
Guidelines for the paper When selecting or loading paper, or other special media, keep these guidelines in mind: • Attempting to print on damp, curled, wrinkled, or torn paper can cause paper jams and poor print quality. • Use cut-sheet paper only. You cannot use multiparty paper. • Use only high quality, copier grade paper. Avoid paper with embossed lettering, perforations, or textures that are too smooth or too rough. • Colored paper should be of the same high quality as white photocopy paper.
1 Telephone line LINE TEL To a standard phone wall jack Extension phone If you want to use a regular phone or answering machine with your machine, connect the phone into the TEL jack. Plug the cord of your regular phone or answering machine into the socket marked TEL on the back of the machine. LINE TEL To a regular phone or answering machine Setting up your machine 1.15 Getting Started Plug one end of the telephone line cord into the LINE jack and the other end into a standard phone wall jack.
AC power cord Plug one end of the cord into the back of the machine and the other end into a standard AC power outlet (use 120 Volt only). The machine turns on. If there is no cartridge installed, or no paper, the display shows ‘DOOR OPEN OR NO TONER CARTRIDGE’ or ‘[NO PAPER]’. To AC outlet If you want to turn it off, unplug the power cord. Document tray Holding the document tray with both hands, push the tab on one end of the tray into the hole as show.
1 Document exit tray Document exit tray Printer exit tray Holding the rounded end, insert the two tabs into the corresponding slots on the back of the machine. Place the printer exit tray up or down depending on the type of the paper. For transparencies such as OHP film, lay it down as show at up. When the printing is finished, replace the tray. Setting up your machine 1.17 Getting Started Fold out the document exit tray, if necessary.
System setup Ringer volume You can adjust the volume of the ringer to the desired loudness. 1. Press Menu, then press System Setup on the one-touch keypad. The display shows ‘RINGER VOLUME ?’. 2. Press Start/Enter, then use " or ❷ to choose the desired loudness of the ringer. The selected ringer sounds and the display shows the loudness level with > symbol. No > symbol turns the ringer off. The machine will work normally even if the ringer is turned off. RINGER VOLUME [>>>>>>>> ] 3.
4. Press ➛ or ❿ repeatedly until you find the desired mode: •STANDARD–use with most documents. •FINE–use for documents with fine detail, such as small print. •SUPER FINE–use for documents that have extremely fine detail. 5. Press Start/Enter when you find the mode. The display asks you to choose the home contrast mode. HOME CONTRAST [ NORMAL ] 6. Press ➛ or ❿ repeatedly until you find the desired mode: •NORMAL–use with documents of average or normal contrast.
Sound control You can choose an alarm tone to sound when an error occurs (ALARM SOUND) or any key is pressed (KEY SOUND). 1. Press Menu, then press System Setup on the one-touch keypad. The display shows ‘RINGER VOLUME ?’. 2. Press " or ❷ until you find ‘SOUND CONTROL ?’. 3. Press Start/Enter. The display prompts you to turn ON or OFF the alarm sound. 4. Press 1 to turn the sound ON, or 2 to turn it OFF. You can also use ➛ or ❿ button to choose ‘ON’ or ‘OFF’, then press Start/Enter to confirm. 5.
1 Select language 1. Press Menu, then press System Setup on the one-touch keypad. The display shows ‘RINGER VOLUME ?’. 2. Press " or ❷ until you find ‘SELECT LANGUAGE ?’, then press Start/Enter. 3. Press " or ❷ to choose the desired display language, then press Start/Enter. You can also press the number of the language in the display. 4. The display shows the next setup menu. To return to standby mode, press Stop. Econo mode setting To get the most from your toner supply, set the econo mode to on.
Adjusting speaker volume 1. Press OHD1)/V.Req. to adjust the speaker volume. If you cannot hear a dial tone, check the phone line connection. 2. Press " or ❷ repeatedly until you find the desired loudness. The display shows the current volume level. 3. After choosing the desired volume level, press OHD1)/V.Req.. Note : 1) OHD : On Hook Dial Setting the date and time The current date and time are shown in the display window when the machine is on and ready for use (standby mode).
