Datasheet

- 25 -
MMCRE64G5MXP-0VB datasheet SSD
Rev. 1.3
MMCRE28G5MXP-0VB
MMDOE56G5MXP-0VB
7.3.2.5 Self-test execution status
Bit Definition
0-3 Percent Self-test remaining. An approximation of the percent of the self-test routine remaining until completion given in ten
percent increments. Valid values are 0 through 9.
4-7 Current Self-test execution status.
0 The self-test routine completed without error or has never been run.
1 The self-test routine was aborted by the host.
2 The self-test routine was interrupted by the host with a hard or soft reset.
3 The device was unable to complete the self-test routine due to a fatal error or unknown test error.
4 The self-test routine was completed with an unknown element failure.
5 The self-test routine was completed with an electrical element failure.
6 The self-test routine was completed with a servo element failure.
7 The self-test routine was completed with a read element failure.
15 The self-test routine is in progress.
7.3.2.6 Total time in seconds to complete off-line data collection activity
This field tells the host how many seconds the device requires to complete the off-line data collection activity.
7.3.2.7 Current segment pointer
This byte is a counter indicating the next segment to execute as an off-line data collection activity. Because the number of segments is 1, 01h is always
returned in this field.
7.3.2.8 Off-line data collection capability
Bit Definition
0 Execute Off-line Immediate implemented bit
0 S.M.A.R.T. Execute Off-line Immediate subcommand is not implemented
1 S.M.A.R.T. Execute Off-line Immediate subcommand is implemented
1 Enable/disable Automatic Off-line implemented bit
0 S.M.A.R.T. Enable/disable Automatic Off-line subcommand is not implemented
1 S.M.A.R.T. Enable/disable Automatic Off-line subcommand is implemented
2 Abort/restart off-line by host bit
0 The device will suspend off-line data collection activity after an interrupting command and resume it after a vendor
specific event
1 The device will abort off-line data collection activity upon receipt of a new command Bit Definition
3 Off-line Read Scanning implemented bit
0 The device does not support Off-line Read Scanning
1 The device supports Off-line Read Scanning
4 Self-test implemented bit
0 Self-test routing is not implemented
1 Self-test routine is implemented
5 Reserved (0)
6 Selective self-test routine is not implemented
0 Selective self-test routine is not implemented
1 Selective self-test routine is implemented
7 Reserved (0)
7.3.2.9 S.M.A.R.T. Capability
This word of bit flags describes the S.M.A.R.T. capabilities of the device. The device will return 03h indicating that the device will save its Attribute Values
prior to going into a power saving mode and supports the S.M.A.R.T. ENABLE/DISABLE ATTRIBUTE AUTOSAVE command.
Bit Definition
0 Pre-power mode attribute saving capability. If bit = 1, the device will save its Attribute Values prior to going into a power
saving mode (Standby or Sleep mode).
1 Attribute auto save capability. If bit = 1, the device supports the S.M.A.R.T. ENABLE/ DISABLE ATTRIBUTE AUTOSAVE
command.
2-15 Reserved (0)