VIDEO-CD MICRO COMPONENT AUDIO SYSTEM VCD/MP3-CD/CD-R/RW PLAYBACK MM-VB7 Instruction Manual
Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTER LOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
Thank you for buying this SAMSUNG micro component system. Contents Please take time to read these instructions. They will allow you to operate your system with ease and take full advantage of its features. SAFETY WARNINGS .................................................................................................................................................................................. 2 INSTALLING YOUR MICRO COMPONENT SYSTEM Front Panel View ...................................................
Front Panel View GB 1 6 2 TUNER 3 Open/Close Band Standby/On VCD/CD Previous Down 4 AUX Next Up Demo TAPE Phones Tuning Mode Volume REC/Pause REV.Mode Sound Mode Mic 5 7 8 9 10 11 12 Push Eject 4 13 1. Skip or Search 8. 2. Function (TUNER,VCD/CD,TAPE,AUX) Demo 9. Mic jack 3. Standby/On 10. Sound Mode 4. Headphone Jack Connector 11. Volume 5. REC/Pause 12. REV.Mode 6. Stop 13. Push Eject (Cassette Door Open/Close) 7.
Remote Control GB 1 32 2 31 30 3 4 29 28 5 6 27 26 7 25 8 24 9 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 10 23 11 12 13 14 15 22 21 16 18 17 Standby/On Digit Buttons/Direction Buttons FM Mono/Stereo,VCD Zoom +10/0 Track Previous VCD/CD Stop CD Repeat Radio Station Search Tuning Mode AUX TAPE Rewind TAPE Fast-Forward Sleep CD Synchro VCD Sound VCD Slow Play 20 19 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32.
Rear Panel View GB 1. SW Aerial (option) 2. AM Aerial Connector Terminal 3. FM Aerial Connector Terminal 4. Video Output 5. Audio Output 6. AUX-Input 7. Loudspeakers Connector Terminals 8.
Where to Install Your Micro Component System Inserting Remote Control Batteries GB To take full advantage of your new micro component system, follow these installation instructions before connecting the unit. Install the system on a flat, stable surface. Never place this unit on carpeting. Never place this unit in an outdoor area. Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.
Connecting to an External Source Speaker Connection GB The auxiliary input can be used to take advantage of the sound quality of your micro component system when listening to other sources. Examples: A television A video disc player A Hi-Fi stereo video cassette recorder To connect the external source, the source must have an audio output. In addition, you need an RCA connection cable. 1 Set the system to standby mode and disconnect it and the external source from the main.
Connecting the AM (MW)/LW Aerial Connecting the SW Aerial (option) GB The AM aerial (for long and medium waves) can be: Placed on a stable surface Fixed to the wall (you must first remove the base) The AM aerial connector terminals are located on the rear of the system and are marked AM . How to connect a WIRE TYPE aerial. Spread the SW aerial out and attach the ends to a wall, in the position providing the best reception. If reception is poor (e.g.
Viewing the Various Functions on Your System Setting the Clock GB You can view the various functions available on your system. 1 Press the Demo button in standby mode. Result: The various functions available are listed in turn on the display. Your system is equipped with a clock which allows you to turn your system on and off automatically.
MP3-CD Playback To replay the CD/MP3-CD GB This unit has been designed to playback the CDs: Audio CD, CD Text, CD-R, CD-RW, MP3-CD and VCD. How to play back MP3-CD directly Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit. 1 After inserting MP3-CD in the Set, Press the VCD/CD( Digit buttons after Reading. 2 You can see the information of Disc on the TV.
Searching for a Specific Music Passage on a CD Selecting a Track GB You can select the track you wish to listen to, either when the compact disc player is stopped or when a disc is playing. To start playback at the beginning of the... Press... Next track once Current track once Previous track twice Track of your choice or the appropriate number of times. What is MP3? MP3 means MPEG1 Layer 3, the global standard for audio signal compression technology.
Function to skip through 10 tracks at a time Shuffle Play Function GB Press the +10/0 button briefly while playing back a CD or VCD. The track 10 tracks after the current one will then be played back. You can listen to the tracks on a compact disc in a different order each time, as the various tracks will be selected automatically in a random sequence.
Programming the Order of Playback Checking or Changing Programmed Tracks GB You can decide: You can check or change your selection of tracks at any time. The order of the track desired to listen The track not desired to listen A maximum of up to 30 order of tracks desired to listen may be programmed. Before selecting the track, the CD player should be stopped. This function may be used simultaneously with the CD Repeat function.