1. Press Menu, then press System ID on the one-touch keypad. The display asks you to enter the telephone number. If there is a number previously registered, the number appears. 2. Enter the telephone number (up to 20 digits) which your machine is connected to. You can include + and - symbol by pressing respectively. and # If you make a mistake, press ➛ or ❿ to move the cursor under the wrong digit, then enter the correct number to change or press Search/Delete to delete the number. 3.
2 Operation 2.
Using the control panel LCD display The display shows the current status of your machine and guides you through various tasks using a menu system for each operation.
Search/Delete Use to search for numbers in memory. Or use to delete digits in the edit mode. Rcv.Mode (Receiving mode) Use to choose the receive mode you want to use. See page 2.17. The selected mode is displayed. Search/Delete Resolution Speed/Status Redial/Pause Flash OHD/V.Req. Start/ Enter DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 Resolution Use to choose the resolution of transmitted documents. Operation ABC Contrast 2 Rcv.
Using the number keypad As you perform various tasks, you will need to enter names and numbers. For example, when you set up your machine you enter your name (or your company’s name) and telephone number. When you use the one-touch dial or speed dial, you also enter the telephone numbers and names. When the display asks you to enter a name, the LCD display reads: ID)_ You can then use the procedures described below to enter up to 20 letters and special characters, numerals, or spaces.
2. When the letter you want appears in the display, press the number key labeled with the next letter you want. If the next letter is found on the same number button, move the cursor by pressing ❿, then press the desired button. The blinking cursor moves right and the next letter appears in the display.
Entering numbers You can enter the number of the remote fax machine manually by using the number keypad. The number you pressed appears in the display. TEL)95551212_ When the display asks you to enter a number, you can also use a one-touch dial button (including group dial) and speed dial number. Editing numbers or names If you make a mistake while entering a number or name, move the cursor under the wrong digit by using ➛ or ❿.
Sending a fax Preparing documents for faxing or copying 2 Operation You can use the machine to fax, or copy documents that are printed on standard letter, legal, or A4 size paper. Follow these guidelines to prepare your documents. • Do not attempt to feed the following types of documents into the machine. Instead, make copies and insert the copies into the document tray.
Setting document resolution and contrast We recommend sending documents printed using a typewriter, felt tip pen, black ink, or laserprinter. The paper should be white or very light, and of normal weight not cardboard. Blue lines on a ruled pad do not fax well. When you send normal documents, you need not adjust the resolution and the contrast.
Loading document 1. Turn the page face down. 2. Adjust the document guides to match the width of the document. 3. Slide the sheet down into the document tray until it’s gripped by the machine. 2 Operation document guide The automatic document feeder sizes and pulls in the page. The display shows ‘DOCUMENT READY’ and the remaining memory capacity alternatively. You can insert up to 50 sheets (20 lb Paper) at a time. If you insert more than one sheet, make sure the bottom sheet enters first.
Sending a fax automatically 1. After loading a document, enter the number of the remote fax machine using the number keypad. You can store one-touch or speed dial numbers so that you can dial your most frequently used numbers with one touch of a button or speed dial number. For information on storing and using numbers in memory, see page 2.31.
Automatic redial When you send a fax, if the number you have dialed is busy or there is no answer, the machine hangs up, waits for the specified retry term and redials the number. If after the specified number of retry attempts (retry count), the machine fails to connect, the machine returns to Standby mode. While the machine is redialing, the display shows ‘RETRY REDIAL ?’. If you want to redial the number immediately, press Start/Enter. To stop redialing, press Stop.
Delayed transmission You can configure your machine to send a fax at a specified time. Up to 50 delayed transmission operations can be reserved in your machine. 1. Place the document face down in the automatic document feeder. If desired, adjust the resolution and contrast. For details, see page 2.8. 2. Press Menu, then press Delay TX on the one-touch keypad. 3. Enter the telephone number of the remote machine.
7. Press Start/Enter. The display shows the current time on the upper line and prompts you to enter the time the fax will be sent. CURRENT 12:30AM START 12:30AM 8. Using the number keypad, enter the time the fax will be sent. Use the " or ❷ button to switch between AM and PM. If you set a time earlier than the current time, the document will be sent at that time on the following day. 9. After entering the time, press Start/Enter. Sending a fax 2.
Memory transmission (Broadcasting) With memory transmission, documents are stored in memory and automatically sent to one or more remote stations. Use this feature to send your documents to multiple locations. You can store a maximum of 25 fax numbers for a memory transmission. If you need to send your fax to more then 25 locations, you can increase the number of fax locations dialed by including a group dial number as one of the 25 numbers.
