Camera Owner's Manual

5151
ENGLISH
舅可以重設 Miniket Photo 以載入預設（出廠）設定値0
11.. 將將模模式式轉轉盤盤轉轉到到 SSeettttiinnggss 模模式式00
22.. 按按下下 [[PPOOWWEERR]] 按按瞿瞿以以開開啓啓 MMiinniikkeett PPhhoottoo00
33.. 向向左左或或向向右右移移動動搖搖桿桿選選取取 <<RReesseett>>00
44.. 按按下下搖搖桿桿 ((OOKK)) 按按瞿瞿00 確確認認訊訊息息將將會會顯顯示示00 向向左左
或或向向右右移移動動搖搖桿桿選選取取一一個個選選項項，，然然後後按按下下搖搖桿桿
((OOKK)) 按按瞿瞿00
◆
<<YYeess>>
： 啓動重設功能0
◆
<<NNoo>>
： 取消重設功能0
[
警警告告
]
✤ 如果舅重設 Miniket Photo，舅設定的所有功能將會起始化爲預設
（出廠）設定値0
[
附附註註
]
✤ 使用者設定値和日期/時間資訊將會在舅重設時起始化0
✤ 重設 Miniket Photo 後，請設定日期/時間（請參閱第 42 頁）0
設設定定 MMiinniikkeett PPhhoottoo：： 設設定定系系統統
重重設設 MMiinniikkeett PPhhoottoo
You can reset the Miniket Photo to load default (factory) settings.
1. Turn the Mode Dial to the Settings mode.
2. Press the [POWER] button to turn on the Miniket
Photo.
3. Select <Reset> by moving the joystick left / right.
4. Press the joystick (OK). Select an option by
moving the joystick left / right and then press
the joystick (OK).
◆ <Yes>: Starts the reset function.
◆ <No>: Cancel the reset function.
[ Warning ]
✤
If you reset the Miniket Photo, all functions you set are initialized to
the default (factory) settings.
[ Notes ]
✤
User settings and date / time information are initialized when you
reset.
✤
After resetting the Miniket Photo, set date / time (refer to page 42).
Setting the Miniket Photo :
Setting the System
Resetting the Miniket Photo
4
!
Settings
Reset
Move Select
MoveMove SelectSelect
Reset?
Yes No
OK
3
TYPE
SettingsSettings
ResetReset
Start
MoveMove SelectSelect
Move Select
OK