Video CD Player Playback Search Functions GB In order to play back video CD, make sure that your unit is connected to your TV set. This unit is designed for playback of video CD, version 1.1 and 2.0. Only with version 2.0, it is possible to call up the on screen menu function. This unit will not play back any other video CD other than 1.1 and 2.0 versions. 1 2 3 4 5 You can find a certain passage faster during playback. This function is possible in CD or VCD Ver 1.1 or Ver 2.0 menu off mode. 1 To...
When adjusting play speed Sound Select Function GB Turn on the TV and set video mode. Press the Slow button on the remote control when the play function is on. Voices do not come out when the Slow button is pressed. Slow playing is 1/2, 1/4, 1/8 of the normal playing speed. With this function, you can play back video CD that provide 2-channel tone(bilingual) in the original language.
VCD View function ZOOM Function This function can be used conveniently to search a desired track in a VCD. This function is possible in VCD Ver 1.1 and Ver 2.0 menu off mode. GB 1 Press Zoom button during VCD playback. Result: The picture being reproduced will be enlarged twice as large as the previous one. 2 Press Zoom button once more in the state of double sized zoom. Result: The picture being reproduced is enlarged four times as large as the initial one.
Searching for and Storing the Radio Stations Selecting a Stored Station GB You can store up to: You can listen to a stored radio station as follows: 15 FM stations 15 AM(MW) stations 1 2 3 Switch the system on by pressing Standby/On ( ). Select the required frequency band by pressing TUNER (Band) again on the front panel. Result: The appropriate indication is displayed: FM Frequency Modulation AM(MW) Medium Wave 1 2 3 Switch the system on by pressing Standby/On ( ).
Selecting the Cassette Playback Mode Listening to a Cassette GB Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 25. 1 2 3 4 5 Switch the system on by pressing Standby/On ( ). Open the cassette deck by pushing on the corner of the cover marked Push Eject ( ) until you hear a click and then releasing it. When the display indicates... The micro component system plays back...
Recording a Compact Disc GB Direct recording You can record a compact disc on a cassette in two different ways: Synchronised recording Direct recording The direct recording mode enables you to start recording with any track on the compact disc. Synchronised recording You do not need to adjust the volume, as it has no effect on the recording. This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.
Timer Function GB The timer enables you to switch the system on or off at specific times. Example: You wish to wake up to music every morning. 9 Press Standby/On ( ) to set the system to standby mode. is displayed to the upside left of the time, indicating that Result: the timer has been set. The system will switch on and off automatically at the required times. If you no longer want the system to be switched on or off automatically, you must cancel the timer.
Canceling the Timer Mute Function GB After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it. You can stop the timer at any time (system on or in standby mode). To... Press Timer On/Off... Cancel the timer Once. Result: is no longer displayed. Restart the timer Twice. Result: is displayed again. You can turn the sound off temporarily on your system.
Setting the System to Switch off Automatically Microphone (not supplied) Function GB While listening to a compact disc or a cassette, you can set the system to switch off automatically Example: You wish to go to sleep to music. The microphone enables the user to mix in his or her vocals to sing-along with the music. Preparation Plug the microphone with a 3.5mm mic jack into microphone terminal. 1 Press Sleep on the remote control.
Cleaning Your Micro Component System Safety Precautions GB The following diagrams illustrate the precautions to be taken when using or moving your micro component system.
Precautions When Using Compact Discs Before Contacting the After-Sales Service GB Handle your compact discs with care. Always hold them by the edges to avoid leaving fingerprints on the shiny surface. When you have finished playing a compact disc, always put it back in its case. Do not fix paper or adhesive tape to the discs and do not write on the label. Clean them with a special-purpose cloth.
Technical Specifications GB SAMSUNG strives to improve its products at all times. Both the design specifications and these user instructions are thus subject to change without notice. RADIO LW(option) Usable sensitivity 60 dB SW(option) Usable sensitivity 40 dB AM (MW) Signal/noise ratio 40 dB Usable sensitivity 54 dB Total harmonic distortion 2% FM Signal/noise ratio 62 dB Usable sensitivity 3 dB Total harmonic distortion 0.
THIS APPLIANCE IS MANUFACTURED BY: ELECTRONICS AH68-01157B