Priority transmission When priority transmission is enabled, a high priority document can be transmitted ahead of previously scheduled operations. In this operation, the document is scanned into memory. It is immediately transmitted at the conclusion of any operation already in progress. A priority transmission interrupts a broadcast operation between stations (for example, when transmission to station A ends but before transmission to station B begins), or between redial attempts. 1.
Adding documents to a standby operation You can add documents to the delayed transmission previously reserved in your machine’s memory. 1. Load the document face down. If necessary, adjust resolution and contrast. For details, see page 2.8. 2. Press Menu, then press Add/Cancel on the one-touch keypad. The display asks you to select ‘ADD’ or ‘CANCEL’. OPERATION 1.ADD 2.CANCEL 3. Press Start/Enter to confirm ‘ADD’. The display shows operation currently reserved in memory.
Receiving a fax 2 Your multi-function machine has four receiving modes: • FAX The machine answers an incoming call and immediately goes into receiving mode. • TEL/FAX The machine answers the incoming call. If a fax signal is not detected, the machine sounds a ringing tone to indicate a voice phone call. If the external phone is not lifted while the ringing tone is sounding, the machine will switch to automatic fax receiving mode.
Receiving automatically in FAX mode 1. Press and hold Rcv.Mode for about 2 seconds until the display changes. please repeatit until the display shows ‘FAX’ in the display window. 2. When a fax call comes in, the machine answers on the preset ring and receives it automatically. Note : To change the number of rings before the machine answers an incoming call, see page 2.44.
Receiving automatically in ANS/FAX mode To use this mode, you must attach an answering machine to the TEL jack on the back of your machine. 1. Press and hold Rcv.Mode for about 2 seconds until the display changes. please repeat it until the display shows ‘ANS/FAX’ in the display window. 2. Any incoming voice calls will be answered by the answering machine. The caller can then leave a message on the answering machine.
Receiving a fax when the machine is out of paper Incoming fax transmissions are automatically stored in memory under the following conditions: • Out of paper • A paper jam occurs • A document is copying • A list is printing After receiving documents, the machine display ‘MEMORY RECEIVED’ and the cause. For example, ‘NO PAPER’. When the condition is cleared, for example by loading new paper or clearing a jam, the machine will automatically print the fax stored in memory.
Mail box Confidential transmission You can set your machine up to keep documents confidential when communicating with other fax machines that have confidential mail box capability. Notes: • Make sure that the other party’s fax machine sured be are samsung fax machine confidential mail box feature. • Find out the confidential mail box number of the other party. 3. Press Start/enter to confirm ‘1.CONF. TX’ The display asks you to enter a 2-digit mail box number.
9. Press Start/Enter. The LCD displays the current time on the upper line and asks you to enter the time when the fax is to be sent. CURRENT 02:30PM START 02:30PM 10. If you want to send it at a later time, enter the time you want your machine to send the document. If you want to send the document immediately, skip over this step. Enter the time in same format (12/24 hour) as current time. If you set a time earlier than the current time, the document will be sent at that time on the following day.
Setting up mail box for confidential receiving Before receiving confidential documents, you have to set up the following: • Confidential mail boxes. You can have up to 10 confidential mail boxes. • The password for each mail box • The names for each mail box. If you do not want to assign the name, you can skip this setup. The following procedure shows how to register this information. 1. Press Menu, then press Mail box on the one-touch keypad.
Printing received confidential document When you receive a confidential document, the fax machine displays ‘MAIL’, total number of mail box which has the confidential document received, and the mail box name in the lower line of the display. 1. Press Menu, then press Mail box on the one-touch keypad. The display prompts that you can choose the three mail box options; 1.CONF. TX and 2.SET, 3.PRINT. 2. Press 3 to print the received mail.
Polling What is polling? Polling means that one fax machine requests another to send a document. This is useful for sending unattended faxes. The person who wants to receive the document calls the machine holding the original and requests that the document be sent. In other words, it “polls” the machine holding the original document. Note: The remote machine must also support polling to use this feature.
