MICRO COMPONENT AUDIO SYSTEM CD-R/RW PLAYBACK MM-S8 Instruction Manual
Safety Warnings GB CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTER LOCKS DEFEATED, AVOID EXPOSURE TO BEAM. CAUTION RISK OF ELECTRIC SHOCK.
Thank you for buying this SAMSUNG micro component system. Contents Please take time to read these instructions. They will allow you to operate your system with ease and take full advantage of its features. SAFETY WARNINGS .................................................................................................................................................................................. 2 INSTALLING YOUR MICRO COMPONENT SYSTEM Front Panel View ..................................................
Front Panel View GB 15 1 VOLUME 2 3 DEMO/ DIMMER 14 TUNER CD Band TAPE 4 5 6 AUX REV.MODE SRS WOW CD SYNC. STOP TUNING MODE OPEN/CLOSE /DOWN UP/ 13 12 11 10 9 PHONES 7 8 1. FUNCTION (TUNER/CD/TAPE) 9. 2. POWER (STANDBY/ON) 10. CD DOOR OPEN/CLOSE 3. DEMO/DIMMER 11. STOP 4. REVERSE MODE 12. SRS WOW 5. CD SYNCHRONIZE / RECORD/PAUSE 13. AUX 6. TUNING MODE 14. VOLUME 7. HEADPHONE JACK CONNECTOR 15. PUSH EJECT (CASSETTE DOOR 8.
Remote Control GB 1 25 24 MUTE 23 2 TUNER 3 4 5 TIMER/CLOCK TIMER ON/OFF AUX PROGRAM/SET REP. A B MO/ST SLEEP EQ/S.BASS SRS WOW CD SYNC. DISPLAY 22 BAND RDS 21 20 PTY 19 18 6 CD 7 8 TUNING 9 10 17 VOLUME TUNING MODE REPEAT 16 15 +10 TA P E 14 11 12 13 1. PROGRAM/SET 14. TAPE FAST-FORWARD 2. POWER 15. VOLUME CONTROL 3. TUNER/BAND 16. REPEAT 4. AUX 17. CD PLAY/PAUSE 5. SLEEP 18. DISPLAY (RDS) 6. CD SYNC. / RECORD/PAUSE 19. PTY (RDS) 7.
Rear Panel View GB 1 2 3 4 L R 1. AM Aerial Connector Terminal 2. CD Digital Out jack 3. FM Aerial Connector Terminal 4. AUX-Input 5.
Where to Install Your Micro Component System Inserting Remote Control Batteries GB To take full advantage of your new micro component system, follow these installation instructions before connecting the unit. Install the system on a flat, stable surface. Never place this unit on carpeting. Never place this unit in an outdoor area. Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.
Connecting to an External Source Speaker Connection GB The auxiliary input can be used to take advantage of the sound quality of your micro component system when listening to other sources. Examples: A television A video disc player A Hi-Fi stereo video cassette recorder To connect the external source, the source must have an audio output. In addition, you need an RCA connection cable. 1 Set the system to standby mode and disconnect it and the external source from the main.
Connecting the AM (MW)/LW Aerial GB The AM aerial (for long and medium waves) can be: Placed on a stable surface Fixed to the wall (you must first remove the base) The AM aerial connector terminals are located on the rear of the system and are marked AM . To avoid noise interference, check that the loudspeaker wires do not run close to the aerial wires. Always keep them at least 2 inches (5 cm) away. L R Connecting the FM Aerial How to connect a COAXIAL TYPE aerial.
Setting the Clock DEMO Function GB You can view the various functions available on your system. 1 Press the DEMO/DIMMER button. Result: The various functions available are listed in turn on the display. Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock: When you first purchase the micro component system After a power failure After unplugging the unit All these functions are described in detail in this booklet.
Listening to a Compact Disc Selecting a Track GB You can play 12 cm or 8 cm compact discs without an adapter. You can select the track you wish to listen to, either when the compact disc player is stopped or when a disc is playing. This unit has been designed to playback the CDs: Audio CD, CD Text, CD-R and CD-RW. To start playback at the beginning of the... Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit. Press...
Function to skip through 10 tracks at a time REPEAT A↔B Function GB Press the +10 button briefly while playing back a CD. The track 10 tracks after the current one will then be played back. Example: If you want to select track 43 during playback of track 15, press the +10 button three times, and then press the button three times. When you select CD(TAPE) Repeat (A↔B) playback, the music passages to which you were listening is repeated 3 times. 1 Press CD( ) / TAPE( ) button.
