MICRO COMPONENT AUDIO SYSTEM MP3-CD/CD-R/RW PLAYBACK MM-ZB7 Instruction Manual
Safety Warnings GB CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTER LOCKS DEFEATED, AVOID EXPOSURE TO BEAM. CAUTION RISK OF ELECTRIC SHOCK.
Thank you for buying this SAMSUNG micro component system. Contents Please take time to read these instructions. They will allow you to operate your system with ease and take full advantage of its features. SAFETY WARNINGS .................................................................................................................................................................................. 2 INSTALLING YOUR MICRO COMPONENT SYSTEM Front Panel View ..................................................
Front Panel View GB 1 6 2 TUNER CD 3 Open/Close Down 4 AUX Tuning Mode Up Demo TAPE Phones 7 8 Band Standby/On Volume Rec/Pause REV.Mode Sound Mode 9 10 5 11 Push Eject 4 12 1. Skip or Search 7. CD Door open/close 2. Function (TUNER/CD/TAPE/AUX) 8. Demo 3. Standby/On 9. Sound Mode 4. Headphone Jack Connector 10. Volume 5. REC/Pause 11. REV.Mode 6. Stop 12.
Remote Control GB Timer/ Clock Timer On/Off 25 24 1 Sleep EQ/P.Sound Aux 23 2 4 5 CD SYNC. REV. Mode Display RDS PTY 19 18 CD 6 7 8 9 22 21 20 TAPE 3 17 +10 Repeat Program/ Set 10 VOL. 16 15 Band Tune/CD Mode 14 11 VOL. 13 12 Mono/ST Mute 1. Standby/On 13. Mute 2. EQ/P.Sound 14. Volume Control 3. TAPE Rewind 15. Band 4. TAPE Fast-Forward 16. CD Play 5. CD SYNCHRO 17. CD Track Add +10 6. REV. Mode 18. RDS/Display 7. Repeat 19. RDS/PTY 8.
Rear Panel View GB 1 2 3 DIGITAL OUT (OPTICAL) 4 5 1. AM Aerial Connector Terminal 2. FM Aerial Connector Terminal 3. AUX-Input 4. CD Digital Out Jack 5.
Where to Install Your Micro Component System Inserting Remote Control Batteries GB To take full advantage of your new micro component system, follow these installation instructions before connecting the unit. Install the system on a flat, stable surface. Never place this unit on carpeting. Never place this unit in an outdoor area. Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.
Connecting to an External Source Speaker Connection GB The auxiliary input can be used to take advantage of the sound quality of your micro component system when listening to other sources. Examples: A television A video disc player A Hi-Fi stereo video cassette recorder To connect the external source, the source must have an audio output. In addition, you need an RCA connection cable. 1 Set the system to standby mode and disconnect it and the external source from the main.
Connecting the AM (MW)/LW Aerial GB The AM aerial (for long and medium waves) can be: Placed on a stable surface Fixed to the wall (you must first remove the base) The AM aerial connector terminals are located on the rear of the system and are marked AM . To avoid noise interference, check that the loudspeaker wires do not run close to the aerial wires. Always keep them at least 2 inches (5 cm) away. DIGITAL OUT (OPTICAL) Connecting the FM Aerial How to connect a COAXIAL TYPE aerial.
Viewing the Various Functions on Your System Setting the Clock GB You can view the various functions available on your system. 1 Press the Demo button. Result: The various functions available are listed in turn on the display. Your system is equipped with a clock which allows you to turn your system on and off automatically.
To replay the CD/MP3-CD Selecting a Track GB This unit has been designed to playback the CDs: Audio CD, CD Text, CD-R, CD-RW and MP3-CD. You can select the track you wish to listen to, either when the compact disc player is stopped or when a disc is playing. Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit. To start playback at the beginning of the... 1 2 Select the CD function by pressing CD( ) button. Press...
Function to skip through 10 tracks at a time GB What is MP3? MP3 means MPEG1 Layer 3, the global standard for audio signal compression technology. It uses digital compression technology to compress original sound data by up to 12 times without sound quality degradation. File Compatibility The unit will playback files created in MP3 format (Mpeg1.Layer3) with *.mp3 as their extension. Files created in MP2 format (Mpeg1.Layer2) with *.mp2 as their extension can also be played back.