6. The display prompts you to store the document in the machine bulletin board memory. BULLENTIN ? Note: If you store the document in the bulletin board memory, more than one remote station can poll that document from your machine. If not, the file will be automatically erased after being polled by a remote machine. 7. To store the document in the bulletin board memory, press Start/Enter. Or If you do not want the document to be stored in bulletin board memory, press Stop. 8.
Canceling a job already in memory which is waiting to be polled If you want to cancel a job already in memory waiting to be polled, follow the procedure below. 1. Press Menu, then press Add/Cancel on the one-touch keypad. The LCD display prompts you to select 1.ADD or 2.CANCEL. 4. To cancel the polling job, press 1.YES. The job is erased from memory and the machine returns to standby mode.
4. Press Start/Enter. 5. The display asks you to enter another fax number to receive documents from another location. If you want to receive documents from more than one location: a) Press Start/Enter and enter another fax number using the numeric keypad, a one-touch button, or speed dial number The number appears in the display. Repeat steps 4 and 5 to receive document from other locations. Or b) If you have entered the last fax number, press Stop. 6. The display asks you to enter a name for the job.
Making a copy 2 The resolution is automatically set to SUPER FINE while the copy feature is in use, however, the contrast can be changed to produce the best copy quality for particular documents containing faint markings, dark image, photographs or other halftone images. When you make a copy, your machine provides several option features you can choose as follows: -Multiple copies : 1 to 99 copies of the document can be made.
To set copy options: 1. Load a document with the print side facing down. If necessary, adjust Contrast button to change the contrast. For details on the contrast, see page 2.8. 2. Press Copy. The display asks you to enter the number of copies (1 to 99). COPY [01-99] <01> 3. If you need two or more copies, enter the desired number using the dial keypad, then press ❷. You can also press ❷ without setting the number of copies. The display shows the next option; copy rate menu.
Automatic dialing 2 One-touch dialing lets you use any one of the 20 one-touch buttons located on the left of the machine’s control panel to automatically dial a number. Storing a number for one-touch dialing 1. Press and hold the one-touch button (01 through 20) for 2 seconds that you want to assign. The display shows `Txx)’, where `xx’ represents the selected one-touch button. 2. Enter the number (up to 46 digits) you want to store by using the number keypad, then press Start/Enter.
4. Press Start/Enter when the name appears correctly or without entering a name. 5. To set another one-touch number, press the desired one-touch button and repeat steps 2 through 5. Or To return to standby mode, press Stop. Using a one-touch number 1. Load a document you want to send a fax. 2. Press the one-touch button (01 through 20) to which you stored a number. The number will be automatically dialed, then the document begins to transmit when the remote fax machine answers the phone.
Speed dialing You can store up to 80 numbers in speed dial locations (1-80). Storing a number for speed dialing 1. Press and hold Speed/Status for 2 seconds. 2. Enter a speed dial location number to which you want to store a number, then press Start/Enter. 4. To assign a name to the number, enter the desired name. For information on how to enter names, see page 2.4. Or If you don’t want to assign a name, skip this step. 5. Press Start/Enter when the name appears correctly or without entering a name. 6.
Group dialing (for multi-address transmission) Numerous one-touch and speed dial numbers can be registered as a Group. By using the Group number, you can send a document to multiple parties in a single operation. Your machine will dial the remote numbers in stored sequence. If the number is busy, your machine will dial the next stored number and after dialing all of the stored numbers, will automatically redial any number(s) which was/were previously busy.
Editing the one-touch or speed dial numbers in a group dial After you have stored a group dial, you can edit a group dial at any time. 1. Press Menu, then press Group Dial on the one-touch keypad. The LCD display asks you to select ‘SET’ or ‘EDIT’ GROUP NO. 1.SET 2.EDIT 2. Press 2 to select ‘2. EDIT’. ENTER ONE-TOUCH / SPEED DIAL>_ 4. Press a one-touch button or enter a speed dial location number you want add or delete. 5. Then display will shows ‘ADD ?’ or ‘DELETE ?’.
Assigning a group to a one-touch button You can use a group number as one-touch dialing. Before you can use this feature, you must first register the group number (see ‘Storing a number for one-touch dialing’ on page 2.31), and then store the registered group number into an empty one-touch button. 1. Press and hold the one-touch button that you want to assign (01 through 20) for 2 seconds. 2. Press Speed/Status enter the group number, then press Start/Enter.