Programming the Order of Playback Checking or Changing Programmed Tracks GB You can decide: You can check or change your selection of tracks at any time. The order of the track desired to listen The track not desired to listen A maximum of up to 24 order of tracks desired to listen may be programmed. Before selecting the track, the CD player should be stopped. This function may be used simultaneously with the CD Repeat function.
Searching for and Storing the Radio Stations GB You can store up to: You can listen to a stored radio station as follows: 15 FM stations 8 MW stations 7 LW stations 1 2 1 2 Switch the system on by pressing ( ). Select the required frequency band by pressing TUNER/BAND again on the front panel or BAND on the remote control. Result: The appropriate indication is displayed: FM Frequency Modulation AM(MW) Medium Wave LW Long Wave 3 Selecting a Stored Station To search for a station...
About RDS broadcasting This unit has the RDS (Radio Data System) function, which enables for the various information such as broadcasting station, radio text, time and 30 types of programs (News, Rock, Classic, etc.) to be received from the FM RDS station together with normal radio signal. 1 2 3 Press the ( ) button. Receive the FM radio. See the radio receiving method on the page 14.
PTY(Program Type) indication and PTY-SEARCH function GB ◆ The PTY information is composed of an identification symbol, which helps the FM radio to recognize the program type of each FM station. About PTY-SEARCH ◆ The below 30 PTY information is shown on the display by pressing the Pty button. 1 The FM and frequency appear on the display. If the e received station is transmitting the RDS information, r “RDS” lights up.
Selecting the Cassette Playback Mode Listening to a Cassette GB REC 1 2 Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 23. Switch the system on by pressing ( ). Open the cassette deck by pushing on the corner of the cover marked PUSH EJECT ( ) until you hear a click and then releasing it. REC Insert the pre-recorded cassette with the open edge of the tape facing downwards.
Recording a Compact Disc GB You can record a compact disc on a cassette in two different ways: 3 Load a compact disc. Synchronised recording Direct recording Press the OPEN/CLOSE button ( Synchronised recording This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice. 1 2 3 Switch the system on by pressing ( 4 Press the CD( ) button. Use the CD selection ( 5 Press the (REC/PAUSE) button. Recording will begin.
Timer Function GB The timer enables you to switch the system on or off at specific times. Example: You wish to wake up to music every morning. MUTE If you no longer want the system to be switched on or off automatically, you must cancel the timer. 1,9 TIMER/CLOCK2 TIMER ON/OFF TUNER BAND Before setting the timer, check that the current time is correct. For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. 1 2 3 4 5 AUX PROGRAM/SET EQ/S.
EQ/S.BASS Function SRS WOW Function GB Your micro component system is equipped with a preset equalizer that allows you to choose the most appropriate balance between treble and bass frequencies, according to the type of music you are listening to. The function of Power Sound amplifies bass and improves high key or bass twice as much for you to appreciate powerful real sound.
Setting the System to Switch off Automatically MUTE Function GB You can turn the sound off temporarily on your system. Example: You wish to answer a telephone call. 1 2 Press MUTE ( ). To switch the sound back on (at the same volume as before), press MUTE again or the VOLUME buttons. While listening to a compact disc or a cassette, you can set the system to switch off automatically Example: You wish to go to sleep to music. 1 Press SLEEP.
Cleaning Your Micro Component System Safety Precautions GB The following diagrams illustrate the precautions to be taken when using or moving your micro component system.
Precautions When Using Compact Discs Before Contacting the After-Sales Service GB Handle your compact discs with care. Always hold them by the edges to avoid leaving fingerprints on the shiny surface. When you have finished playing a compact disc, always put it back in its case. Do not fix paper or adhesive tape to the discs and do not write on the label. Clean them with a special-purpose cloth.
Technical Specifications GB SAMSUNG strives to improve its products at all times. Both the design specifications and these user instructions are thus subject to change without notice. RADIO LW Usable sensitivity 60 dB AM (MW) Signal/noise ratio 40 dB Usable sensitivity 56 dB Total harmonic distortion 2% FM Signal/noise ratio 60 dB Usable sensitivity 3 dB Total harmonic distortion 1.
THIS APPLIANCE IS MANUFACTURED BY: ELECTRONICS AH68-01330B