Programming the Order of Playback (This function is not only available during playback of an MP3-CD.) Checking or Changing Programmed Tracks GB You can decide: You can check or change your selection of tracks at any time. The order of the track desired to listen The track not desired to listen A maximum of up to 24 order of tracks desired to listen may be programmed. Before selecting the track, the CD player should be stopped. This function may be used simultaneously with the CD Repeat function.
Searching for and Storing the Radio Stations GB Selecting a Stored Station You can store up to: You can listen to a stored radio station as follows: 15 FM stations 8 MW stations 7 LW stations 1 2 3 Switch the system on by pressing Standy/On ( ). Select the required frequency band by pressing TUNER (Band) again on the front panel or Band on the remote control. Result: The appropriate indication is displayed: FM Frequency Modulation AM(MW) Medium Wave LW Long Wave To search for a station...
About RDS broadcasting This unit has the RDS (Radio Data System) function, which enables for the various information such as broadcasting station, radio text, time and 30 types of programs (News, Rock, Classic, etc.) to be received from the FM RDS station together with normal radio signal. 1 2 Press the Standby /On ( 3 Press the RDS Display button to select the desired RDS mode. Whenever the button is pressed, RDS mode changes as follows. ) button. Receive the FM radio.
PTY(Program Type) indication and PTY-SEARCH function GB ◆ The PTY information is composed of an identification symbol, which helps the FM radio to recognize the program type of each FM station. About PTY-SEARCH Searches the same PTY as the program type of broadcasting station. ◆ The below 30 PTY information is shown on the display by pressing the Pty button.
Selecting the Cassette Playback Mode Listening to a Cassette Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 23. 1 2 3 4 5 Switch the system on by pressing Standby/On ( ). Open the cassette deck by pushing on the corner of the cover marked Push Eject ( ) until you hear a click and then releasing it. When the display indicates... The micro component system plays back...
Recording a Compact Disc GB Direct recording You can record a compact disc on a cassette in two different ways: Synchronised recording Direct recording The direct recording mode enables you to start recording with any track on the compact disc. You do not need to adjust the volume, as it has no effect on the recording. Synchronised recording 1 2 3 4 This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.
Timer Function GB The timer enables you to switch the system on or off at specific times. Example: You wish to wake up to music every morning. 9 Press Stanby/On ( ) to set the system to standby mode. is displayed to the bottom left of the time, indicating that Result: the timer has been set. The system will switch on and off automatically at the required times. If you no longer want the system to be switched on or off automatically, you must cancel the timer.
Canceling the Timer Mute Function GB After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it. You can stop the timer at any time (system on or in standby mode). To... Press Timer On/Off... Cancel the timer Once. Result: is no longer displayed. Restart the timer Twice. Result: is displayed again. You can turn the sound off temporarily on your system.
Setting the System to Switch off Automatically Connecting Headphones GB While listening to a compact disc or a cassette, you can set the system to switch off automatically Example: You wish to go to sleep to music. 1 Press Sleep.
Cleaning Your Micro Component System Safety Precautions GB The following diagrams illustrate the precautions to be taken when using or moving your micro component system.
Precautions When Using Compact Discs Before Contacting the After-Sales Service GB Handle your compact discs with care. Always hold them by the edges to avoid leaving fingerprints on the shiny surface. When you have finished playing a compact disc, always put it back in its case. Do not fix paper or adhesive tape to the discs and do not write on the label. Clean them with a special-purpose cloth.
Technical Specifications SAMSUNG strives to improve its products at all times. Both the design specifications and these user instructions are thus subject to change without notice. RADIO LW Usable sensitivity 60 dB AM (MW) Signal/noise ratio 40 dB Usable sensitivity 54 dB Total harmonic distortion 2% FM Signal/noise ratio 62 dB Usable sensitivity 3 dB Total harmonic distortion 0.
THIS APPLIANCE IS MANUFACTURED BY: ELECTRONICS AH68-01100B