Searching for a number in memory There are two ways to search for a number in memory. You can either scan from A to Z sequentially, or you can search using the first letter of the name associated with the number. Searching sequentially through memory 1. Press Search/Delete, then press ❷ to move downward through the memory until you find the number you want. To move upward, press #.
Other functions Using function buttons Redial To redial the number last called Press Redial/Pause. If a document is loaded in the document tray, the machine automatically begins to send. To search through redial memory 1. Press and hold Redial/Pause for 2 seconds. The redial memory in your machine retains the last 10 numbers called. If you have dialed the same number multiple times, the machine does not count the duplicates. 2. Press ❷ or # to search through memory until you find the number you want. 3.
Flash Some special phone services require a switch-hook signal for proper operation. For example, if you have call waiting, you can put a call on hold and take a second call on the same line by pressing the switch-hook button. Pressing Flash performs the equivalent of a switch-hook operation. 1. When you are on the telephone and hear the call waiting signal, press Flash once. The first caller is on hold and you are speaking to the second caller. 2. Press Flash again to talk to the first caller again.
Printing reports Your fax machine can print reports containing useful information - schedule job, system data, etc. The following reports are available: Help list This list shows the machine’s basic functions and commands to use as a quick reference guide. Message confirmation report This report shows the fax number, the number of pages, elapsed time of the operation, the communication mode and the communication results. You can set up your machine to print the message confirmation report (see page 2.
Power failure report This report is printed automatically when data in memory was erased. This report shows data (if any) erased by the power failure. Note: The list you have set to print automatically will not print when there is no paper loaded or a paper jam has occurred. To print list 1. Press Menu. 2. Press the desired list button on the one-touch keypad. User Options Your fax machine has various user-selectable features. These options are preset at the factory, but you may select to change them.
Selectable options These instructions assume that you have followed the steps on page 2.41 under ‘Setting an option’ and that the machine is prompting you to change one of the options listed here. • PAPER SIZE—Select the paper size you will use for the recording paper. Press 1 for letter (LTR), 2 for A4 size, or 3 to use legal (LGL) size paper. • MESSAGE CONF.—A message confirmation report shows whether the transmission was successful or not, how many pages were sent, etc.
• ECM MODE (Error Correction Mode)—This mode compensates for poor line quality and ensures accurate, error-free transmission with any other ECM-equipped facsimile machine. If the line quality is poor, transmission time may be increased when ECM is enabled. Press 1 to turn the error correction mode on. Press 2 to turn the error correction mode off.
• DISCARD SIZE—When receiving or copying a document as long as or longer than the paper installed in your fax machine, you can set the fax machine to discard any excess image at the bottom of the page to fit into the recording paper size. If the received page is outside the margin you set, it will be printed on two sheets of paper at the actual size.
• DRPD (Distinctive Ring Pattern Detection) MODE— ’Distinctive ring’ is a telephone company service which enables a user to use a single telephone line to answer several different telephone numbers. The particular number someone uses to call you on is identified by different ringing patterns, which consist of various combinations of long and short ringing sounds.
• SEND FROM MEMORY —With this feature enables all transmission documents are automatically scanned into memory, and it will not be necessary to wait until documents in the ADF (Automatic Document Feeder) are sent out before you can send or store other fax jobs. Press 1 to turn this feature on. Press 2 to turn this feature off. • LOCAL ID—This feature allows the machine to automatically print the page number, and the date and time of the reception at the bottom of each page of a received document.
Maintenance If you are getting streaks or spots on your print, you may run the maintenance. Cleaning drum If print output quality decreases due to the presence of black streaks or ghost images appearing on printouts, drum cleaning should be performed as an attempt to rectify the problem. 1. Press Menu, then Maintenance on the one-touch keypad. 2 ‘CLEAN DURM ?’ appears in the display. CLEANING DRUM PLEASE WAIT..
Notify toner low If you have set this notify toner low menu option to ON, when the toner cartridge needs to be replaced, your machine automatically sends a fax to your service company or the dealer to notify them that your machine requires a new toner cartridge. This feature will be activated only when the phone number of the service company or the dealer is stored in your machine’s memory by technician. Ask your dealer for more information. 1. Press Menu, and Maintenance on the one-touch keypad. 2.
3 Troubleshooting 3.
Troubleshooting Clearing jams Document jams while sending a fax If a document jams while you are sending it, ‘DOCUMENT JAM’ appears in the display. Do not pull the document out of the slot, as this could harm your machine. 1. Open the control panel by hand. 2. Flip up the control panel latch in front of the left side arm to hold the control Panel open. 3. Carefully remove the jammed document. Then pull down the stopper and close the control panel firmly until it clicks into place. 3.
Paper jams while the machine is printing By carefully selecting paper type and loading paper properly, you should be able to avoid most paper jams. If a paper jam occurs, an error message appears in the display. Follow the steps below to clear the jam. To avoid tearing the paper, pull the jammed paper out gently and slowly. If jammed in the paper feed area (JAM 0) 1. Remove the recording paper cassette as shown below. 2. Carefully pull out the jammed paper. 3 Troubleshooting 3.
If jammed inside the machine (JAM 1) 1. Pull the cover release button toward you and open the cover. 2. Remove the toner cartridge. 3. Gently pull the paper toward you. 4. Check that there is no other paper in the machine. 5. Reinstall the toner cartridge and close the cover. 3.
If jammed in the printer output area (JAM 2) 1. If the paper jams as it exits to the printer exit tray and a long portion of the paper is visible, pull the paper straight out. Stop pulling on the paper if you feel resistance, and the paper does not move immediately when you pull. Continue with the next step. Tips for avoiding paper jams • Do not overload the machine with paper. Make sure that only 250 sheets (20 lb) of paper are loaded at a time. • Flex, fan and straighten the paper before loading it.
LCD error messages Display Meaning RETRY REDIAL? The machine is waiting for the programmed interval to automatically redial a previously busy station. You can press Start/Enter to immediately redial, or Stop to cancel the redial operation. COMM. ERROR A problem with facsimile communications has occurred. A problem with the facsimile communications has occurred Try again. Remote party did not have the requested feature, such as polling. Reconfirm your remote party’s feature.
Meaning NO. NOT ASSIGNED The one-touch or speed dial location you tried to use has no number assigned to it. Dial the number manually with the keypad, or assign the number. The recording paper has run out. Load the recording paper. OVERHEAT The printer part in your unit has overheated. Please wait until it cools down. If you cannot solve the problem, please call service. PAPER JAM 0 OPEN/CLOSE DOOR Recording paper has jammed in paper feeding area. Clear the jam.
Fixing problems Your problem may be listed on page 3.6 in the ‘LCD error messages’ section. Below are other problems you can solve by yourself. If not, call for service. Fax problems Symptom The machine is not working, there is no display and the buttons are not working. Cause and Solution • Unplug the power cord and plug it in again. • Check your power socket is live. • Check that the phone line is connected properly. No dial tone. The numbers stored in the memory do not dial correctly.
Symptom You cannot poll another machine. The fax you receive has got blank spaces or you received poor-quality copy. Cause and Solution • The fax machine you are polling may be using a poll code. • The machine sending you the fax may be faulty. • The fax machine sending you a fax may have a dirty scan glass. • A noisy phone line can cause line errors. • Check your machine by making a copy. • The cartridge toner may be empty. • You may run the adjust shading in maintenance.
Maintenance Clearing memory You can selectively clear information stored in your machine’s memory. 1. Press Menu, then press Memory Clear on the one-touch keypad. The display shows the options you can choose to clear. 1. SYSTEM ID : your system ID number and name are cleared from the machine’s memory. 2. SYSTEM DATA : restores user-selectable options to the default value. 3. PHONEBK&MEMORY : clears the one-touch, speed dial, or group dial numbers stored in memory.
Cleaning the document scanner To keep your machine working properly, occasionally clean the white roller, ADF (automatic document feeder) rubber, and the scanning glass. If they are dirty, documents sent to another fax machine will not be clear. 1. Open the control panel with hand. 2. Flip up the control panel latch in front of the left side arm to hold the control panel open. 3 B A busing 4. Wipe the roller surface with a soft cloth dampened with water. Maintenance 3.11 Troubleshooting 3.
5. Clean the ADF (automatic document feeder) rubber piece. 6. Carefully wipe the scanning glass with a soft, dry cloth. If the glass is very dirty, first wipe it with a slightly dampened cloth, then with a dry cloth. Be very careful not to scratch the glass surface. 7. Replace the roller in reverse order, and then pull down the control panel latch and close the control panel firmly until it clicks into place. 3.
Managing toner cartridge Expected cartridge life The life of your toner cartridge depends on the amount of toner used in each print job. For instance, when you print a typical business letter with about 5% page coverage, you can expect a toner cartridge life of approximately 6,000 pages. The actual number may vary according to the print density of the page you print. If you print a lot of graphics, you may need to change the cartridge more often.
To replace the toner cartridge: 1. Pull the cover release button toward you, open the machine cover. 2. Remove the old toner cartridge. Follow the instructions printed on the cartridge box to recycle the used cartridge. 3. Install new toner cartridge, see page 1.5. 3.
Appendix 4.
FCC regulations This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EC declaration of conformity We, SAMSUNG ELECTRONICS CO.,LTD #259, Gong Dan-Dong, Gumi-City, Kyung Buk, Korea declare sole responsibility that the SF-6800/SF-6750 Laser Facsimile Msys 6800/Msys 6750 Laser Facsimile meets the intent of Directive 89/336/EEC for Electromagnetic Compatibility and Low Voltage Directive 73/23/EEC.
Laser safety statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR subchapter J for class I(1) laser products, and elsewhere is certified as a class I laser product conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a class I level during normal operation, user maintenance, or prescribed service condition.
Laser product label. CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE APPAREIL À LASER DE CLASSE 1 TO IEC 825 Safety information Product safety USA UL 1950 (UL LISTING) CANADA CSA C22.2 No. 950 & UL 1950 (CSA Certification) EEC (Europe) IEC 60950/EN 60950 (TÜV GS Certification) CB IEC 60950 Laser safety EEC (Europe) HD 194. & EN 60825 USA 21 CFR, Chapter 1, Subchapter J (CDRH Certified) Appendix 4.
Power saver This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. For potentially faster printing of the first page, you may turn the power save off from the Remote Control Panel setting. The energy star emblem does not represent EPA endorsement of any product or service.
Specifications Applicable line Public Switched Telephone Network (PSTN) or behind PABX Compatibility CCITT Group 3 Data coding MH/MR/MMR Modem speed 14400/12000/9600/7200/4800/2400 bps Transmission speed Approx. 6 sec. Effective scanning width 8.2 inches (208 mm) Effective printing width 8.
Index A adding documents • 2.16 adjust speaker volume, setup • 1.22 automatic dialing • 2.31 automatic redial • 2.11 B broadcasting • 2.14 C call back message • 2.40 caller ID • 2.46 canceling a standby operation • 2.16 cartridge • 1.5 connection extension phone • 1.15 telephone line • 1.15 power cord • 1.16 contrast button, location • 2.3 setting • 1.18 2.8 control panel • 2.2 copy • 2.29 D date and time, setting • 1.22 delayed transmission • 2.12 discard size • 2.44 document jam, clearing • 3.
J jam, clearing document • 3.2 paper • 3.3 journal, print • 2.40 O one-touch dial sending • 2.32 storing • 2.31 opc drum, clean • 2.47 K key sound, setup • 1.20 P paper jam, clearing • 3.3 loading • 1.8 pause • 2.6 phonebook • 2.40 polling • 2.25 power cord, connection • 1.16 power failure report • 2.41 power save mode • 2.42 priority transmission • 2.15 L language, select • 1.21 list, print • 2.40 LCD, location • 2.2 loading paper •1.8 document • 2.9 M mail box • 2.21 maintenance adjust shading • 2.
S sending automatically • 2.10 broadcasting • 2.14 delay TX • 2.12 priority TX • 2.15 polling • 2.25 setup document exit tray • 1.17 document tray • 1.16 system • 1.18 shading, adjust • 2.47 speaker volume, adjusting • 1.22 speed dial sending • 2.33 storing • 2.33 system data list • 2.40 system setup answer on ring • 2.44 auto journal • 2.42 caller ID • 2.46 clock mode • 2.46 discard size • 2.44 DRPD • 2.45 ECM mode • 2.43 fax collate• 2.46 flash time• 2.46 local ID • 2.46 message confirm • 2.
ELECTRONICS Internet Home Page: http://www.samsungprinter.com P/N: JC68-00234A Rev.1.
